linux-toradex.git/fs/gfs2/super.h, branch v5.18

gfs2: Don't release and reacquire local statfs bh

2021-08-20T14:03:46+00:00

Before this patch, several functions in gfs2 related to the updating
of the statfs file used a newly acquired/read buffer_head for the
local statfs file. This is completely unnecessary, because other nodes
should never update it. Recreating the buffer is a waste of time.

This patch allows gfs2 to read in the local statefs buffer_head at
mount time and keep it around until unmount time.

Signed-off-by: Bob Peterson

gfs2: make function gfs2_make_fs_ro() to void type

2021-03-07T16:04:55+00:00

It fixes the following warning detected by coccinelle:
./fs/gfs2/super.c:592:5-10: Unneeded variable: "error". Return "0" on
line 628

Reported-by: Abaci Robot 
Signed-off-by: Yang Li 
Signed-off-by: Bob Peterson 
Signed-off-by: Andreas Gruenbacher

gfs2: Add trusted xattr support

2021-02-08T12:01:24+00:00

Add support for an additional filesystem version (sb_fs_format = 1802).
When a filesystem with the new version is mounted, the filesystem
supports "trusted.*" xattrs.

In addition, version 1802 filesystems implement a form of forward
compatibility for xattrs: when xattrs with an unknown prefix (ea_type)
are found on a version 1802 filesystem, those attributes are not shown
by listxattr, and they are not accessible by getxattr, setxattr, or
removexattr.

This mechanism might turn out to be what we need in the future, but if
not, we can always bump the filesystem version and break compatibility
instead.

Signed-off-by: Andreas Gruenbacher 
Signed-off-by: Andrew Price

gfs2: Enable rgrplvb for sb_fs_format 1802

2021-02-08T12:00:36+00:00

Turn on rgrplvb by default for sb_fs_format > 1801.

Mount options still have to override this so a new args field to
differentiate between 'off' and 'not specified' is added, and the new
default is applied only when it's not specified.

Signed-off-by: Andrew Price 
Signed-off-by: Andreas Gruenbacher

gfs2: lookup local statfs inodes prior to journal recovery

2020-10-23T13:47:14+00:00

We need to lookup the master statfs inode and the local statfs
inodes earlier in the mount process (in init_journal) so journal
recovery can use them when it attempts to recover the statfs info.
We lookup all the local statfs inodes and store them in a linked
list to allow a node to recover statfs info for other nodes in the
cluster.

Signed-off-by: Abhi Das 
Signed-off-by: Andreas Gruenbacher

gfs2: Add fields for statfs info in struct gfs2_log_header_host

2020-10-20T21:16:22+00:00

And read these in __get_log_header() from the log header.
Also make gfs2_statfs_change_out() non-static so it can be used
outside of super.c

Signed-off-by: Abhi Das 
Signed-off-by: Andreas Gruenbacher

gfs2: Force withdraw to replay journals and wait for it to finish

2020-02-27T13:53:12+00:00

When a node withdraws from a file system, it often leaves its journal
in an incomplete state. This is especially true when the withdraw is
caused by io errors writing to the journal. Before this patch, a
withdraw would try to write a "shutdown" record to the journal, tell
dlm it's done with the file system, and none of the other nodes
know about the problem. Later, when the problem is fixed and the
withdrawn node is rebooted, it would then discover that its own
journal was incomplete, and replay it. However, replaying it at this
point is almost guaranteed to introduce corruption because the other
nodes are likely to have used affected resource groups that appeared
in the journal since the time of the withdraw. Replaying the journal
later will overwrite any changes made, and not through any fault of
dlm, which was instructed during the withdraw to release those
resources.

This patch makes file system withdraws seen by the entire cluster.
Withdrawing nodes dequeue their journal glock to allow recovery.

The remaining nodes check all the journals to see if they are
clean or in need of replay. They try to replay dirty journals, but
only the journals of withdrawn nodes will be "not busy" and
therefore available for replay.

Until the journal replay is complete, no i/o related glocks may be
given out, to ensure that the replay does not cause the
aforementioned corruption: We cannot allow any journal replay to
overwrite blocks associated with a glock once it is held.

The "live" glock which is now used to signal when a withdraw
occurs. When a withdraw occurs, the node signals its withdraw by
dequeueing the "live" glock and trying to enqueue it in EX mode,
thus forcing the other nodes to all see a demote request, by way
of a "1CB" (one callback) try lock. The "live" glock is not
granted in EX; the callback is only just used to indicate a
withdraw has occurred.

Note that all nodes in the cluster must wait for the recovering
node to finish replaying the withdrawing node's journal before
continuing. To this end, it checks that the journals are clean
multiple times in a retry loop.

Also note that the withdraw function may be called from a wide
variety of situations, and therefore, we need to take extra
precautions to make sure pointers are valid before using them in
many circumstances.

We also need to take care when glocks decide to withdraw, since
the withdraw code now uses glocks.

Also, before this patch, if a process encountered an error and
decided to withdraw, if another process was already withdrawing,
the second withdraw would be silently ignored, which set it free
to unlock its glocks. That's correct behavior if the original
withdrawer encounters further errors down the road. But if
secondary waiters don't wait for the journal replay, unlocking
glocks will allow other nodes to use them, despite the fact that
the journal containing those blocks is being replayed. The
replay needs to finish before our glocks are released to other
nodes. IOW, secondary withdraws need to wait for the first
withdraw to finish.

For example, if an rgrp glock is unlocked by a process that didn't
wait for the first withdraw, a journal replay could introduce file
system corruption by replaying a rgrp block that has already been
granted to a different cluster node.

Signed-off-by: Bob Peterson

gfs2: Convert gfs2 to fs_context

2019-09-19T02:47:05+00:00

Convert gfs2 and gfs2meta to fs_context. Removes the duplicated vfs code
from gfs2_mount and instead uses the new vfs_get_block_super() before
switching the ->root to the appropriate dentry.

The mount option parsing has been converted to the new API and error
reporting for invalid options has been made more precise at the same
time.

All of the mount/remount code has been moved into ops_fstype.c

Signed-off-by: Andrew Price 
Signed-off-by: David Howells 
cc: cluster-devel@redhat.com
Signed-off-by: Al Viro

gfs2: Clean up freeing struct gfs2_sbd

2019-06-27T18:53:45+00:00

Add a free_sbd function for freeing a struct gfs2_sbd.  Use that for
freeing a super-block descriptor, either directly or via kobject_put.
Free sd_lkstats inside the kobject release function: that way,
gfs2_put_super will no longer leak sd_lkstats.

Signed-off-by: Andreas Gruenbacher

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 398

2019-06-05T15:37:12+00:00

Based on 1 normalized pattern(s):

  this copyrighted material is made available to anyone wishing to use
  modify copy or redistribute it subject to the terms and conditions
  of the gnu general public license version 2

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 44 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Reviewed-by: Kate Stewart 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531081038.653000175@linutronix.de
Signed-off-by: Greg Kroah-Hartman