Pull irq fixes from Borislav Petkov:

 - Fix a wrong ioremap size in mvebu-gicp

 - Remove yet another compile-test case for a driver which needs an
   additional dependency

 - Fix a lock inversion scenario in the IRQ unit test suite

 - Remove an impossible flag situation in gic-v5

 - Do not iounmap resources in gic-v5 which are managed by devm

 - Make sure stale, left-over interrupts in mvebu-gicp are cleared on
   driver init

 - Fix a reference counting mishap in msi-lib

 - Fix a dereference-before-null-ptr-check case in the riscv-imsic
   irqchip driver

* tag 'irq_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/mvebu-gicp: Use resource_size() for ioremap()
  irqchip: Build IMX_MU_MSI only on ARM
  genirq/test: Resolve irq lock inversion warnings
  irqchip/gic-v5: Remove IRQD_RESEND_WHEN_IN_PROGRESS for ITS IRQs
  irqchip/gic-v5: iwb: Fix iounmap probe failure path
  irqchip/mvebu-gicp: Clear pending interrupts on init
  irqchip/msi-lib: Fix fwnode refcount in msi_lib_irq_domain_select()
  irqchip/riscv-imsic: Don't dereference before NULL pointer check

Pull EFI updates from Ard Biesheuvel:

 - Expose the OVMF firmware debug log via sysfs

 - Lower the default log level for the EFI stub to avoid corrupting any
   splash screens with unimportant diagnostic output

* tag 'efi-next-for-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi: add API doc entry for ovmf_debug_log
  efistub: Lower default log level
  efi: add ovmf debug log driver

Pull more block updates from Jens Axboe:

 - MD pull request via Yu:
      - mddev null-ptr-dereference fix, by Erkun
      - md-cluster fail to remove the faulty disk regression fix, by
        Heming
      - minor cleanup, by Li Nan and Jinchao
      - mdadm lifetime regression fix reported by syzkaller, by Yu Kuai

 - MD pull request via Christoph
      - add support for getting the FDP featuee in fabrics passthru path
        (Nitesh Shetty)
      - add capability to connect to an administrative controller
        (Kamaljit Singh)
      - fix a leak on sgl setup error (Keith Busch)
      - initialize discovery subsys after debugfs is initialized
        (Mohamed Khalfella)
      - fix various comment typos (Bjorn Helgaas)
      - remove unneeded semicolons (Jiapeng Chong)

 - nvmet debugfs ordering issue fix

 - Fix UAF in the tag_set in zloop

 - Ensure sbitmap shallow depth covers entire set

 - Reduce lock roundtrips in io context lookup

 - Move scheduler tags alloc/free out of elevator and freeze lock, to
   fix some lockdep found issues

 - Improve robustness of queue limits checking

 - Fix a regression with IO priorities, if no io context exists

* tag 'block-6.17-20250808' of git://git.kernel.dk/linux: (26 commits)
  lib/sbitmap: make sbitmap_get_shallow() internal
  lib/sbitmap: convert shallow_depth from one word to the whole sbitmap
  nvmet: exit debugfs after discovery subsystem exits
  block, bfq: Reorder struct bfq_iocq_bfqq_data
  md: make rdev_addable usable for rcu mode
  md/raid1: remove struct pool_info and related code
  md/raid1: change r1conf->r1bio_pool to a pointer type
  block: ensure discard_granularity is zero when discard is not supported
  zloop: fix KASAN use-after-free of tag set
  block: Fix default IO priority if there is no IO context
  nvme: fix various comment typos
  nvme-auth: remove unneeded semicolon
  nvme-pci: fix leak on sgl setup error
  nvmet: initialize discovery subsys after debugfs is initialized
  nvme: add capability to connect to an administrative controller
  nvmet: add support for FDP in fabrics passthru path
  md: rename recovery_cp to resync_offset
  md/md-cluster: handle REMOVE message earlier
  md: fix create on open mddev lifetime regression
  block: fix potential deadlock while running nr_hw_queue update
  ...

Pull spi fixes from Mark Brown:
 "There's one fix here for an issue with the CS42L43 where we were
  allocating a single property for client devices as just that property
  rather than a terminated array of properties like we are supposed to.

