commit d7dab39b6e16d5eea78ed3c705d2a2d0772b4f06 upstream.

This is based on commit d1f5273e9adb40724a85272f248f210dc4ce919a
ext4: return 32/64-bit dir name hash according to usage type
by Fan Yong <yong.fan@whamcloud.com>

Traditionally ext2/3/4 has returned a 32-bit hash value from llseek()
to appease NFSv2, which can only handle a 32-bit cookie for seekdir()
and telldir().  However, this causes problems if there are 32-bit hash
collisions, since the NFSv2 server can get stuck resending the same
entries from the directory repeatedly.

Allow ext3 to return a full 64-bit hash (both major and minor) for
telldir to decrease the chance of hash collisions.

This patch does implement a new ext3_dir_llseek op, because with 64-bit
hashes, nfs will attempt to seek to a hash "offset" which is much
larger than ext3's s_maxbytes.  So for dx dirs, we call
generic_file_llseek_size() with the appropriate max hash value as the
maximum seekable size.  Otherwise we just pass through to
generic_file_llseek().

Patch-updated-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de>
Patch-updated-by: Eric Sandeen <sandeen@redhat.com>
(blame us if something is not correct)

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 64cb927371cd2ec43758d8a094a003d27bc3d0dc upstream.

Both ext3 and ext4 htree_dirblock_to_tree() is just filling the
in-core rbtree for use by call_filldir().  All updates of ->f_pos are
done by the latter; bumping it here (on error) is obviously wrong - we
might very well have it nowhere near the block we'd found an error in.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 8d0c2d10dd72c5292eda7a06231056a4c972e4cc upstream.

ext3_msg() takes the printk prefix as the second parameter and the
format string as the third parameter. Two callers of ext3_msg omit the
prefix and pass the format string as the second parameter and the first
parameter to the format string as the third parameter. In both cases
this string comes from an arbitrary source. Which means the string may
contain format string characters, which will
lead to undefined and potentially harmful behavior.

The issue was introduced in commit 4cf46b67eb("ext3: Unify log messages
in ext3") and is fixed by this patch.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 156bddd8e505b295540f3ca0e27dda68cb0d49aa upstream.

Code tracking when transaction needs to be committed on fdatasync(2) forgets
to handle a situation when only inode's i_size is changed. Thus in such
situations fdatasync(2) doesn't force transaction with new i_size to disk
and that can result in wrong i_size after a crash.

Fix the issue by updating inode's i_datasync_tid whenever its size is
updated.

Reported-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Signed-off-by: Jan Kara <jack@suse.cz>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 1415dd8705394399d59a3df1ab48d149e1e41e77 upstream.

When insert_inode_locked() fails in ext3_new_inode() it most likely
means inode bitmap got corrupted and we allocated again inode which
is already in use. Also doing unlock_new_inode() during error recovery
is wrong since inode does not have I_NEW set. Fix the problem by jumping
to fail: (instead of fail_drop:) which declares filesystem error and
does not call unlock_new_inode().

Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 33c104d415e92a51aaf638dc3d93920cfa601e5c upstream.

WARN_ON_ONCE(IS_RDONLY(inode)) tends to trip when filesystem hits error and is
remounted read-only. This unnecessarily scares users (well, they should be
scared because of filesystem error, but the stack trace distracts them from the
right source of their fear ;-). We could as well just remove the WARN_ON but
it's not hard to fix it to not trip on filesystem with errors and not use more
cycles in the common case so that's what we do.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/hch/vfs-queue:
  vfs: add d_prune dentry operation
  vfs: protect i_nlink
  filesystems: add set_nlink()
  filesystems: add missing nlink wrappers
  logfs: remove unnecessary nlink setting
  ocfs2: remove unnecessary nlink setting
  jfs: remove unnecessary nlink setting
  hypfs: remove unnecessary nlink setting
  vfs: ignore error on forced remount
  readlinkat: ensure we return ENOENT for the empty pathname for normal lookups
  vfs: fix dentry leak in simple_fill_super()

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Cleanup metadata flags handling
  udf: Skip mirror metadata FE loading when metadata FE is ok
  ext3: Allow quota file use root reservation
  udf: Remove web reference from UDF MAINTAINERS entry
  quota: Drop path reference on error exit from quotactl
  udf: Neaten udf_debug uses
  udf: Neaten logging output, use vsprintf extension %pV
  udf: Convert printks to pr_<level>
  udf: Rename udf_warning to udf_warn
  udf: Rename udf_error to udf_err
  udf: Promote some debugging messages to udf_error
  ext3: Remove the obsolete broken EXT3_IOC32_WAIT_FOR_READONLY.
  udf: Add readpages support for udf.
  ext3/balloc.c: local functions should be static
  ext2: fix the outdated comment in ext2_nfs_get_inode()
  ext3: remove deprecated oldalloc
  fs/ext3/balloc.c: delete useless initialization
  fs/ext2/balloc.c: delete useless initialization
  ext3: fix message in ext3_remount for rw-remount case
  ext3: Remove i_mutex from ext3_sync_file()

Fix up trivial (printf format cleanup) conflicts in fs/udf/udfdecl.h

Replace remaining direct i_nlink updates with a new set_nlink()
updater function.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Tested-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Replace direct i_nlink updates with the respective updater function
(inc_nlink, drop_nlink, clear_nlink, inode_dec_link_count).

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>