linux-toradex.git/fs/btrfs/inode.c, branch v5.0

btrfs: wakeup cleaner thread when adding delayed iput

2019-01-18T16:27:23+00:00

The cleaner thread usually takes care of delayed iputs, with the
exception of the btrfs_end_transaction_throttle path.  Delaying iputs
means we are potentially delaying the eviction of an inode and it's
respective space.  The cleaner thread only gets woken up every 30
seconds, or when we require space.  If there are a lot of inodes that
need to be deleted we could induce a serious amount of latency while we
wait for these inodes to be evicted.  So instead wakeup the cleaner if
it's not already awake to process any new delayed iputs we add to the
list.  If we suddenly need space we will less likely be backed up
behind a bunch of inodes that are waiting to be deleted, and we could
possibly free space before we need to get into the flushing logic which
will save us some latency.

Reviewed-by: Filipe Manana 
Signed-off-by: Josef Bacik 
Signed-off-by: David Sterba

Revert "btrfs: balance dirty metadata pages in btrfs_finish_ordered_io"

2019-01-18T16:09:55+00:00

This reverts commit e73e81b6d0114d4a303205a952ab2e87c44bd279.

This patch causes a few problems:

- adds latency to btrfs_finish_ordered_io
- as btrfs_finish_ordered_io is used for free space cache, generating
  more work from btrfs_btree_balance_dirty_nodelay could end up in the
  same workque, effectively deadlocking

12260 kworker/u96:16+btrfs-freespace-write D
[<0>] balance_dirty_pages+0x6e6/0x7ad
[<0>] balance_dirty_pages_ratelimited+0x6bb/0xa90
[<0>] btrfs_finish_ordered_io+0x3da/0x770
[<0>] normal_work_helper+0x1c5/0x5a0
[<0>] process_one_work+0x1ee/0x5a0
[<0>] worker_thread+0x46/0x3d0
[<0>] kthread+0xf5/0x130
[<0>] ret_from_fork+0x24/0x30
[<0>] 0xffffffffffffffff

Transaction commit will wait on the freespace cache:

838 btrfs-transacti D
[<0>] btrfs_start_ordered_extent+0x154/0x1e0
[<0>] btrfs_wait_ordered_range+0xbd/0x110
[<0>] __btrfs_wait_cache_io+0x49/0x1a0
[<0>] btrfs_write_dirty_block_groups+0x10b/0x3b0
[<0>] commit_cowonly_roots+0x215/0x2b0
[<0>] btrfs_commit_transaction+0x37e/0x910
[<0>] transaction_kthread+0x14d/0x180
[<0>] kthread+0xf5/0x130
[<0>] ret_from_fork+0x24/0x30
[<0>] 0xffffffffffffffff

And then writepages ends up waiting on transaction commit:

9520 kworker/u96:13+flush-btrfs-1 D
[<0>] wait_current_trans+0xac/0xe0
[<0>] start_transaction+0x21b/0x4b0
[<0>] cow_file_range_inline+0x10b/0x6b0
[<0>] cow_file_range.isra.69+0x329/0x4a0
[<0>] run_delalloc_range+0x105/0x3c0
[<0>] writepage_delalloc+0x119/0x180
[<0>] __extent_writepage+0x10c/0x390
[<0>] extent_write_cache_pages+0x26f/0x3d0
[<0>] extent_writepages+0x4f/0x80
[<0>] do_writepages+0x17/0x60
[<0>] __writeback_single_inode+0x59/0x690
[<0>] writeback_sb_inodes+0x291/0x4e0
[<0>] __writeback_inodes_wb+0x87/0xb0
[<0>] wb_writeback+0x3bb/0x500
[<0>] wb_workfn+0x40d/0x610
[<0>] process_one_work+0x1ee/0x5a0
[<0>] worker_thread+0x1e0/0x3d0
[<0>] kthread+0xf5/0x130
[<0>] ret_from_fork+0x24/0x30
[<0>] 0xffffffffffffffff

Eventually, we have every process in the system waiting on
balance_dirty_pages(), and nobody is able to make progress on page
writeback.

The original patch tried to fix an OOM condition, that happened on 4.4 but no
success reproducing that on later kernels (4.19 and 4.20). This is more likely
a problem in OOM itself.