  We also have an update to the MAINTAINERS file for some Renesas
  devices"

* tag 'spi-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: cs42l43: Property entry should be a null-terminated array
  MAINTAINERS: Add entries for the RZ/V2H(P) RSPI

Pull regulator fix from Mark Brown:
 "This fixes an issue with the newly added code for handling large
  voltage changes on regulators which require that individual voltage
  changes cover a limited range, the check for convergence was broken"

* tag 'regulator-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: core: correct convergence check in regulator_set_voltage()

Pull regmap fixes from Mark Brown:
 "These patches fix a lockdep issue Russell King reported with nested
  regmap-irqs (unusual since regmap is generally for devices on slow
  buses so devices don't get nested), plus add a missing mutex free
  which I noticed while implementing a fix for that issue"

* tag 'regmap-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: irq: Avoid lockdep warnings with nested regmap-irq chips
  regmap: irq: Free the regmap-irq mutex

Pull pci fix from Bjorn Helgaas:

 - Fix vmd MSI interrupt domain restructure that caused crash early in
   boot (Nam Cao)

* tag 'pci-v6.17-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  PCI: vmd: Fix wrong kfree() in vmd_msi_free()

Pull mailbox updates from Jassi Brar:

 - aspeed: add driver and bindings for ast2700

 - broadcom: add driver and bindings for bcm74110

 - mediatek: fix RPM api usage

 - qcom: use dev_fwnode

 - pcc: support shared buffer

 - misc dt-bindings cleanup

* tag 'mailbox-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
  mailbox/pcc: support mailbox management of the shared buffer
  mailbox: bcm74110: Fix spelling mistake
  mailbox: bcm74110: remove unneeded semicolon
  mailbox: aspeed: add mailbox driver for AST27XX series SoC
  dt-bindings: mailbox: Add ASPEED AST2700 series SoC
  dt-bindings: mailbox: Drop consumers example DTS
  dt-bindings: mailbox: nvidia,tegra186-hsp: Use generic node name
  dt-bindings: mailbox: Correct example indentation
  dt-bindings: mailbox: ti,secure-proxy: Add missing reg maxItems
  dt-bindings: mailbox: amlogic,meson-gxbb-mhu: Add missing interrupts maxItems
  dt-bindings: mailbox: qcom-ipcc: document the Milos Inter-Processor Communication Controller
  mailbox: Add support for bcm74110
  dt-bindings: mailbox: Add support for bcm74110
  mailbox: Use dev_fwnode()
  mailbox: mtk-cmdq: Switch to pm_runtime_put_autosuspend()

Pull gpio updates from Bartosz Golaszewski:
 "As discussed: there's a small commit that removes the legacy GPIO line
  value setter callbacks as they're no longer used and a big, treewide
  commit that renames the new ones to the old names across all GPIO
  drivers at once.

  While at it: there are also two fixes that I picked up over the course
  of the merge window:

   - remove unused, legacy GPIO line value setters from struct gpio_chip

   - rename the new set callbacks back to the original names treewide

   - fix interrupt handling in gpio-mlxbf2

   - revert a buggy immutable irqchip conversion"

* tag 'gpio-updates-for-v6.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  treewide: rename GPIO set callbacks back to their original names
  gpio: remove legacy GPIO line value setter callbacks
  gpio: mlxbf2: use platform_get_irq_optional()
  Revert "gpio: pxa: Make irq_chip immutable"

Define a new, optional, callback that allows the driver to
specify how the return data buffer is allocated.  If that callback
is set,  mailbox/pcc.c is now responsible for reading from and
writing to the PCC shared buffer.

This also allows for proper checks of the Commnand complete flag
between the PCC sender and receiver.

For Type 4 channels, initialize the command complete flag prior
to accepting messages.

Since the mailbox does not know what memory allocation scheme
to use for response messages, the client now has an optional
callback that allows it to allocate the buffer for a response
message.

When an outbound message is written to the buffer, the mailbox
checks for the flag indicating the client wants an tx complete
notification via IRQ.  Upon receipt of the interrupt It will
pair it with the outgoing message. The expected use is to
free the kernel memory buffer for the previous outgoing message.

Signed-off-by: Adam Young <admiyo@os.amperecomputing.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>