linux-toradex.git/fs/btrfs/Makefile, branch v5.0

btrfs: Remove custom crc32c init code

2018-03-26T13:09:39+00:00

The custom crc32 init code was introduced in
14a958e678cd ("Btrfs: fix btrfs boot when compiled as built-in") to
enable using btrfs as a built-in. However, later as pointed out by
60efa5eb2e88 ("Btrfs: use late_initcall instead of module_init") this
wasn't enough and finally btrfs was switched to late_initcall which
comes after the generic crc32c implementation is initiliased. The
latter commit superseeded the former. Now that we don't have to
maintain our own code let's just remove it and switch to using the
generic implementation.

Despite touching a lot of files the patch is really simple. Here is the gist of
the changes:

1. Select LIBCRC32C rather than the low-level modules.
2. s/btrfs_crc32c/crc32c/g
3. replace hash.h with linux/crc32c.h
4. Move the btrfs namehash funcs to ctree.h and change the tree accordingly.

I've tested this with btrfs being both a module and a built-in and xfstest
doesn't complain.

Does seem to fix the longstanding problem of not automatically selectiong
the crc32c module when btrfs is used. Possibly there is a workaround in
dracut.

The modinfo confirms that now all the module dependencies are there:

before:
depends:        zstd_compress,zstd_decompress,raid6_pq,xor,zlib_deflate

after:
depends:        libcrc32c,zstd_compress,zstd_decompress,raid6_pq,xor,zlib_deflate

Signed-off-by: Nikolay Borisov 
Reviewed-by: David Sterba 
[ add more info to changelog from mails ]
Signed-off-by: David Sterba

Btrfs: add extent map selftests

2018-01-22T15:08:22+00:00

We've observed that btrfs_get_extent() and merge_extent_mapping() could
return -EEXIST in several cases, and they are caused by some racy
condition, e.g dio read vs dio write, which makes the problem very tricky
to reproduce.

This adds extent map selftests in order to simulate those racy situations.

Signed-off-by: Liu Bo 
Reviewed-by: Josef Bacik 
[ minor string adjustments ]
Signed-off-by: David Sterba

Merge branch 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

2017-11-14T21:35:29+00:00

Pull btrfs updates from David Sterba:
 "There are some new user features and the usual load of invisible
  enhancements or cleanups.

  New features:

   - extend mount options to specify zlib compression level, -o
     compress=zlib:9

   - v2 of ioctl "extent to inode mapping", addressing a usecase where
     we want to retrieve more but inaccurate results and do the
     postprocessing in userspace, aiding defragmentation or
     deduplication tools

   - populate compression heuristics logic, do data sampling and try to
     guess compressibility by: looking for repeated patterns, counting
     unique byte values and distribution, calculating Shannon entropy;
     this will need more benchmarking and possibly fine tuning, but the
     base should be good enough

   - enable indexing for btrfs as lower filesystem in overlayfs

   - speedup page cache readahead during send on large files

  Internal enhancements:

   - more sanity checks of b-tree items when reading them from disk

   - more EINVAL/EUCLEAN fixups, missing BLK_STS_* conversion, other
     errno or error handling fixes

   - remove some homegrown IO-related logic, that's been obsoleted by
     core block layer changes (batching, plug/unplug, own counters)

   - add ref-verify, optional debugging feature to verify extent
     reference accounting

   - simplify code handling outstanding extents, make it more clear
     where and how the accounting is done

   - make delalloc reservations per-inode, simplify the code and make
     the logic more straightforward

   - extensive cleanup of delayed refs code

  Notable fixes:

   - fix send ioctl on 32bit with 64bit kernel"

* 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (102 commits)
  btrfs: Fix bug for misused dev_t when lookup in dev state hash table.
  Btrfs: heuristic: add Shannon entropy calculation
  Btrfs: heuristic: add byte core set calculation
  Btrfs: heuristic: add byte set calculation
  Btrfs: heuristic: add detection of repeated data patterns
  Btrfs: heuristic: implement sampling logic
  Btrfs: heuristic: add bucket and sample counters and other defines
  Btrfs: compression: separate heuristic/compression workspaces
  btrfs: move btrfs_truncate_block out of trans handle
  btrfs: don't call btrfs_start_delalloc_roots in flushoncommit
  btrfs: track refs in a rb_tree instead of a list
  btrfs: add a comp_refs() helper
  btrfs: switch args for comp_*_refs
  btrfs: make the delalloc block rsv per inode
  btrfs: add tracepoints for outstanding extents mods
  Btrfs: rework outstanding_extents
  btrfs: increase output size for LOGICAL_INO_V2 ioctl
  btrfs: add a flags argument to LOGICAL_INO and call it LOGICAL_INO_V2
  btrfs: add a flag to iterate_inodes_from_logical to find all extent refs for uncompressed extents
  btrfs: send: remove unused code
  ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart 
Reviewed-by: Philippe Ombredanne 
Reviewed-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

Btrfs: add a extent ref verify tool

2017-10-30T11:28:00+00:00

We were having corruption issues that were tied back to problems with
the extent tree.  In order to track them down I built this tool to try
and find the culprit, which was pretty successful.  If you compile with
this tool on it will live verify every ref update that the fs makes and
make sure it is consistent and valid.  I've run this through with
xfstests and haven't gotten any false positives.  Thanks,

Signed-off-by: Josef Bacik 
Reviewed-by: David Sterba 
[ update error messages, add fixup from Dan Carpenter to handle errors
  of read_tree_block ]
Signed-off-by: David Sterba

btrfs: Move leaf and node validation checker to tree-checker.c

2017-10-30T11:27:58+00:00

It's no doubt the comprehensive tree block checker will become larger,
so moving them into their own files is quite reasonable.

