linux-toradex.git/fs/gfs2/super.c, branch v4.1-rc5

VFS: normal filesystems (and lustre): d_inode() annotations

2015-04-15T19:06:57+00:00

that's the bulk of filesystem drivers dealing with inodes of their own

Signed-off-by: David Howells 
Signed-off-by: Al Viro

fs: export inode_to_bdi and use it in favor of mapping->backing_dev_info

2015-01-20T21:03:04+00:00

Now that we got rid of the bdi abuse on character devices we can always use
sb->s_bdi to get at the backing_dev_info for a file, except for the block
device special case.  Export inode_to_bdi and replace uses of
mapping->backing_dev_info with it to prepare for the removal of
mapping->backing_dev_info.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Tejun Heo 
Reviewed-by: Jan Kara 
Signed-off-by: Jens Axboe

GFS2: update freeze code to use freeze/thaw_super on all nodes

2014-11-17T10:36:39+00:00

The current gfs2 freezing code is considerably more complicated than it
should be because it doesn't use the vfs freezing code on any node except
the one that begins the freeze.  This is because it needs to acquire a
cluster glock before calling the vfs code to prevent a deadlock, and
without the new freeze_super and thaw_super hooks, that was impossible. To
deal with the issue, gfs2 had to do some hacky locking tricks to make sure
that a frozen node couldn't be holding on a lock it needed to do the
unfreeze ioctl.

This patch makes use of the new hooks to simply the gfs2 locking code. Now,
all the nodes in the cluster freeze and thaw in exactly the same way. Every
node in the cluster caches the freeze glock in the shared state.  The new
freeze_super hook allows the freezing node to grab this freeze glock in
the exclusive state without first calling the vfs freeze_super function.
All the nodes in the cluster see this lock change, and call the vfs
freeze_super function. The vfs locking code guarantees that the nodes can't
get stuck holding the glocks necessary to unfreeze the system.  To
unfreeze, the freezing node uses the new thaw_super hook to drop the freeze
glock. Again, all the nodes notice this, reacquire the glock in shared mode
and call the vfs thaw_super function.

Signed-off-by: Benjamin Marzinski 
Signed-off-by: Steven Whitehouse

GFS2: fs/gfs2/super.c: replace seq_printf by seq_puts

2014-08-21T09:22:05+00:00

fix checkpatch warnings:
"WARNING: Prefer seq_puts to seq_printf"

Cc: cluster-devel@redhat.com
Signed-off-by: Fabian Frederick 
Signed-off-by: Steven Whitehouse

sched: Remove proliferation of wait_on_bit() action functions

2014-07-16T13:10:39+00:00

The current "wait_on_bit" interface requires an 'action'
function to be provided which does the actual waiting.
There are over 20 such functions, many of them identical.
Most cases can be satisfied by one of just two functions, one
which uses io_schedule() and one which just uses schedule().

So:
 Rename wait_on_bit and        wait_on_bit_lock to
        wait_on_bit_action and wait_on_bit_lock_action
 to make it explicit that they need an action function.

 Introduce new wait_on_bit{,_lock} and wait_on_bit{,_lock}_io
 which are *not* given an action function but implicitly use
 a standard one.
 The decision to error-out if a signal is pending is now made
 based on the 'mode' argument rather than being encoded in the action
 function.

 All instances of the old wait_on_bit and wait_on_bit_lock which
 can use the new version have been changed accordingly and their
 action functions have been discarded.
 wait_on_bit{_lock} does not return any specific error code in the
 event of a signal so the caller must check for non-zero and
 interpolate their own error code as appropriate.

The wait_on_bit() call in __fscache_wait_on_invalidate() was
ambiguous as it specified TASK_UNINTERRUPTIBLE but used
fscache_wait_bit_interruptible as an action function.
David Howells confirms this should be uniformly
"uninterruptible"

The main remaining user of wait_on_bit{,_lock}_action is NFS
which needs to use a freezer-aware schedule() call.

A comment in fs/gfs2/glock.c notes that having multiple 'action'
functions is useful as they display differently in the 'wchan'
field of 'ps'. (and /proc/$PID/wchan).
As the new bit_wait{,_io} functions are tagged "__sched", they
will not show up at all, but something higher in the stack.  So
the distinction will still be visible, only with different
function names (gds2_glock_wait versus gfs2_glock_dq_wait in the
gfs2/glock.c case).

