<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-toradex.git/fs/fuse, branch v2.6.32.28</title>
<subtitle>Linux kernel for Apalis and Colibri modules</subtitle>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/'/>
<entry>
<title>fuse: fix ioctl when server is 32bit</title>
<updated>2011-01-07T22:43:02+00:00</updated>
<author>
<name>Miklos Szeredi</name>
<email>mszeredi@suse.cz</email>
</author>
<published>2010-11-30T15:39:27+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=9f68de59cbe6e5458d0b755ed0fc945fddfbc042'/>
<id>9f68de59cbe6e5458d0b755ed0fc945fddfbc042</id>
<content type='text'>
commit d9d318d39dd5cb686660504a3565aac453709ccc upstream.

If a 32bit CUSE server is run on 64bit this results in EIO being
returned to the caller.

The reason is that FUSE_IOCTL_RETRY reply was defined to use 'struct
iovec', which is different on 32bit and 64bit archs.

Work around this by looking at the size of the reply to determine
which struct was used.  This is only needed if CONFIG_COMPAT is
defined.

A more permanent fix for the interface will be to use the same struct
on both 32bit and 64bit.

Reported-by: "ccmail111" &lt;ccmail111@yahoo.com&gt;
Signed-off-by: Miklos Szeredi &lt;mszeredi@suse.cz&gt;
CC: Tejun Heo &lt;tj@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@suse.de&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit d9d318d39dd5cb686660504a3565aac453709ccc upstream.

If a 32bit CUSE server is run on 64bit this results in EIO being
returned to the caller.

The reason is that FUSE_IOCTL_RETRY reply was defined to use 'struct
iovec', which is different on 32bit and 64bit archs.

Work around this by looking at the size of the reply to determine
which struct was used.  This is only needed if CONFIG_COMPAT is
defined.

A more permanent fix for the interface will be to use the same struct
on both 32bit and 64bit.

Reported-by: "ccmail111" &lt;ccmail111@yahoo.com&gt;
Signed-off-by: Miklos Szeredi &lt;mszeredi@suse.cz&gt;
CC: Tejun Heo &lt;tj@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@suse.de&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>fuse: verify ioctl retries</title>
<updated>2011-01-07T22:43:02+00:00</updated>
<author>
<name>Miklos Szeredi</name>
<email>mszeredi@suse.cz</email>
</author>
<published>2010-11-30T15:39:27+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=326aa6201f5e61711e75979dc5022487a88fe548'/>
<id>326aa6201f5e61711e75979dc5022487a88fe548</id>
<content type='text'>
commit 7572777eef78ebdee1ecb7c258c0ef94d35bad16 upstream.

Verify that the total length of the iovec returned in FUSE_IOCTL_RETRY
doesn't overflow iov_length().

Signed-off-by: Miklos Szeredi &lt;mszeredi@suse.cz&gt;
CC: Tejun Heo &lt;tj@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@suse.de&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 7572777eef78ebdee1ecb7c258c0ef94d35bad16 upstream.

Verify that the total length of the iovec returned in FUSE_IOCTL_RETRY
doesn't overflow iov_length().

Signed-off-by: Miklos Szeredi &lt;mszeredi@suse.cz&gt;
CC: Tejun Heo &lt;tj@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@suse.de&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>fuse: fix attributes after open(O_TRUNC)</title>
<updated>2010-12-09T21:27:00+00:00</updated>
<author>
<name>Ken Sumrall</name>
<email>ksumrall@android.com</email>
</author>
<published>2010-11-24T20:57:00+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=ca20422682e1da682252203cd65c714a97358363'/>
<id>ca20422682e1da682252203cd65c714a97358363</id>
<content type='text'>
commit a0822c55779d9319939eac69f00bb729ea9d23da upstream.

The attribute cache for a file was not being cleared when a file is opened
with O_TRUNC.

If the filesystem's open operation truncates the file ("atomic_o_trunc"
feature flag is set) then the kernel should invalidate the cached st_mtime
and st_ctime attributes.

Also i_size should be explicitly be set to zero as it is used sometimes
without refreshing the cache.

Signed-off-by: Ken Sumrall &lt;ksumrall@android.com&gt;
Cc: Anfei &lt;anfei.zhou@gmail.com&gt;
Cc: "Anand V. Avati" &lt;avati@gluster.com&gt;
Signed-off-by: Miklos Szeredi &lt;miklos@szeredi.hu&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@suse.de&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit a0822c55779d9319939eac69f00bb729ea9d23da upstream.