Link: https://lore.kernel.org/linux-btrfs/20180528054821.9092-1-ethanlien@synology.com/
Reported-by: Chris Mason 
CC: stable@vger.kernel.org # 4.18+
CC: ethanlien 
Signed-off-by: David Sterba

btrfs: Fix typos in comments and strings

2018-12-17T13:51:50+00:00

The typos accumulate over time so once in a while time they get fixed in
a large patch.

Signed-off-by: Andrea Gelmini 
Reviewed-by: David Sterba 
Signed-off-by: David Sterba

btrfs: improve error handling of btrfs_add_link

2018-12-17T13:51:50+00:00

In the error handling block, err holds the return value of either
btrfs_del_root_ref() or btrfs_del_inode_ref() but it hasn't been checked
since it's introduction with commit fe66a05a0679 (Btrfs: improve error
handling for btrfs_insert_dir_item callers) in 2012.

If the error handling in the error handling fails, there's not much left
to do and the abort either happened earlier in the callees or is
necessary here.

So if one of btrfs_del_root_ref() or btrfs_del_inode_ref() failed, abort
the transaction, but still return the original code of the failure
stored in 'ret' as this will be reported to the user.

Signed-off-by: Johannes Thumshirn 
Reviewed-by: David Sterba 
Signed-off-by: David Sterba

btrfs: fix truncate throttling

2018-12-17T13:51:47+00:00

We have a bunch of magic to make sure we're throttling delayed refs when
truncating a file.  Now that we have a delayed refs rsv and a mechanism
for refilling that reserve simply use that instead of all of this magic.

Reviewed-by: Nikolay Borisov 
Signed-off-by: Josef Bacik 
Signed-off-by: David Sterba

btrfs: rework btrfs_check_space_for_delayed_refs

2018-12-17T13:51:47+00:00

Now with the delayed_refs_rsv we can now know exactly how much pending
delayed refs space we need.  This means we can drastically simplify
btrfs_check_space_for_delayed_refs by simply checking how much space we
have reserved for the global rsv (which acts as a spill over buffer) and
the delayed refs rsv.  If our total size is beyond that amount then we
know it's time to commit the transaction and stop any more delayed refs
from being generated.

With the introduction of dealyed_refs_rsv infrastructure, namely
btrfs_update_delayed_refs_rsv we now know exactly how much pending
delayed refs space is required.

Reviewed-by: Nikolay Borisov 
Signed-off-by: Josef Bacik 
Signed-off-by: David Sterba

btrfs: use PAGE_ALIGNED instead of open-coding it

2018-12-17T13:51:45+00:00

When using a 'var & (PAGE_SIZE - 1)' construct one is checking for a page
alignment and thus should use the PAGE_ALIGNED() macro instead of
open-coding it.

Convert all open-coded occurrences of PAGE_ALIGNED().

Reviewed-by: Nikolay Borisov 
Signed-off-by: Johannes Thumshirn 
Reviewed-by: David Sterba 
Signed-off-by: David Sterba

btrfs: use offset_in_page instead of open-coding it

2018-12-17T13:51:45+00:00

Constructs like 'var & (PAGE_SIZE - 1)' or 'var & ~PAGE_MASK' can denote an
offset into a page.

So replace them by the offset_in_page() macro instead of open-coding it if
they're not used as an alignment check.

Reviewed-by: Nikolay Borisov 
Signed-off-by: Johannes Thumshirn 
Reviewed-by: David Sterba 
Signed-off-by: David Sterba

btrfs: Fix error handling in btrfs_cleanup_ordered_extents

2018-12-17T13:51:44+00:00

Running btrfs/124 in a loop hung up on me sporadically with the
following call trace:

btrfs D 0 5760 5324 0x00000000
Call Trace:
? __schedule+0x243/0x800
schedule+0x33/0x90
btrfs_start_ordered_extent+0x10c/0x1b0 [btrfs]
? wait_woken+0xa0/0xa0
btrfs_wait_ordered_range+0xbb/0x100 [btrfs]
btrfs_relocate_block_group+0x1ff/0x230 [btrfs]
btrfs_relocate_chunk+0x49/0x100 [btrfs]
btrfs_balance+0xbeb/0x1740 [btrfs]
btrfs_ioctl_balance+0x2ee/0x380 [btrfs]
btrfs_ioctl+0x1691/0x3110 [btrfs]
? lockdep_hardirqs_on+0xed/0x180
? __handle_mm_fault+0x8e7/0xfb0
? _raw_spin_unlock+0x24/0x30
? __handle_mm_fault+0x8e7/0xfb0
? do_vfs_ioctl+0xa5/0x6e0
? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs]
do_vfs_ioctl+0xa5/0x6e0
? entry_SYSCALL_64_after_hwframe+0x3e/0xbe
ksys_ioctl+0x3a/0x70
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x60/0x1b0
entry_SYSCALL_64_after_hwframe+0x49/0xbe

This happens because during page writeback it's valid for
writepage_delalloc to instantiate a delalloc range which doesn't belong
to the page currently being written back.