Since first version of this patch (against 3.15) two new action
functions appeared, on in NFS and one in CIFS.  CIFS also now
uses an action function that makes the same freezer aware
schedule call as NFS.

Signed-off-by: NeilBrown 
Acked-by: David Howells  (fscache, keys)
Acked-by: Steven Whitehouse  (gfs2)
Acked-by: Peter Zijlstra 
Cc: Oleg Nesterov 
Cc: Steve French 
Cc: Linus Torvalds 
Link: http://lkml.kernel.org/r/20140707051603.28027.72349.stgit@notabene.brown
Signed-off-by: Ingo Molnar

GFS2: remove transaction glock

2014-05-14T09:04:34+00:00

GFS2 has a transaction glock, which must be grabbed for every
transaction, whose purpose is to deal with freezing the filesystem.
Aside from this involving a large amount of locking, it is very easy to
make the current fsfreeze code hang on unfreezing.

This patch rewrites how gfs2 handles freezing the filesystem. The
transaction glock is removed. In it's place is a freeze glock, which is
cached (but not held) in a shared state by every node in the cluster
when the filesystem is mounted. This lock only needs to be grabbed on
freezing, and actions which need to be safe from freezing, like
recovery.

When a node wants to freeze the filesystem, it grabs this glock
exclusively.  When the freeze glock state changes on the nodes (either
from shared to unlocked, or shared to exclusive), the filesystem does a
special log flush.  gfs2_log_flush() does all the work for flushing out
the and shutting down the incore log, and then it tries to grab the
freeze glock in a shared state again.  Since the filesystem is stuck in
gfs2_log_flush, no new transaction can start, and nothing can be written
to disk. Unfreezing the filesytem simply involes dropping the freeze
glock, allowing gfs2_log_flush() to grab and then release the shared
lock, so it is cached for next time.

However, in order for the unfreezing ioctl to occur, gfs2 needs to get a
shared lock on the filesystem root directory inode to check permissions.
If that glock has already been grabbed exclusively, fsfreeze will be
unable to get the shared lock and unfreeze the filesystem.

In order to allow the unfreeze, this patch makes gfs2 grab a shared lock
on the filesystem root directory during the freeze, and hold it until it
unfreezes the filesystem.  The functions which need to grab a shared
lock in order to allow the unfreeze ioctl to be issued now use the lock
grabbed by the freeze code instead.

The freeze and unfreeze code take care to make sure that this shared
lock will not be dropped while another process is using it.

Signed-off-by: Benjamin Marzinski 
Signed-off-by: Steven Whitehouse

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

2014-04-04T22:39:39+00:00

Pull ext4 updates from Ted Ts'o:
 "Major changes for 3.14 include support for the newly added ZERO_RANGE
  and COLLAPSE_RANGE fallocate operations, and scalability improvements
  in the jbd2 layer and in xattr handling when the extended attributes
  spill over into an external block.

  Other than that, the usual clean ups and minor bug fixes"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (42 commits)
  ext4: fix premature freeing of partial clusters split across leaf blocks
  ext4: remove unneeded test of ret variable
  ext4: fix comment typo
  ext4: make ext4_block_zero_page_range static
  ext4: atomically set inode->i_flags in ext4_set_inode_flags()
  ext4: optimize Hurd tests when reading/writing inodes
  ext4: kill i_version support for Hurd-castrated file systems
  ext4: each filesystem creates and uses its own mb_cache
  fs/mbcache.c: doucple the locking of local from global data
  fs/mbcache.c: change block and index hash chain to hlist_bl_node
  ext4: Introduce FALLOC_FL_ZERO_RANGE flag for fallocate
  ext4: refactor ext4_fallocate code
  ext4: Update inode i_size after the preallocation
  ext4: fix partial cluster handling for bigalloc file systems
  ext4: delete path dealloc code in ext4_ext_handle_uninitialized_extents
  ext4: only call sync_filesystm() when remounting read-only
  fs: push sync_filesystem() down to the file system's remount_fs()
  jbd2: improve error messages for inconsistent journal heads
  jbd2: minimize region locked by j_list_lock in jbd2_journal_forget()
  jbd2: minimize region locked by j_list_lock in journal_get_create_access()
  ...

Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw

2014-04-04T21:49:16+00:00

Pull GFS2 updates from Steven Whitehouse:
 "One of the main highlights this time, is not the patches themselves
  but instead the widening contributor base.  It is good to see that
  interest is increasing in GFS2, and I'd like to thank all the
  contributors to this patch set.

  In addition to the usual set of bug fixes and clean ups, there are
  patches to improve inode creation performance when xattrs are required
  and some improvements to the transaction code which is intended to
  help improve scalability after further changes in due course.

  Journal extent mapping is also updated to make it more efficient and
  again, this is a foundation for future work in this area.

  The maximum number of ACLs has been increased to 300 (for a 4k block
  size) which means that even with a few additional xattrs from selinux,
  everything should fit within a single fs block.

  There is also a patch to bring GFS2's own copy of the writepages code
  up to the same level as the core VFS.  Eventually we may be able to
  merge some of this code, since it is fairly similar.

  The other major change this time, is bringing consistency to the
  printing of messages via fs_, pr_ macros"

* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw: (29 commits)
  GFS2: Fix address space from page function
  GFS2: Fix uninitialized VFS inode in gfs2_create_inode
  GFS2: Fix return value in slot_get()
  GFS2: inline function gfs2_set_mode
  GFS2: Remove extraneous function gfs2_security_init
  GFS2: Increase the max number of ACLs
  GFS2: Re-add a call to log_flush_wait when flushing the journal
  GFS2: Ensure workqueue is scheduled after noexp request
  GFS2: check NULL return value in gfs2_ok_to_move
  GFS2: Convert gfs2_lm_withdraw to use fs_err
  GFS2: Use fs_ more often
  GFS2: Use pr_ more consistently
  GFS2: Move recovery variables to journal structure in memory
  GFS2: global conversion to pr_foo()
  GFS2: return -E2BIG if hit the maximum limits of ACLs
  GFS2: Clean up journal extent mapping
  GFS2: replace kmalloc - __vmalloc / memset 0
  GFS2: Remove extra "if" in gfs2_log_flush()
  fs: NULL dereference in posix_acl_to_xattr()
  GFS2: Move log buffer accounting to transaction
  ...

mm + fs: store shadow entries in page cache

2014-04-03T23:21:01+00:00

Reclaim will be leaving shadow entries in the page cache radix tree upon
evicting the real page.  As those pages are found from the LRU, an
iput() can lead to the inode being freed concurrently.  At this point,
reclaim must no longer install shadow pages because the inode freeing
code needs to ensure the page tree is really empty.

Add an address_space flag, AS_EXITING, that the inode freeing code sets
under the tree lock before doing the final truncate.  Reclaim will check
for this flag before installing shadow pages.

Signed-off-by: Johannes Weiner 
Reviewed-by: Rik van Riel 
Reviewed-by: Minchan Kim 
Cc: Andrea Arcangeli 
Cc: Bob Liu 
Cc: Christoph Hellwig 
Cc: Dave Chinner 
Cc: Greg Thelen 
Cc: Hugh Dickins 
Cc: Jan Kara 
Cc: KOSAKI Motohiro 
Cc: Luigi Semenzato 
Cc: Mel Gorman 
Cc: Metin Doslu 
Cc: Michel Lespinasse 
Cc: Ozgun Erdogan 
Cc: Peter Zijlstra 
Cc: Roman Gushchin 
Cc: Ryan Mallon 
Cc: Tejun Heo 
Cc: Vlastimil Babka 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

GFS2: Fix uninitialized VFS inode in gfs2_create_inode

2014-03-31T15:41:39+00:00

When gfs2_create_inode() fails due to quota violation, the VFS
inode is not completely uninitialized. This can cause a list
corruption error.

This patch correctly uninitializes the VFS inode when a quota
violation occurs in the gfs2_create_inode codepath.

Resolves: rhbz#1059808
Signed-off-by: Abhi Das 
Signed-off-by: Steven Whitehouse