The attribute cache for a file was not being cleared when a file is opened
with O_TRUNC.

If the filesystem's open operation truncates the file ("atomic_o_trunc"
feature flag is set) then the kernel should invalidate the cached st_mtime
and st_ctime attributes.

Also i_size should be explicitly be set to zero as it is used sometimes
without refreshing the cache.

Signed-off-by: Ken Sumrall &lt;ksumrall@android.com&gt;
Cc: Anfei &lt;anfei.zhou@gmail.com&gt;
Cc: "Anand V. Avati" &lt;avati@gluster.com&gt;
Signed-off-by: Miklos Szeredi &lt;miklos@szeredi.hu&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@suse.de&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>fuse: flush background queue on connection close</title>
<updated>2010-09-20T20:17:46+00:00</updated>
<author>
<name>Miklos Szeredi</name>
<email>mszeredi@suse.cz</email>
</author>
<published>2010-09-07T11:42:41+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=eeea0346fcb0846d1bfe42e3c87486ab0d26e950'/>
<id>eeea0346fcb0846d1bfe42e3c87486ab0d26e950</id>
<content type='text'>
commit 595afaf9e6ee1b48e13ec4b8bcc8c7dee888161a upstream.

David Bartly reported that fuse can hang in fuse_get_req_nofail() when
the connection to the filesystem server is no longer active.

If bg_queue is not empty then flush_bg_queue() called from
request_end() can put more requests on to the pending queue.  If this
happens while ending requests on the processing queue then those
background requests will be queued to the pending list and never
ended.

Another problem is that fuse_dev_release() didn't wake up processes
sleeping on blocked_waitq.

Solve this by:

 a) flushing the background queue before calling end_requests() on the
    pending and processing queues

 b) setting blocked = 0 and waking up processes waiting on
    blocked_waitq()

Thanks to David for an excellent bug report.

Reported-by: David Bartley &lt;andareed@gmail.com&gt;
Signed-off-by: Miklos Szeredi &lt;mszeredi@suse.cz&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@suse.de&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 595afaf9e6ee1b48e13ec4b8bcc8c7dee888161a upstream.

David Bartly reported that fuse can hang in fuse_get_req_nofail() when
the connection to the filesystem server is no longer active.

If bg_queue is not empty then flush_bg_queue() called from
request_end() can put more requests on to the pending queue.  If this
happens while ending requests on the processing queue then those
background requests will be queued to the pending list and never
ended.

Another problem is that fuse_dev_release() didn't wake up processes
sleeping on blocked_waitq.

Solve this by:

 a) flushing the background queue before calling end_requests() on the
    pending and processing queues

 b) setting blocked = 0 and waking up processes waiting on
    blocked_waitq()

Thanks to David for an excellent bug report.

Reported-by: David Bartley &lt;andareed@gmail.com&gt;
Signed-off-by: Miklos Szeredi &lt;mszeredi@suse.cz&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@suse.de&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>mm: flush dcache before writing into page to avoid alias</title>
<updated>2010-02-09T12:50:59+00:00</updated>
<author>
<name>anfei zhou</name>
<email>anfei.zhou@gmail.com</email>
</author>
<published>2010-02-02T21:44:02+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=3a9353f232812dc9057cbee39c618f400a8c5f60'/>
<id>3a9353f232812dc9057cbee39c618f400a8c5f60</id>
<content type='text'>
commit 931e80e4b3263db75c8e34f078d22f11bbabd3a3 upstream.

The cache alias problem will happen if the changes of user shared mapping
is not flushed before copying, then user and kernel mapping may be mapped
into two different cache line, it is impossible to guarantee the coherence
after iov_iter_copy_from_user_atomic.  So the right steps should be:

	flush_dcache_page(page);
	kmap_atomic(page);
	write to page;
	kunmap_atomic(page);
	flush_dcache_page(page);

More precisely, we might create two new APIs flush_dcache_user_page and
flush_dcache_kern_page to replace the two flush_dcache_page accordingly.

Here is a snippet tested on omap2430 with VIPT cache, and I think it is
not ARM-specific:

	int val = 0x11111111;
	fd = open("abc", O_RDWR);
	addr = mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
	*(addr+0) = 0x44444444;
	tmp = *(addr+0);
	*(addr+1) = 0x77777777;
	write(fd, &amp;val, sizeof(int));
	close(fd);

The results are not always 0x11111111 0x77777777 at the beginning as expected.  Sometimes we see 0x44444444 0x77777777.

