We get lower layer dentries, find their parents, do lock_rename() and
proceed to vfs_rename().  However, we do not check that dentries still
have the same parents and are not unlinked.  Need to check that...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull vfs fixes from Al Viro:
 "Assorted fixes all over the place"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  aio: fix io_destroy(2) vs. lookup_ioctx() race
  ext2: fix a block leak
  nfsd: vfs_mkdir() might succeed leaving dentry negative unhashed
  cachefiles: vfs_mkdir() might succeed leaving dentry negative unhashed
  unfuck sysfs_mount()
  kernfs: deal with kernfs_fill_super() failures
  cramfs: Fix IS_ENABLED typo
  befs_lookup(): use d_splice_alias()
  affs_lookup: switch to d_splice_alias()
  affs_lookup(): close a race with affs_remove_link()
  fix breakage caused by d_find_alias() semantics change
  fs: don't scan the inode cache before SB_BORN is set
  do d_instantiate/unlock_new_inode combinations safely
  iov_iter: fix memory leak in pipe_get_pages_alloc()
  iov_iter: fix return type of __pipe_get_pages()

For anything NFS-exported we do _not_ want to unlock new inode
before it has grown an alias; original set of fixes got the
ordering right, but missed the nasty complication in case of
lockdep being enabled - unlock_new_inode() does
	lockdep_annotate_inode_mutex_key(inode)
which can only be done before anyone gets a chance to touch
->i_mutex.  Unfortunately, flipping the order and doing
unlock_new_inode() before d_instantiate() opens a window when
mkdir can race with open-by-fhandle on a guessed fhandle, leading
to multiple aliases for a directory inode and all the breakage
that follows from that.

	Correct solution: a new primitive (d_instantiate_new())
combining these two in the right order - lockdep annotate, then
d_instantiate(), then the rest of unlock_new_inode().  All
combinations of d_instantiate() with unlock_new_inode() should
be converted to that.

Cc: stable@kernel.org	# 2.6.29 and later
Tested-by: Mike Marshall <hubcap@omnibond.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Both ecryptfs_filldir() and ecryptfs_readlink_lower() use
ecryptfs_decode_and_decrypt_filename() to translate lower filenames to
upper filenames. The function correctly passes up lower filenames,
unchanged, when filename encryption isn't in use. However, it was also
passing up lower filenames when the filename wasn't encrypted or
when decryption failed. Since 88ae4ab9802e, eCryptfs refuses to lookup
lower plaintext names when filename encryption is enabled so this
resulted in a situation where userspace would see lower plaintext
filenames in calls to getdents(2) but then not be able to lookup those
filenames.

An example of this can be seen when enabling filename encryption on an
eCryptfs mount at the root directory of an Ext4 filesystem:

$ ls -1i /lower
12 ECRYPTFS_FNEK_ENCRYPTED.FWYZD8TcW.5FV-TKTEYOHsheiHX9a-w.NURCCYIMjI8pn5BDB9-h3fXwrE--
11 lost+found
$ ls -1i /upper
ls: cannot access '/upper/lost+found': No such file or directory
 ? lost+found
12 test

With this change, the lower lost+found dentry is ignored:

$ ls -1i /lower
12 ECRYPTFS_FNEK_ENCRYPTED.FWYZD8TcW.5FV-TKTEYOHsheiHX9a-w.NURCCYIMjI8pn5BDB9-h3fXwrE--
11 lost+found
$ ls -1i /upper
12 test

Additionally, some potentially noisy error/info messages in the related
code paths are turned into debug messages so that the logs can't be
easily filled.

Fixes: 88ae4ab9802e ("ecryptfs_lookup(): try either only encrypted or plaintext name")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>

Trivial fix to spelling mistake in debug message text.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>

mount_crypt_stat is assigned to
&ecryptfs_superblock_to_private(ecryptfs_dentry->d_sb)->mount_crypt_stat,
and mount_crypt_stat is not the first object in struct ecryptfs_sb_info.
mount_crypt_stat is therefore never NULL. At the same time, no crash
in ecryptfs_lookup() has been reported, and the lookup functions in
other file systems don't check if d_sb is NULL either.
Given that, remove the NULL check.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>

This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:

    for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
        L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
        for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
    done

with de-mangling cleanups yet to come.

NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do.  But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.

The next patch from Al will sort out the final differences, and we
should be all done.

Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull poll annotations from Al Viro:
 "This introduces a __bitwise type for POLL### bitmap, and propagates
  the annotations through the tree. Most of that stuff is as simple as
  'make ->poll() instances return __poll_t and do the same to local
  variables used to hold the future return value'.

  Some of the obvious brainos found in process are fixed (e.g. POLLIN
  misspelled as POLL_IN). At that point the amount of sparse warnings is
  low and most of them are for genuine bugs - e.g. ->poll() instance
  deciding to return -EINVAL instead of a bitmap. I hadn't touched those
  in this series - it's large enough as it is.

  Another problem it has caught was eventpoll() ABI mess; select.c and
  eventpoll.c assumed that corresponding POLL### and EPOLL### were
  equal. That's true for some, but not all of them - EPOLL### are
  arch-independent, but POLL### are not.

  The last commit in this series separates userland POLL### values from
  the (now arch-independent) kernel-side ones, converting between them
  in the few places where they are copied to/from userland. AFAICS, this
  is the least disruptive fix preserving poll(2) ABI and making epoll()
  work on all architectures.

  As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and
  it will trigger only on what would've triggered EPOLLWRBAND on other
  architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered
  at all on sparc. With this patch they should work consistently on all
  architectures"

* 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
  make kernel-side POLL... arch-independent
  eventpoll: no need to mask the result of epi_item_poll() again
  eventpoll: constify struct epoll_event pointers
  debugging printk in sg_poll() uses %x to print POLL... bitmap
  annotate poll(2) guts
  9p: untangle ->poll() mess
  ->si_band gets POLL... bitmap stored into a user-visible long field
  ring_buffer_poll_wait() return value used as return value of ->poll()
  the rest of drivers/*: annotate ->poll() instances
  media: annotate ->poll() instances
  fs: annotate ->poll() instances
  ipc, kernel, mm: annotate ->poll() instances
  net: annotate ->poll() instances
  apparmor: annotate ->poll() instances
  tomoyo: annotate ->poll() instances
  sound: annotate ->poll() instances
  acpi: annotate ->poll() instances
  crypto: annotate ->poll() instances
  block: annotate ->poll() instances
  x86: annotate ->poll() instances
  ...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

This is a pure automated search-and-replace of the internal kernel
superblock flags.

The s_flags are now called SB_*, with the names and the values for the
moment mirroring the MS_* flags that they're equivalent to.

Note how the MS_xyz flags are the ones passed to the mount system call,
while the SB_xyz flags are what we then use in sb->s_flags.

The script to do this was:

    # places to look in; re security/*: it generally should *not* be
    # touched (that stuff parses mount(2) arguments directly), but
    # there are two places where we really deal with superblock flags.
    FILES="drivers/mtd drivers/staging/lustre fs ipc mm \
            include/linux/fs.h include/uapi/linux/bfs_fs.h \
            security/apparmor/apparmorfs.c security/apparmor/include/lib.h"
    # the list of MS_... constants
    SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \
          DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \
          POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \
          I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \
          ACTIVE NOUSER"

    SED_PROG=
    for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done

    # we want files that contain at least one of MS_...,
    # with fs/namespace.c and fs/pnode.c excluded.
    L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c')

    for f in $L; do sed -i $f $SED_PROG; done

Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>