linux-toradex.git/fs/fs-writeback.c, branch v3.12.14

writeback: Fix data corruption on NFS

2014-01-25T16:49:28+00:00

commit f9b0e058cbd04ada76b13afffa7e1df830543c24 upstream.

Commit 4f8ad655dbc8 "writeback: Refactor writeback_single_inode()" added
a condition to skip clean inode. However this is wrong in WB_SYNC_ALL
mode because there we also want to wait for outstanding writeback on
possibly clean inode. This was causing occasional data corruption issues
on NFS because it uses sync_inode() to make sure all outstanding writes
are flushed to the server before truncating the inode and with
sync_inode() returning prematurely file was sometimes extended back
by an outstanding write after it was truncated.

So modify the test to also check for pages under writeback in
WB_SYNC_ALL mode.

Fixes: 4f8ad655dbc82cf05d2edc11e66b78a42d38bf93
Reported-and-tested-by: Dan Duval 
Signed-off-by: Jan Kara 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'writeback-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux

2013-09-14T03:06:40+00:00

Pull writeback fix from Wu Fengguang:
 "A trivial writeback fix"

* tag 'writeback-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
  writeback: Do not sort b_io list only because of block device inode

writeback: fix race that cause writeback hung

2013-09-11T22:58:13+00:00

There is a race between mark inode dirty and writeback thread, see the
following scenario.  In this case, writeback thread will not run though
there is dirty_io.

__mark_inode_dirty()                                          bdi_writeback_workfn()
	...                                                       	...
	spin_lock(&inode->i_lock);
	...
	if (bdi_cap_writeback_dirty(bdi)) {
	    <<< assume wb has dirty_io, so wakeup_bdi is false.
	    <<< the following inode_dirty also have wakeup_bdi false.
	    if (!wb_has_dirty_io(&bdi->wb))
		    wakeup_bdi = true;
	}
	spin_unlock(&inode->i_lock);
	                                                            <<< assume last dirty_io is removed here.
	                                                            pages_written = wb_do_writeback(wb);
	                                                            ...
	                                                            <<< work_list empty and wb has no dirty_io,
	                                                            <<< delayed_work will not be queued.
	                                                            if (!list_empty(&bdi->work_list) ||
	                                                                (wb_has_dirty_io(wb) && dirty_writeback_interval))
	                                                                queue_delayed_work(bdi_wq, &wb->dwork,
	                                                                    msecs_to_jiffies(dirty_writeback_interval * 10));
	spin_lock(&bdi->wb.list_lock);
	inode->dirtied_when = jiffies;
	<<< new dirty_io is added.
	list_move(&inode->i_wb_list, &bdi->wb.b_dirty);
	spin_unlock(&bdi->wb.list_lock);

	<<< though there is dirty_io, but wakeup_bdi is false,
	<<< so writeback thread will not be waked up and
	<<< the new dirty_io will not be flushed.
	if (wakeup_bdi)
	    bdi_wakeup_thread_delayed(bdi);

Writeback will run until there is a new flush work queued.  This may cause
a lot of dirty pages stay in memory for a long time.

Signed-off-by: Junxiao Bi 
Reviewed-by: Jan Kara 
Cc: Fengguang Wu 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm/writeback: make writeback_inodes_wb static

2013-09-11T22:58:02+00:00

It's not used globally and could be static.

Signed-off-by: Wanpeng Li 
Cc: Dave Hansen 
Cc: Rik van Riel 
Cc: Fengguang Wu 
Cc: Joonsoo Kim 
Cc: Johannes Weiner 
Cc: Tejun Heo 
Cc: Yasuaki Ishimatsu 
Cc: David Rientjes 
Cc: KOSAKI Motohiro 
Cc: Jiri Kosina 
Cc: Wanpeng Li 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

writeback: fix occasional slow sync(1)

2013-09-11T22:57:55+00:00

In case when system contains no dirty pages, wakeup_flusher_threads() will
submit WB_SYNC_NONE writeback for 0 pages so wb_writeback() exits
immediately without doing anything, even though there are dirty inodes in
the system.  Thus sync(1) will write all the dirty inodes from a
WB_SYNC_ALL writeback pass which is slow.

Fix the problem by using get_nr_dirty_pages() in wakeup_flusher_threads()
instead of calculating number of dirty pages manually.  That function also
takes number of dirty inodes into account.

Signed-off-by: Jan Kara 
Reported-by: Paul Taysom 
Cc: Wu Fengguang 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm/writeback: don't check force_wait to handle bdi->work_list

2013-07-09T17:33:22+00:00

After commit 839a8e8660b6 ("writeback: replace custom worker pool
implementation with unbound workqueue"), bdi_writeback_workfn runs off
bdi_writeback->dwork, on each execution, it processes bdi->work_list and
reschedules if there are more things to do instead of flush any work
that race with us existing.  It is unecessary to check force_wait in
wb_do_writeback since it is always 0 after the mentioned commit.  This
patch remove the force_wait in wb_do_writeback.

