linux-toradex.git/fs/debugfs, branch v5.12-rc7

Merge tag 'driver-core-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2021-02-24T18:13:55+00:00

Pull driver core / debugfs update from Greg KH:
 "Here is the "big" driver core and debugfs update for 5.12-rc1

  This set of driver core patches caused a bunch of problems in
  linux-next for the past few weeks, when Saravana tried to set
  fw_devlink=on as the default functionality. This caused a number of
  systems to stop booting, and lots of bugs were fixed in this area for
  almost all of the reported systems, but this option is not ready to be
  turned on just yet for the default operation based on this testing, so
  I've reverted that change at the very end so we don't have to worry
  about regressions in 5.12

  We will try to turn this on for 5.13 if testing goes better over the
  next few months.

  Other than the fixes caused by the fw_devlink testing in here, there's
  not much more:

   - debugfs fixes for invalid input into debugfs_lookup()

   - kerneldoc cleanups

   - warn message if platform drivers return an error on their remove
     callback (a futile effort, but good to catch).

  All of these have been in linux-next for a while now, and the
  regressions have gone away with the revert of the fw_devlink change"

* tag 'driver-core-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (35 commits)
  Revert "driver core: Set fw_devlink=on by default"
  of: property: fw_devlink: Ignore interrupts property for some configs
  debugfs: do not attempt to create a new file before the filesystem is initalized
  debugfs: be more robust at handling improper input in debugfs_lookup()
  driver core: auxiliary bus: Fix calling stage for auxiliary bus init
  of: irq: Fix the return value for of_irq_parse_one() stub
  of: irq: make a stub for of_irq_parse_one()
  clk: Mark fwnodes when their clock provider is added/removed
  PM: domains: Mark fwnodes when their powerdomain is added/removed
  irqdomain: Mark fwnodes when their irqdomain is added/removed
  driver core: fw_devlink: Handle suppliers that don't use driver core
  of: property: Add fw_devlink support for optional properties
  driver core: Add fw_devlink.strict kernel param
  of: property: Don't add links to absent suppliers
  driver core: fw_devlink: Detect supplier devices that will never be added
  driver core: platform: Emit a warning if a remove callback returned non-zero
  of: property: Fix fw_devlink handling of interrupts/interrupts-extended
  gpiolib: Don't probe gpio_device if it's not the primary device
  device.h: Remove bogus "the" in kerneldoc
  gpiolib: Bind gpio_device to a driver to enable fw_devlink=on by default
  ...

debugfs: do not attempt to create a new file before the filesystem is initalized

2021-02-18T15:23:49+00:00

Some subsystems want to add debugfs files at early boot, way before
debugfs is initialized.  This seems to work somehow as the vfs layer
will not allow it to happen, but let's be explicit and test to ensure we
are properly up and running before allowing files to be created.

Cc: "Rafael J. Wysocki" 
Cc: stable 
Reported-by: Michael Walle 
Reported-by: Marc Zyngier 
Link: https://lore.kernel.org/r/20210218100818.3622317-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman

debugfs: be more robust at handling improper input in debugfs_lookup()

2021-02-18T15:23:46+00:00

debugfs_lookup() doesn't like it if it is passed an illegal name
pointer, or if the filesystem isn't even initialized yet.  If either of
these happen, it will crash the system, so fix it up by properly testing
for valid input and that we are up and running before trying to find a
file in the filesystem.

Cc: "Rafael J. Wysocki" 
Cc: stable 
Reported-by: Michael Walle 
Tested-by: Michael Walle 
Tested-by: Marc Zyngier 
Link: https://lore.kernel.org/r/20210218100818.3622317-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman

fs: make helpers idmap mount aware

2021-01-24T13:27:20+00:00

Extend some inode methods with an additional user namespace argument. A
filesystem that is aware of idmapped mounts will receive the user
namespace the mount has been marked with. This can be used for
additional permission checking and also to enable filesystems to
translate between uids and gids if they need to. We have implemented all
relevant helpers in earlier patches.

As requested we simply extend the exisiting inode method instead of
introducing new ones. This is a little more code churn but it's mostly
mechanical and doesnt't leave us with additional inode methods.

Link: https://lore.kernel.org/r/20210121131959.646623-25-christian.brauner@ubuntu.com
Cc: Christoph Hellwig 
Cc: David Howells 
Cc: Al Viro 
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig 
Signed-off-by: Christian Brauner

debugfs: remove return value of debugfs_create_devm_seqfile()

2020-10-30T07:37:39+00:00

No one checks the return value of debugfs_create_devm_seqfile(), as it's
not needed, so make the return value void, so that no one tries to do so
in the future.

Link: https://lore.kernel.org/r/20201023131037.2500765-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman

debugfs: Fix module state check condition

2020-09-04T16:12:52+00:00

The '#ifdef MODULE' check in the original commit does not work as intended.
The code under the check is not built at all if CONFIG_DEBUG_FS=y. Fix this
by using a correct check.

