Pull vfs fanotify fsid updates from Christian Brauner:
 "This work is part of the plan to enable fanotify to serve as a drop-in
  replacement for inotify. While inotify is availabe on all filesystems,
  fanotify currently isn't.

  In order to support fanotify on all filesystems two things are needed:

   (1) all filesystems need to support AT_HANDLE_FID

   (2) all filesystems need to report a non-zero f_fsid

  This contains (1) and allows filesystems to encode non-decodable file
  handlers for fanotify without implementing any exportfs operations by
  encoding a file id of type FILEID_INO64_GEN from i_ino and
  i_generation.

  Filesystems that want to opt out of encoding non-decodable file ids
  for fanotify that don't support NFS export can do so by providing an
  empty export_operations struct.

  This also partially addresses (2) by generating f_fsid for simple
  filesystems as well as freevxfs. Remaining filesystems will be dealt
  with by separate patches.

  Finally, this contains the patch from the current exportfs maintainers
  which moves exportfs under vfs with Chuck, Jeff, and Amir as
  maintainers and vfs.git as tree"

* tag 'vfs-6.7.fsid' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  MAINTAINERS: create an entry for exportfs
  fs: fix build error with CONFIG_EXPORTFS=m or not defined
  freevxfs: derive f_fsid from bdev->bd_dev
  fs: report f_fsid from s_dev for "simple" filesystems
  exportfs: support encoding non-decodeable file handles by default
  exportfs: define FILEID_INO64_GEN* file handle types
  exportfs: make ->encode_fh() a mandatory method for NFS export
  exportfs: add helpers to check if filesystem can encode/decode file handles

Pull EFI update from Ard Biesheuvel:
 "This is the only remaining EFI change, as everything else was taken
  via -tip this cycle:

   - implement uid/gid mount options for efivarfs"

* tag 'efi-next-for-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efivarfs: Add uid/gid mount options

There are many "simple" filesystems (*) that report null f_fsid in
statfs(2).  Those "simple" filesystems report sb->s_dev as the st_dev
field of the stat syscalls for all inodes of the filesystem (**).

In order to enable fanotify reporting of events with fsid on those
"simple" filesystems, report the sb->s_dev number in f_fsid field of
statfs(2).

(*) For most of the "simple" filesystem refered to in this commit, the
->statfs() operation is simple_statfs(). Some of those fs assign the
simple_statfs() method directly in their ->s_op struct and some assign it
indirectly via a call to simple_fill_super() or to pseudo_fs_fill_super()
with either custom or "simple" s_op.
We also make the same change to efivarfs and hugetlbfs, although they do
not use simple_statfs(), because they use the simple_* inode opreations
(e.g. simple_lookup()).

(**) For most of the "simple" filesystems, the ->getattr() method is not
assigned, so stat() is implemented by generic_fillattr().  A few "simple"
filesystem use the simple_getattr() method which also calls
generic_fillattr() to fill most of the stat struct.

The two exceptions are procfs and 9p. procfs implements several different
->getattr() methods, but they all end up calling generic_fillattr() to
fill the st_dev field from sb->s_dev.

9p has more complicated ->getattr() methods, but they too, end up calling
generic_fillattr() to fill the st_dev field from sb->s_dev.

Note that 9p and kernfs also call simple_statfs() from custom ->statfs()
methods which already fill the f_fsid field, but v9fs_statfs() calls
simple_statfs() only in case f_fsid was not filled and kenrfs_statfs()
overwrites f_fsid after calling simple_statfs().

Link: https://lore.kernel.org/r/20230919094820.g5bwharbmy2dq46w@quack3/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231023143049.2944970-1-amir73il@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>

Allow UEFI variables to be modified by non-root processes in order to
run sandboxed code. This doesn't change the behavior of mounting
efivarfs unless uid/gid are specified; by default both are set to root.

Signed-off-by: Jiao Zhou <jiaozhou@google.com>
Acked-by: Matthew Garrett <mgarrett@aurora.tech>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Some firmware (notably U-Boot) provides GetVariable() and
GetNextVariableName() but not QueryVariableInfo().

With commit d86ff3333cb1 ("efivarfs: expose used and total size") the
statfs syscall was broken for such firmware.

If QueryVariableInfo() does not exist or returns EFI_UNSUPPORTED, just
report the file system size as 0 as statfs_simple() previously did.

Fixes: d86ff3333cb1 ("efivarfs: expose used and total size")
Link: https://lore.kernel.org/all/20230910045445.41632-1-heinrich.schuchardt@canonical.com/
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
[ardb: log warning on QueryVariableInfo() failure]
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

When writing EFI variables, one might get errors with no other message
on why it fails. Being able to see how much is used by EFI variables
helps analyzing such issues.

Since this is not a conventional filesystem, block size is intentionally
set to 1 instead of PAGE_SIZE.

x86 quirks of reserved size are taken into account; so that available
and free size can be different, further helping debugging space issues.

With this patch, one can see the remaining space in EFI variable storage
via efivarfs, like this:

   $ df -h /sys/firmware/efi/efivars/
   Filesystem      Size  Used Avail Use% Mounted on
   efivarfs        176K  106K   66K  62% /sys/firmware/efi/efivars

Signed-off-by: Anisse Astier <an.astier@criteo.com>
[ardb: - rename efi_reserved_space() to efivar_reserved_space()
       - whitespace/coding style tweaks]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

The efivar ops are typically registered at subsys init time so that
they are available when efivarfs is registered at module init time.

Other efivars implementations, such as Google SMI, exist and can
currently be built as modules which means that efivar may not be
available when efivarfs is initialised.

Move the efivar availability check from module init to when the
filesystem is mounted to allow late registration of efivars.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Since commit 0f5b2c69a4cb ("efi: vars: Remove deprecated 'efivars' sysfs
interface") and the removal of the sysfs interface there are no users of
the efivars kobject.

Drop the kobject argument from efivars_register() and add a new
efivar_is_available() helper in favour of the old efivars_kobject().

Note that the new helper uses the prefix 'efivar' (i.e. without an 's')
for consistency with efivar_supports_writes() and the rest of the
interface (except the registration functions).

For the benefit of drivers with optional EFI support, also provide a
dummy implementation of efivar_is_available().

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

In anticipation of putting random seeds in EFI variables, it's important
that the random GUID namespace of variables remains hidden from
userspace. We accomplish this by not populating efivarfs with entries
from that GUID, as well as denying the creation of new ones in that
GUID.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Both efivars and efivarfs uses __efivar_entry_iter() to go over the
linked list that shadows the list of EFI variables held by the firmware,
but fail to call the begin/end helpers that are documented as a
prerequisite.

So switch to the proper version, which is efivar_entry_iter(). Given
that in both cases, efivar_entry_remove() is invoked with the lock held
already, don't take the lock there anymore.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>