The reason this case is valid is due to find_lock_delalloc_range
returning any available range after the passed delalloc_start and
ignoring whether the page under writeback is within that range.

In turn ordered extents (OE) are always created for the returned range
from find_lock_delalloc_range. If, however, a failure occurs while OE
are being created then the clean up code in btrfs_cleanup_ordered_extents
will be called.

Unfortunately the code in btrfs_cleanup_ordered_extents doesn't consider
the case of such 'foreign' range being processed and instead it always
assumes that the range OE are created for belongs to the page. This
leads to the first page of such foregin range to not be cleaned up since
it's deliberately missed and skipped by the current cleaning up code.

Fix this by correctly checking whether the current page belongs to the
range being instantiated and if so adjsut the range parameters passed
for cleaning up. If it doesn't, then just clean the whole OE range
directly.

Fixes: 524272607e88 ("btrfs: Handle delalloc error correctly to avoid ordered extent hang")
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Josef Bacik
Signed-off-by: Nikolay Borisov
Signed-off-by: David Sterba

btrfs: skip file_extent generation check for free_space_inode in run_delalloc_nocow

2018-12-17T13:51:44+00:00

The test case btrfs/001 with inode_cache mount option will encounter the
following warning:

  WARNING: CPU: 1 PID: 23700 at fs/btrfs/inode.c:956 cow_file_range.isra.19+0x32b/0x430 [btrfs]
  CPU: 1 PID: 23700 Comm: btrfs Kdump: loaded Tainted: G        W  O      4.20.0-rc4-custom+ #30
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
  RIP: 0010:cow_file_range.isra.19+0x32b/0x430 [btrfs]
  Call Trace:
   ? free_extent_buffer+0x46/0x90 [btrfs]
   run_delalloc_nocow+0x455/0x900 [btrfs]
   btrfs_run_delalloc_range+0x1a7/0x360 [btrfs]
   writepage_delalloc+0xf9/0x150 [btrfs]
   __extent_writepage+0x125/0x3e0 [btrfs]
   extent_write_cache_pages+0x1b6/0x3e0 [btrfs]
   ? __wake_up_common_lock+0x63/0xc0
   extent_writepages+0x50/0x80 [btrfs]
   do_writepages+0x41/0xd0
   ? __filemap_fdatawrite_range+0x9e/0xf0
   __filemap_fdatawrite_range+0xbe/0xf0
   btrfs_fdatawrite_range+0x1b/0x50 [btrfs]
   __btrfs_write_out_cache+0x42c/0x480 [btrfs]
   btrfs_write_out_ino_cache+0x84/0xd0 [btrfs]
   btrfs_save_ino_cache+0x551/0x660 [btrfs]
   commit_fs_roots+0xc5/0x190 [btrfs]
   btrfs_commit_transaction+0x2bf/0x8d0 [btrfs]
   btrfs_mksubvol+0x48d/0x4d0 [btrfs]
   btrfs_ioctl_snap_create_transid+0x170/0x180 [btrfs]
   btrfs_ioctl_snap_create_v2+0x124/0x180 [btrfs]
   btrfs_ioctl+0x123f/0x3030 [btrfs]

The file extent generation of the free space inode is equal to the last
snapshot of the file root, so the inode will be passed to cow_file_rage.
But the inode was created and its extents were preallocated in
btrfs_save_ino_cache, there are no cow copies on disk.

The preallocated extent is not yet in the extent tree, and
btrfs_cross_ref_exist will ignore the -ENOENT returned by
check_committed_ref, so we can directly write the inode to the disk.

Fixes: 78d4295b1eee ("btrfs: lift some btrfs_cross_ref_exist checks in nocow path")
CC: stable@vger.kernel.org # 4.18+
Reviewed-by: Filipe Manana 
Signed-off-by: Lu Fengqi 
Signed-off-by: David Sterba