linux-toradex.git/fs/fscache, branch v3.2.73

fs/fscache/stats.c: fix memory leak

2013-05-13T14:02:28+00:00

commit ec686c9239b4d472052a271c505d04dae84214cc upstream.

There is a kernel memory leak observed when the proc file
/proc/fs/fscache/stats is read.

The reason is that in fscache_stats_open, single_open is called and the
respective release function is not called during release.  Hence fix
with correct release function - single_release().

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=57101

Signed-off-by: Anurup m 
Cc: shyju pv 
Cc: Sanil kumar 
Cc: Nataraj m 
Cc: Li Zefan 
Cc: David Howells 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Ben Hutchings

FS-Cache: Fix __fscache_uncache_all_inode_pages()'s outer loop

2011-07-21T17:59:16+00:00

The compiler, at least for ix86 and m68k, validly warns that the
comparison:

	next <= (loff_t)-1

is always true (and it's always true also for x86-64 and probably all
other arches - as long as pgoff_t isn't wider than loff_t).  The
intention appears to be to avoid wrapping of "next", so rather than
eliminating the pointless comparison, fix the loop to indeed get exited
when "next" would otherwise wrap.

On m68k the following warning is observed:

  fs/fscache/page.c: In function '__fscache_uncache_all_inode_pages':
  fs/fscache/page.c:979: warning: comparison is always false due to limited range of data type

Reported-by: Geert Uytterhoeven 
Reported-by: Jan Beulich 
Signed-off-by: Jan Beulich 
Signed-off-by: David Howells 
Cc: Suresh Jayaraman 
Cc: Geert Uytterhoeven 
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds

FS-Cache: Add a helper to bulk uncache pages on an inode

2011-07-07T20:21:56+00:00

Add an FS-Cache helper to bulk uncache pages on an inode.  This will
only work for the circumstance where the pages in the cache correspond
1:1 with the pages attached to an inode's page cache.

This is required for CIFS and NFS: When disabling inode cookie, we were
returning the cookie and setting cifsi->fscache to NULL but failed to
invalidate any previously mapped pages.  This resulted in "Bad page
state" errors and manifested in other kind of errors when running
fsstress.  Fix it by uncaching mapped pages when we disable the inode
cookie.

This patch should fix the following oops and "Bad page state" errors
seen during fsstress testing.

  ------------[ cut here ]------------
  kernel BUG at fs/cachefiles/namei.c:201!
  invalid opcode: 0000 [#1] SMP
  Pid: 5, comm: kworker/u:0 Not tainted 2.6.38.7-30.fc15.x86_64 #1 Bochs Bochs
  RIP: 0010: cachefiles_walk_to_object+0x436/0x745 [cachefiles]
  RSP: 0018:ffff88002ce6dd00  EFLAGS: 00010282
  RAX: ffff88002ef165f0 RBX: ffff88001811f500 RCX: 0000000000000000
  RDX: 0000000000000000 RSI: 0000000000000100 RDI: 0000000000000282
  RBP: ffff88002ce6dda0 R08: 0000000000000100 R09: ffffffff81b3a300
  R10: 0000ffff00066c0a R11: 0000000000000003 R12: ffff88002ae54840
  R13: ffff88002ae54840 R14: ffff880029c29c00 R15: ffff88001811f4b0
  FS:  00007f394dd32720(0000) GS:ffff88002ef00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: 00007fffcb62ddf8 CR3: 000000001825f000 CR4: 00000000000006e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Process kworker/u:0 (pid: 5, threadinfo ffff88002ce6c000, task ffff88002ce55cc0)
  Stack:
   0000000000000246 ffff88002ce55cc0 ffff88002ce6dd58 ffff88001815dc00
   ffff8800185246c0 ffff88001811f618 ffff880029c29d18 ffff88001811f380
   ffff88002ce6dd50 ffffffff814757e4 ffff88002ce6dda0 ffffffff8106ac56
  Call Trace:
   cachefiles_lookup_object+0x78/0xd4 [cachefiles]
   fscache_lookup_object+0x131/0x16d [fscache]
   fscache_object_work_func+0x1bc/0x669 [fscache]
   process_one_work+0x186/0x298
   worker_thread+0xda/0x15d
   kthread+0x84/0x8c
   kernel_thread_helper+0x4/0x10
  RIP  cachefiles_walk_to_object+0x436/0x745 [cachefiles]
  ---[ end trace 1d481c9af1804caa ]---

I tested the uncaching by the following means:

 (1) Create a big file on my NFS server (104857600 bytes).

