[ Upstream commit 174d1232ebc84fcde8f5889d1171c9c7e74a10a7 ]

The chunk size of allocations in __gfs2_fallocate is calculated
incorrectly.  The size can collapse, causing __gfs2_fallocate to
allocate one block at a time, which is very inefficient.  This needs
fixing in two places:

In gfs2_quota_lock_check, always set ap->allowed to UINT_MAX to indicate
that there is no quota limit.  This fixes callers that rely on
ap->allowed to be set even when quotas are off.

In __gfs2_fallocate, reset max_blks to UINT_MAX in each iteration of the
loop to make sure that allocation limits from one resource group won't
spill over into another resource group.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit cc555b09d8c3817aeebda43a14ab67049a5653f7 ]

This patch fixes a deadlock caused when the jdata flag is set for
inodes that are already on the ordered write list. Since it is
on the ordered write list, log_flush calls gfs2_ordered_write which
calls filemap_fdatawrite. But since the inode had the jdata flag
set, that calls gfs2_jdata_writepages, which tries to start a new
transaction. A new transaction cannot be started because it tries
to acquire the log_flush rwsem which is already locked by the log
flush operation.

The bottom line is: We cannot switch an inode from ordered to jdata
until we eliminate any ordered data pages (via log flush) or any
log_flush operation afterward will create the circular dependency
above. So we need to flush the log before setting the diskflags to
switch the file mode, then we need to remove the inode from the
ordered writes list.

Before this patch, the log flush was done for jdata->ordered, but
that's wrong. If we're going from jdata to ordered, we don't need
to call gfs2_log_flush because the call to filemap_fdatawrite will
do it for us:

   filemap_fdatawrite() -> __filemap_fdatawrite_range()
      __filemap_fdatawrite_range() -> do_writepages()
         do_writepages() -> gfs2_jdata_writepages()
            gfs2_jdata_writepages() -> gfs2_log_flush()

This patch modifies function do_gfs2_set_flags so that if a file
has its jdata flag set, and it's already on the ordered write list,
the log will be flushed and it will be removed from the list
before setting the flag.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull VFS splice updates from Al Viro:
 "There's a bunch of branches this cycle, both mine and from other folks
  and I'd rather send pull requests separately.

  This one is the conversion of ->splice_read() to ITER_PIPE iov_iter
  (and introduction of such). Gets rid of a lot of code in fs/splice.c
  and elsewhere; there will be followups, but these are for the next
  cycle...  Some pipe/splice-related cleanups from Miklos in the same
  branch as well"

* 'work.splice_read' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  pipe: fix comment in pipe_buf_operations
  pipe: add pipe_buf_steal() helper
  pipe: add pipe_buf_confirm() helper
  pipe: add pipe_buf_release() helper
  pipe: add pipe_buf_get() helper
  relay: simplify relay_file_read()
  switch default_file_splice_read() to use of pipe-backed iov_iter
  switch generic_file_splice_read() to use of ->read_iter()
  new iov_iter flavour: pipe-backed
  fuse_dev_splice_read(): switch to add_to_pipe()
  skb_splice_bits(): get rid of callback
  new helper: add_to_pipe()
  splice: lift pipe_lock out of splice_to_pipe()
  splice: switch get_iovec_page_array() to iov_iter
  splice_to_pipe(): don't open-code wakeup_pipe_readers()
  consistent treatment of EFAULT on O_DIRECT read/write

... and kill the ->splice_read() instances that can be switched to it

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

In gfs2_page_mkwrite, grab the inode glock in EX mode before calling
file_update_time: grabbing the lock may result in a call to
gfs2_dinode_in, which will reset the file times to their on-disk state.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

Make the code more readable by cleaning up the different ways of
initializing lock holders and checking for initialized lock holders:
mark lock holders as uninitialized by setting the holder's glock to NULL
(gfs2_holder_mark_uninitialized) instead of zeroing out the entire
object or using a separate flag.  Recognize initialized holders by their
non-NULL glock (gfs2_holder_initialized).  Don't zero out holder objects
which are immeditiately initialized via gfs2_holder_init or
gfs2_glock_nq_init.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

Pull GFS2 updates from Bob Peterson:
 "We've got nine patches this time:

   - Abhi Das has two patches that fix a GFS2 splice issue (and an
     adjustment).

   - Ben Marzinski has a patch which allows the proper unmount of a GFS2
     file system after hitting a withdraw error.

   - I have a patch to fix a problem where GFS2 would dereference an
     error value, plus three cosmetic / refactoring patches.

   - Daniel DeFreez has a patch to fix two glock reference count
     problems, where GFS2 was not properly "uninitializing" its glock
     holder on error paths.

   - Denys Vlasenko has a patch to change a function to not be inlined,
     thus reducing the memory footprint of the GFS2 module"

* tag 'gfs2-4.7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  GFS2: Refactor gfs2_remove_from_journal
  GFS2: Remove allocation parms from gfs2_rbm_find
  gfs2: use inode_lock/unlock instead of accessing i_mutex directly
  GFS2: Add calls to gfs2_holder_uninit in two error handlers
  GFS2: Don't dereference inode in gfs2_inode_lookup until it's valid
  GFS2: fs/gfs2/glock.c: Deinline do_error, save 1856 bytes
  gfs2: Use gfs2 wrapper to sync inode before calling generic_file_splice_read()
  GFS2: Get rid of dead code in inode_go_demote_ok
  GFS2: ignore unlock failures after withdraw

Pull vfs cleanups from Al Viro:
 "More cleanups from Christoph"

* 'work.preadv2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  nfsd: use RWF_SYNC
  fs: add RWF_DSYNC aand RWF_SYNC
  ceph: use generic_write_sync
  fs: simplify the generic_write_sync prototype
  fs: add IOCB_SYNC and IOCB_DSYNC
  direct-io: remove the offset argument to dio_complete
  direct-io: eliminate the offset argument to ->direct_IO
  xfs: eliminate the pos variable in xfs_file_dio_aio_write
  filemap: remove the pos argument to generic_file_direct_write
  filemap: remove pos variables in generic_file_read_iter

protected by glock and already used without locking the directory
by gfs2_get_name()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

i_mutex has been replaced by i_rwsem and directly accessing the
non-existent i_mutex breaks the kernel build.

Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>