Signed-off-by: Anfei &lt;anfei.zhou@gmail.com&gt;
Cc: Russell King &lt;rmk@arm.linux.org.uk&gt;
Cc: Miklos Szeredi &lt;miklos@szeredi.hu&gt;
Cc: Nick Piggin &lt;nickpiggin@yahoo.com.au&gt;
Cc: &lt;linux-arch@vger.kernel.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@suse.de&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 931e80e4b3263db75c8e34f078d22f11bbabd3a3 upstream.

The cache alias problem will happen if the changes of user shared mapping
is not flushed before copying, then user and kernel mapping may be mapped
into two different cache line, it is impossible to guarantee the coherence
after iov_iter_copy_from_user_atomic.  So the right steps should be:

	flush_dcache_page(page);
	kmap_atomic(page);
	write to page;
	kunmap_atomic(page);
	flush_dcache_page(page);

More precisely, we might create two new APIs flush_dcache_user_page and
flush_dcache_kern_page to replace the two flush_dcache_page accordingly.

Here is a snippet tested on omap2430 with VIPT cache, and I think it is
not ARM-specific:

	int val = 0x11111111;
	fd = open("abc", O_RDWR);
	addr = mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
	*(addr+0) = 0x44444444;
	tmp = *(addr+0);
	*(addr+1) = 0x77777777;
	write(fd, &amp;val, sizeof(int));
	close(fd);

The results are not always 0x11111111 0x77777777 at the beginning as expected.  Sometimes we see 0x44444444 0x77777777.

Signed-off-by: Anfei &lt;anfei.zhou@gmail.com&gt;
Cc: Russell King &lt;rmk@arm.linux.org.uk&gt;
Cc: Miklos Szeredi &lt;miklos@szeredi.hu&gt;
Cc: Nick Piggin &lt;nickpiggin@yahoo.com.au&gt;
Cc: &lt;linux-arch@vger.kernel.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@suse.de&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>fuse: reject O_DIRECT flag also in fuse_create</title>
<updated>2009-11-27T15:37:13+00:00</updated>
<author>
<name>Csaba Henk</name>
<email>csaba@gluster.com</email>
</author>
<published>2009-11-27T14:00:14+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=1b7323965a8c6eee9dc4e345a7ae4bff1dc93149'/>
<id>1b7323965a8c6eee9dc4e345a7ae4bff1dc93149</id>
<content type='text'>
The comment in fuse_open about O_DIRECT:

  "VFS checks this, but only _after_ -&gt;open()"

also holds for fuse_create, however, the same kind of check was missing there.

As an impact of this bug, open(newfile, O_RDWR|O_CREAT|O_DIRECT) fails, but a
stub newfile will remain if the fuse server handled the implied FUSE_CREATE
request appropriately.

Other impact: in the above situation ima_file_free() will complain to open/free
imbalance if CONFIG_IMA is set.

Signed-off-by: Csaba Henk &lt;csaba@gluster.com&gt;
Signed-off-by: Miklos Szeredi &lt;mszeredi@suse.cz&gt;
Cc: Harshavardhana &lt;harsha@gluster.com&gt;
Cc: stable@kernel.org
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The comment in fuse_open about O_DIRECT:

  "VFS checks this, but only _after_ -&gt;open()"

also holds for fuse_create, however, the same kind of check was missing there.

As an impact of this bug, open(newfile, O_RDWR|O_CREAT|O_DIRECT) fails, but a
stub newfile will remain if the fuse server handled the implied FUSE_CREATE
request appropriately.

Other impact: in the above situation ima_file_free() will complain to open/free
imbalance if CONFIG_IMA is set.

Signed-off-by: Csaba Henk &lt;csaba@gluster.com&gt;
Signed-off-by: Miklos Szeredi &lt;mszeredi@suse.cz&gt;
Cc: Harshavardhana &lt;harsha@gluster.com&gt;
Cc: stable@kernel.org
</pre>
</div>
</content>
</entry>
<entry>
<title>fuse: invalidate target of rename</title>
<updated>2009-11-04T09:24:52+00:00</updated>
<author>
<name>Miklos Szeredi</name>
<email>mszeredi@suse.cz</email>
</author>
<published>2009-11-04T09:24:52+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=5219f346b0ea2a2a8821f1e966b190788c285b0b'/>
<id>5219f346b0ea2a2a8821f1e966b190788c285b0b</id>
<content type='text'>
Invalidate the target's attributes, which may have changed (such as
nlink, change time) so that they are refreshed on the next getattr().