Signed-off-by: Qu Wenruo 
[ wording adjustments ]
Signed-off-by: David Sterba

btrfs: Add zstd support

2017-08-15T16:02:09+00:00

Add zstd compression and decompression support to BtrFS. zstd at its
fastest level compresses almost as well as zlib, while offering much
faster compression and decompression, approaching lzo speeds.

I benchmarked btrfs with zstd compression against no compression, lzo
compression, and zlib compression. I benchmarked two scenarios. Copying
a set of files to btrfs, and then reading the files. Copying a tarball
to btrfs, extracting it to btrfs, and then reading the extracted files.
After every operation, I call `sync` and include the sync time.
Between every pair of operations I unmount and remount the filesystem
to avoid caching. The benchmark files can be found in the upstream
zstd source repository under
`contrib/linux-kernel/{btrfs-benchmark.sh,btrfs-extract-benchmark.sh}`
[1] [2].

I ran the benchmarks on a Ubuntu 14.04 VM with 2 cores and 4 GiB of RAM.
The VM is running on a MacBook Pro with a 3.1 GHz Intel Core i7 processor,
16 GB of RAM, and a SSD.

The first compression benchmark is copying 10 copies of the unzipped
Silesia corpus [3] into a BtrFS filesystem mounted with
`-o compress-force=Method`. The decompression benchmark times how long
it takes to `tar` all 10 copies into `/dev/null`. The compression ratio is
measured by comparing the output of `df` and `du`. See the benchmark file
[1] for details. I benchmarked multiple zstd compression levels, although
the patch uses zstd level 1.

| Method  | Ratio | Compression MB/s | Decompression speed |
|---------|-------|------------------|---------------------|
| None    |  0.99 |              504 |                 686 |
| lzo     |  1.66 |              398 |                 442 |
| zlib    |  2.58 |               65 |                 241 |
| zstd 1  |  2.57 |              260 |                 383 |
| zstd 3  |  2.71 |              174 |                 408 |
| zstd 6  |  2.87 |               70 |                 398 |
| zstd 9  |  2.92 |               43 |                 406 |
| zstd 12 |  2.93 |               21 |                 408 |
| zstd 15 |  3.01 |               11 |                 354 |

The next benchmark first copies `linux-4.11.6.tar` [4] to btrfs. Then it
measures the compression ratio, extracts the tar, and deletes the tar.
Then it measures the compression ratio again, and `tar`s the extracted
files into `/dev/null`. See the benchmark file [2] for details.

| Method | Tar Ratio | Extract Ratio | Copy (s) | Extract (s)| Read (s) |
|--------|-----------|---------------|----------|------------|----------|
| None   |      0.97 |          0.78 |    0.981 |      5.501 |    8.807 |
| lzo    |      2.06 |          1.38 |    1.631 |      8.458 |    8.585 |
| zlib   |      3.40 |          1.86 |    7.750 |     21.544 |   11.744 |
| zstd 1 |      3.57 |          1.85 |    2.579 |     11.479 |    9.389 |

[1] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/btrfs-benchmark.sh
[2] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/btrfs-extract-benchmark.sh
[3] http://sun.aei.polsl.pl/~sdeor/index.php?page=silesia
[4] https://cdn.kernel.org/pub/linux/kernel/v4.x/linux-4.11.6.tar.xz

zstd source repository: https://github.com/facebook/zstd

Signed-off-by: Nick Terrell 
Signed-off-by: Chris Mason

Btrfs: add free space tree sanity tests

2015-12-17T20:16:47+00:00

This tests the operations on the free space tree trying to excercise all
of the main cases for both formats. Between this and xfstests, the free
space tree should have pretty good coverage.

Signed-off-by: Omar Sandoval 
Signed-off-by: Chris Mason

Btrfs: implement the free space B-tree

2015-12-17T20:16:47+00:00

The free space cache has turned out to be a scalability bottleneck on
large, busy filesystems. When the cache for a lot of block groups needs
to be written out, we can get extremely long commit times; if this
happens in the critical section, things are especially bad because we
block new transactions from happening.

The main problem with the free space cache is that it has to be written
out in its entirety and is managed in an ad hoc fashion. Using a B-tree
to store free space fixes this: updates can be done as needed and we get
all of the benefits of using a B-tree: checksumming, RAID handling,
well-understood behavior.

With the free space tree, we get commit times that are about the same as
the no cache case with load times slower than the free space cache case
but still much faster than the no cache case. Free space is represented
with extents until it becomes more space-efficient to use bitmaps,
giving us similar space overhead to the free space cache.

The operations on the free space tree are: adding and removing free
space, handling the creation and deletion of block groups, and loading
the free space for a block group. We can also create the free space tree
by walking the extent tree and clear the free space tree.

Signed-off-by: Omar Sandoval 
Signed-off-by: Chris Mason

Btrfs: add sanity tests for new qgroup accounting code

2014-06-10T00:20:49+00:00

This exercises the various parts of the new qgroup accounting code.  We do some
basic stuff and do some things with the shared refs to make sure all that code
works.  I had to add a bunch of infrastructure because I needed to be able to
insert items into a fake tree without having to do all the hard work myself,
hopefully this will be usefull in the future.  Thanks,

Signed-off-by: Josef Bacik 
Signed-off-by: Chris Mason