 (2) Read the file into the cache with md5sum on the NFS client.  Look in
     /proc/fs/fscache/stats:

	Pages  : mrk=25601 unc=0

 (3) Open the file for read/write ("bash 5<>/warthog/bigfile").  Look in proc
     again:

	Pages  : mrk=25601 unc=25601

Reported-by: Jeff Layton 
Signed-off-by: David Howells 
Reviewed-and-Tested-by: Suresh Jayaraman 
cc: stable@kernel.org
Signed-off-by: Linus Torvalds

fscache: remove dead code under CONFIG_WORKQUEUE_DEBUGFS

2011-05-25T15:39:44+00:00

There is no CONFIG_WORKQUEUE_DEBUGFS any more, so this code is dead.

Signed-off-by: WANG Cong 
Cc: David Howells 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

FS-Cache: Fix operation handling

2011-01-14T17:23:36+00:00

fscache_submit_exclusive_op() adds an operation to the pending list if
other operations are pending.  Fix the check for pending ops as n_ops
must be greater than 0 at the point it is checked as it is incremented
immediately before under lock.

Signed-off-by: Akshat Aranya 
Signed-off-by: David Howells 
Signed-off-by: Linus Torvalds

Add a dummy printk function for the maintenance of unused printks

2010-08-12T16:51:35+00:00

Add a dummy printk function for the maintenance of unused printks through gcc
format checking, and also so that side-effect checking is maintained too.

Signed-off-by: David Howells 
Signed-off-by: Linus Torvalds

fscache: fix build on !CONFIG_SYSCTL

2010-07-24T09:10:09+00:00

Commit 8b8edefa (fscache: convert object to use workqueue instead of
slow-work) made fscache_exit() call unregister_sysctl_table()
unconditionally breaking build when sysctl is disabled.  Fix it by
putting it inside CONFIG_SYSCTL.

Signed-off-by: Tejun Heo 
Reported-by: Randy Dunlap 
Cc: David Howells

fscache: drop references to slow-work

2010-07-22T20:58:58+00:00

fscache no longer uses slow-work.  Drop references to it.

Signed-off-by: Tejun Heo 
Acked-by: David Howells

fscache: convert operation to use workqueue instead of slow-work

2010-07-22T20:58:47+00:00

Make fscache operation to use only workqueue instead of combination of
workqueue and slow-work.  FSCACHE_OP_SLOW is dropped and
FSCACHE_OP_FAST is renamed to FSCACHE_OP_ASYNC and uses newly added
fscache_op_wq workqueue to execute op->processor().
fscache_operation_init_slow() is dropped and fscache_operation_init()
now takes @processor argument directly.

* Unbound workqueue is used.

* fscache_retrieval_work() is no longer necessary as OP_ASYNC now does
  the equivalent thing.

* sysctl fscache.operation_max_active added to control concurrency.
  The default value is nr_cpus clamped between 2 and
  WQ_UNBOUND_MAX_ACTIVE.

* debugfs support is dropped for now.  Tracing API based debug
  facility is planned to be added.

Signed-off-by: Tejun Heo 
Acked-by: David Howells

fscache: convert object to use workqueue instead of slow-work

2010-07-22T20:58:34+00:00

Make fscache object state transition callbacks use workqueue instead
of slow-work.  New dedicated unbound CPU workqueue fscache_object_wq
is created.  get/put callbacks are renamed and modified to take
@object and called directly from the enqueue wrapper and the work
function.  While at it, make all open coded instances of get/put to
use fscache_get/put_object().

* Unbound workqueue is used.

* work_busy() output is printed instead of slow-work flags in object
  debugging outputs.  They mean basically the same thing bit-for-bit.

* sysctl fscache.object_max_active added to control concurrency.  The
  default value is nr_cpus clamped between 4 and
  WQ_UNBOUND_MAX_ACTIVE.

* slow_work_sleep_till_thread_needed() is replaced with fscache
  private implementation fscache_object_sleep_till_congested() which
  waits on fscache_object_wq congestion.

* debugfs support is dropped for now.  Tracing API based debug
  facility is planned to be added.

Signed-off-by: Tejun Heo 
Acked-by: David Howells