Signed-off-by: Miklos Szeredi &lt;mszeredi@suse.cz&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Invalidate the target's attributes, which may have changed (such as
nlink, change time) so that they are refreshed on the next getattr().

Signed-off-by: Miklos Szeredi &lt;mszeredi@suse.cz&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>fuse: fix kunmap in fuse_ioctl_copy_user</title>
<updated>2009-11-04T09:24:51+00:00</updated>
<author>
<name>Jens Axboe</name>
<email>jens.axboe@oracle.com</email>
</author>
<published>2009-11-03T10:40:44+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=0bd87182d3ab18a32a8e9175d3f68754c58e3432'/>
<id>0bd87182d3ab18a32a8e9175d3f68754c58e3432</id>
<content type='text'>
Looks like another victim of the confusing kmap() vs kmap_atomic() API
differences.

Reported-by: Todor Gyumyushev &lt;yodor1@gmail.com&gt;
Signed-off-by: Jens Axboe &lt;jens.axboe@oracle.com&gt;
Signed-off-by: Miklos Szeredi &lt;mszeredi@suse.cz&gt;
Cc: Tejun Heo &lt;tj@kernel.org&gt;
Cc: stable@kernel.org
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Looks like another victim of the confusing kmap() vs kmap_atomic() API
differences.

Reported-by: Todor Gyumyushev &lt;yodor1@gmail.com&gt;
Signed-off-by: Jens Axboe &lt;jens.axboe@oracle.com&gt;
Signed-off-by: Miklos Szeredi &lt;mszeredi@suse.cz&gt;
Cc: Tejun Heo &lt;tj@kernel.org&gt;
Cc: stable@kernel.org
</pre>
</div>
</content>
</entry>
<entry>
<title>fuse: prevent fuse_put_request on invalid pointer</title>
<updated>2009-11-04T09:24:50+00:00</updated>
<author>
<name>Anand V. Avati</name>
<email>avati@gluster.com</email>
</author>
<published>2009-10-22T13:24:52+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=f60311d5f7670d9539b424e4ed8b5c0872fc9e83'/>
<id>f60311d5f7670d9539b424e4ed8b5c0872fc9e83</id>
<content type='text'>
fuse_direct_io() has a loop where requests are allocated in each
iteration. if allocation fails, the loop is broken out and follows
into an unconditional fuse_put_request() on that invalid pointer.

Signed-off-by: Anand V. Avati &lt;avati@gluster.com&gt;
Signed-off-by: Miklos Szeredi &lt;mszeredi@suse.cz&gt;
Cc: stable@kernel.org
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
fuse_direct_io() has a loop where requests are allocated in each
iteration. if allocation fails, the loop is broken out and follows
into an unconditional fuse_put_request() on that invalid pointer.

Signed-off-by: Anand V. Avati &lt;avati@gluster.com&gt;
Signed-off-by: Miklos Szeredi &lt;mszeredi@suse.cz&gt;
Cc: stable@kernel.org
</pre>
</div>
</content>
</entry>
<entry>
<title>const: mark struct vm_struct_operations</title>
<updated>2009-09-27T18:39:25+00:00</updated>
<author>
<name>Alexey Dobriyan</name>
<email>adobriyan@gmail.com</email>
</author>
<published>2009-09-27T18:29:37+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=f0f37e2f77731b3473fa6bd5ee53255d9a9cdb40'/>
<id>f0f37e2f77731b3473fa6bd5ee53255d9a9cdb40</id>
<content type='text'>
* mark struct vm_area_struct::vm_ops as const
* mark vm_ops in AGP code

But leave TTM code alone, something is fishy there with global vm_ops
being used.

Signed-off-by: Alexey Dobriyan &lt;adobriyan@gmail.com&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
* mark struct vm_area_struct::vm_ops as const
* mark vm_ops in AGP code

But leave TTM code alone, something is fishy there with global vm_ops
being used.

Signed-off-by: Alexey Dobriyan &lt;adobriyan@gmail.com&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