Signed-off-by: Wanpeng Li 
Reviewed-by: Tejun Heo 
Reviewed-by: Fengguang Wu 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

fs/fs-writeback.c: : make wb_do_writeback() as static

2013-07-09T17:33:22+00:00

It's not used globally and could be static.

Signed-off-by: Haicheng Li 
Cc: Jan Kara 
Cc: Wu Fengguang 
Cc: Kirill A. Shutemov 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

writeback: Do not sort b_io list only because of block device inode

2013-07-09T14:36:45+00:00

It is very likely that block device inode will be part of BDI dirty list
as well. However it doesn't make sence to sort inodes on the b_io list
just because of this inode (as it contains buffers all over the device
anyway). So save some CPU cycles which is valuable since we hold relatively
contented wb->list_lock.

Signed-off-by: Jan Kara

sync: don't block the flusher thread waiting on IO

2013-07-02T16:16:42+00:00

When sync does it's WB_SYNC_ALL writeback, it issues data Io and
then immediately waits for IO completion. This is done in the
context of the flusher thread, and hence completely ties up the
flusher thread for the backing device until all the dirty inodes
have been synced. On filesystems that are dirtying inodes constantly
and quickly, this means the flusher thread can be tied up for
minutes per sync call and hence badly affect system level write IO
performance as the page cache cannot be cleaned quickly.

We already have a wait loop for IO completion for sync(2), so cut
this out of the flusher thread and delegate it to wait_sb_inodes().
Hence we can do rapid IO submission, and then wait for it all to
complete.

Effect of sync on fsmark before the patch:

FSUse%        Count         Size    Files/sec     App Overhead
.....
     0       640000         4096      35154.6          1026984
     0       720000         4096      36740.3          1023844
     0       800000         4096      36184.6           916599
     0       880000         4096       1282.7          1054367
     0       960000         4096       3951.3           918773
     0      1040000         4096      40646.2           996448
     0      1120000         4096      43610.1           895647
     0      1200000         4096      40333.1           921048

And a single sync pass took:

  real    0m52.407s
  user    0m0.000s
  sys     0m0.090s

After the patch, there is no impact on fsmark results, and each
individual sync(2) operation run concurrently with the same fsmark
workload takes roughly 7s:

  real    0m6.930s
  user    0m0.000s
  sys     0m0.039s

IOWs, sync is 7-8x faster on a busy filesystem and does not have an
adverse impact on ongoing async data write operations.

Signed-off-by: Dave Chinner 
Reviewed-by: Jan Kara 
Signed-off-by: Linus Torvalds

Merge branch 'for-3.10/core' of git://git.kernel.dk/linux-block

2013-05-08T17:13:35+00:00

Pull block core updates from Jens Axboe:

 - Major bit is Kents prep work for immutable bio vecs.

 - Stable candidate fix for a scheduling-while-atomic in the queue
   bypass operation.

 - Fix for the hang on exceeded rq->datalen 32-bit unsigned when merging
   discard bios.

 - Tejuns changes to convert the writeback thread pool to the generic
   workqueue mechanism.

 - Runtime PM framework, SCSI patches exists on top of these in James'
   tree.

 - A few random fixes.

* 'for-3.10/core' of git://git.kernel.dk/linux-block: (40 commits)
  relay: move remove_buf_file inside relay_close_buf
  partitions/efi.c: replace useless kzalloc's by kmalloc's
  fs/block_dev.c: fix iov_shorten() criteria in blkdev_aio_read()
  block: fix max discard sectors limit
  blkcg: fix "scheduling while atomic" in blk_queue_bypass_start
  Documentation: cfq-iosched: update documentation help for cfq tunables
  writeback: expose the bdi_wq workqueue
  writeback: replace custom worker pool implementation with unbound workqueue
  writeback: remove unused bdi_pending_list
  aoe: Fix unitialized var usage
  bio-integrity: Add explicit field for owner of bip_buf
  block: Add an explicit bio flag for bios that own their bvec
  block: Add bio_alloc_pages()
  block: Convert some code to bio_for_each_segment_all()
  block: Add bio_for_each_segment_all()
  bounce: Refactor __blk_queue_bounce to not use bi_io_vec
  raid1: use bio_copy_data()
  pktcdvd: Use bio_reset() in disabled code to kill bi_idx usage
  pktcdvd: use bio_copy_data()
  block: Add bio_copy_data()
  ...