linux-toradex.git/fs/ceph/inode.c, branch v6.7

Merge tag 'ceph-for-6.7-rc1' of https://github.com/ceph/ceph-client

2023-11-10T17:52:56+00:00

Pull ceph updates from Ilya Dryomov:

 - support for idmapped mounts in CephFS (Christian Brauner, Alexander
   Mikhalitsyn).

   The series was originally developed by Christian and later picked up
   and brought over the finish line by Alexander, who also contributed
   an enabler on the MDS side (separate owner_{u,g}id fields on the
   wire).

   The required exports for mnt_idmap_{get,put}() in VFS have been acked
   by Christian and received no objection from Christoph.

 - a churny change in CephFS logging to include cluster and client
   identifiers in log and debug messages (Xiubo Li).

   This would help in scenarios with dozens of CephFS mounts on the same
   node which are getting increasingly common, especially in the
   Kubernetes world.

* tag 'ceph-for-6.7-rc1' of https://github.com/ceph/ceph-client:
  ceph: allow idmapped mounts
  ceph: allow idmapped atomic_open inode op
  ceph: allow idmapped set_acl inode op
  ceph: allow idmapped setattr inode op
  ceph: pass idmap to __ceph_setattr
  ceph: allow idmapped permission inode op
  ceph: allow idmapped getattr inode op
  ceph: pass an idmapping to mknod/symlink/mkdir
  ceph: add enable_unsafe_idmap module parameter
  ceph: handle idmapped mounts in create_request_message()
  ceph: stash idmapping in mdsc request
  fs: export mnt_idmap_get/mnt_idmap_put
  libceph, ceph: move mdsmap.h to fs/ceph
  ceph: print cluster fsid and client global_id in all debug logs
  ceph: rename _to_client() to _to_fs_client()
  ceph: pass the mdsc to several helpers
  libceph: add doutc and *_client debug macros support

ceph: allow idmapped setattr inode op

2023-11-03T22:28:34+00:00

Enable __ceph_setattr() to handle idmapped mounts. This is just a matter
of passing down the mount's idmapping.

[ aleksandr.mikhalitsyn: adapted to b27c82e12965 ("attr: port attribute
  changes to new types") ]

Signed-off-by: Christian Brauner 
Signed-off-by: Alexander Mikhalitsyn 
Reviewed-by: Xiubo Li 
Signed-off-by: Ilya Dryomov

ceph: pass idmap to __ceph_setattr

2023-11-03T22:28:34+00:00

Just pass down the mount's idmapping to __ceph_setattr,
because we will need it later.

Signed-off-by: Alexander Mikhalitsyn 
Acked-by: Christian Brauner 
Reviewed-by: Xiubo Li 
Signed-off-by: Ilya Dryomov

ceph: allow idmapped permission inode op

2023-11-03T22:28:34+00:00

Enable ceph_permission() to handle idmapped mounts. This is just a
matter of passing down the mount's idmapping.

Signed-off-by: Christian Brauner 
Signed-off-by: Alexander Mikhalitsyn 
Reviewed-by: Xiubo Li 
Signed-off-by: Ilya Dryomov

ceph: allow idmapped getattr inode op

2023-11-03T22:28:34+00:00

Enable ceph_getattr() to handle idmapped mounts. This is just a matter
of passing down the mount's idmapping.

Signed-off-by: Christian Brauner 
Signed-off-by: Alexander Mikhalitsyn 
Reviewed-by: Xiubo Li 
Signed-off-by: Ilya Dryomov

ceph: print cluster fsid and client global_id in all debug logs

2023-11-03T22:28:33+00:00

Multiple CephFS mounts on a host is increasingly common so
disambiguating messages like this is necessary and will make it easier
to debug issues.

At the same this will improve the debug logs to make them easier to
troubleshooting issues, such as print the ino# instead only printing
the memory addresses of the corresponding inodes and print the dentry
names instead of the corresponding memory addresses for the dentry,etc.

Link: https://tracker.ceph.com/issues/61590
Signed-off-by: Xiubo Li 
Reviewed-by: Patrick Donnelly 
Reviewed-by: Milind Changire 
Signed-off-by: Ilya Dryomov

ceph: rename _to_client() to _to_fs_client()

2023-11-03T22:28:33+00:00

We need to covert the inode to ceph_client in the following commit,
and will add one new helper for that, here we rename the old helper
to _fs_client().

Link: https://tracker.ceph.com/issues/61590
Signed-off-by: Xiubo Li 
Reviewed-by: Patrick Donnelly 
Reviewed-by: Milind Changire 
Signed-off-by: Ilya Dryomov

Merge tag 'vfs-6.7.ctime' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs

2023-10-30T19:47:13+00:00

Pull vfs inode time accessor updates from Christian Brauner:
 "This finishes the conversion of all inode time fields to accessor
  functions as discussed on list. Changing timestamps manually as we
  used to do before is error prone. Using accessors function makes this
  robust.

  It does not contain the switch of the time fields to discrete 64 bit
  integers to replace struct timespec and free up space in struct inode.
  But after this, the switch can be trivially made and the patch should
  only affect the vfs if we decide to do it"

* tag 'vfs-6.7.ctime' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (86 commits)
  fs: rename inode i_atime and i_mtime fields
  security: convert to new timestamp accessors
  selinux: convert to new timestamp accessors
  apparmor: convert to new timestamp accessors
  sunrpc: convert to new timestamp accessors
  mm: convert to new timestamp accessors
  bpf: convert to new timestamp accessors
  ipc: convert to new timestamp accessors
  linux: convert to new timestamp accessors
  zonefs: convert to new timestamp accessors
  xfs: convert to new timestamp accessors
  vboxsf: convert to new timestamp accessors
  ufs: convert to new timestamp accessors
  udf: convert to new timestamp accessors
  ubifs: convert to new timestamp accessors
  tracefs: convert to new timestamp accessors
  sysv: convert to new timestamp accessors
  squashfs: convert to new timestamp accessors
  server: convert to new timestamp accessors
  client: convert to new timestamp accessors
  ...

ceph: convert to new timestamp accessors

2023-10-18T11:26:19+00:00

Convert to using the new inode timestamp accessor functions.

Signed-off-by: Jeff Layton 
Link: https://lore.kernel.org/r/20231004185347.80880-22-jlayton@kernel.org
Signed-off-by: Christian Brauner

ceph: fix incorrect revoked caps assert in ceph_fill_file_size()

2023-10-09T11:35:24+00:00

When truncating the inode the MDS will acquire the xlock for the
ifile Locker, which will revoke the 'Frwsxl' caps from the clients.
But when the client just releases and flushes the 'Fw' caps to MDS,
for exmaple, and once the MDS receives the caps flushing msg it
just thought the revocation has finished. Then the MDS will continue
truncating the inode and then issued the truncate notification to
all the clients. While just before the clients receives the cap
flushing ack they receive the truncation notification, the clients
will detecte that the 'issued | dirty' is still holding the 'Fw'
caps.

Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/56693
Fixes: b0d7c2231015 ("ceph: introduce i_truncate_mutex")
Signed-off-by: Xiubo Li 
Reviewed-by: Milind Changire 
Signed-off-by: Ilya Dryomov