Fixes: 275678e7a9be ("debugfs: Check module state before warning in {full/open}_proxy_open()")
Signed-off-by: Vladis Dronov 
Cc: stable 
Link: https://lore.kernel.org/r/20200811150129.53343-1-vdronov@redhat.com
Signed-off-by: Greg Kroah-Hartman

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2020-08-06T03:13:21+00:00

Pull networking updates from David Miller:

 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.

 2) Support UDP segmentation in code TSO code, from Eric Dumazet.

 3) Allow flashing different flash images in cxgb4 driver, from Vishal
    Kulkarni.

 4) Add drop frames counter and flow status to tc flower offloading,
    from Po Liu.

 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.

 6) Various new indirect call avoidance, from Eric Dumazet and Brian
    Vazquez.

 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
    Yonghong Song.

 8) Support querying and setting hardware address of a port function via
    devlink, use this in mlx5, from Parav Pandit.

 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.

10) Switch qca8k driver over to phylink, from Jonathan McDowell.

11) In bpftool, show list of processes holding BPF FD references to
    maps, programs, links, and btf objects. From Andrii Nakryiko.

12) Several conversions over to generic power management, from Vaibhav
    Gupta.

13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
    Yakunin.

14) Various https url conversions, from Alexander A. Klimov.

15) Timestamping and PHC support for mscc PHY driver, from Antoine
    Tenart.

16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.

17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.

18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.

19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
    drivers. From Luc Van Oostenryck.

20) XDP support for xen-netfront, from Denis Kirjanov.

21) Support receive buffer autotuning in MPTCP, from Florian Westphal.

22) Support EF100 chip in sfc driver, from Edward Cree.

23) Add XDP support to mvpp2 driver, from Matteo Croce.

24) Support MPTCP in sock_diag, from Paolo Abeni.

25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
    infrastructure, from Jakub Kicinski.

26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.

27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.

28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.

29) Refactor a lot of networking socket option handling code in order to
    avoid set_fs() calls, from Christoph Hellwig.

30) Add rfc4884 support to icmp code, from Willem de Bruijn.

31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.

32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.

33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.

34) Support TCP syncookies in MPTCP, from Flowian Westphal.

35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
    Brivio.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
  net: thunderx: initialize VF's mailbox mutex before first usage
  usb: hso: remove bogus check for EINPROGRESS
  usb: hso: no complaint about kmalloc failure
  hso: fix bailout in error case of probe
  ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
  selftests/net: relax cpu affinity requirement in msg_zerocopy test
  mptcp: be careful on subflow creation
  selftests: rtnetlink: make kci_test_encap() return sub-test result
  selftests: rtnetlink: correct the final return value for the test
  net: dsa: sja1105: use detected device id instead of DT one on mismatch
  tipc: set ub->ifindex for local ipv6 address
  ipv6: add ipv6_dev_find()
  net: openvswitch: silence suspicious RCU usage warning
  Revert "vxlan: fix tos value before xmit"
  ptp: only allow phase values lower than 1 period
  farsync: switch from 'pci_' to 'dma_' API
  wan: wanxl: switch from 'pci_' to 'dma_' API
  hv_netvsc: do not use VF device if link is down
  dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
  net: macb: Properly handle phylink on at91sam9x
  ...

debugfs: Add access restriction option

2020-07-23T15:10:25+00:00

Since debugfs include sensitive information it need to be treated
carefully. But it also has many very useful debug functions for userspace.
With this option we can have same configuration for system with
need of debugfs and a way to turn it off. This gives a extra protection
for exposure on systems where user-space services with system
access are attacked.

It is controlled by a configurable default value that can be override
with a kernel command line parameter. (debugfs=)

It can be on or off, but also internally on but not seen from user-space.
This no-mount mode do not register a debugfs as filesystem, but client can
register their parts in the internal structures. This data can be readed
with a debugger or saved with a crashkernel. When it is off clients
get EPERM error when accessing the functions for registering their
components.

Signed-off-by: Peter Enderborg 
Link: https://lore.kernel.org/r/20200716071511.26864-3-peter.enderborg@sony.com
Signed-off-by: Greg Kroah-Hartman

debugfs: make sure we can remove u32_array files cleanly

2020-07-10T20:54:00+00:00

debugfs_create_u32_array() allocates a small structure to wrap
the data and size information about the array. If users ever
try to remove the file this leads to a leak since nothing ever
frees this wrapper.

That said there are no upstream users of debugfs_create_u32_array()
that'd remove a u32 array file (we only have one u32 array user in
CMA), so there is no real bug here.

Make callers pass a wrapper they allocated. This way the lifetime
management of the wrapper is on the caller, and we can avoid the
potential leak in debugfs.

CC: Chucheng Luo 
Signed-off-by: Jakub Kicinski 
Reviewed-by: Greg Kroah-Hartman 
Signed-off-by: David S. Miller

debugfs: file: Remove unnecessary cast in kfree()

2020-07-10T13:07:56+00:00

Remove unnecassary casts in the argument to kfree.

Signed-off-by: Xu Wang 
Link: https://lore.kernel.org/r/20200709054033.30148-1-vulab@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman