linux-toradex.git/fs/gfs2, branch v3.7.2

GFS2: Test bufdata with buffer locked and gfs2_log_lock held

2012-11-07T09:43:03+00:00

In gfs2_trans_add_bh(), gfs2 was testing if a there was a bd attached to the
buffer without having the gfs2_log_lock held. It was then assuming it would
stay attached for the rest of the function. However, without either the log
lock being held of the buffer locked, __gfs2_ail_flush() could detach bd at any
time.  This patch moves the locking before the test.  If there isn't a bd
already attached, gfs2 can safely allocate one and attach it before locking.
There is no way that the newly allocated bd could be on the ail list,
and thus no way for __gfs2_ail_flush() to detach it.

Signed-off-by: Benjamin Marzinski 
Signed-off-by: Steven Whitehouse

GFS2: Don't call file_accessed() with a shared glock

2012-11-07T09:42:49+00:00

file_accessed() was being called by gfs2_mmap() with a shared glock. If it
needed to update the atime, it was crashing because it dirtied the inode in
gfs2_dirty_inode() without holding an exclusive lock. gfs2_dirty_inode()
checked if the caller was already holding a glock, but it didn't make sure that
the glock was in the exclusive state. Now, instead of calling file_accessed()
while holding the shared lock in gfs2_mmap(), file_accessed() is called after
grabbing and releasing the glock to update the inode.  If file_accessed() needs
to update the atime, it will grab an exclusive lock in gfs2_dirty_inode().

gfs2_dirty_inode() now also checks to make sure that if the calling process has
already locked the glock, it has an exclusive lock.

Signed-off-by: Benjamin Marzinski 
Signed-off-by: Steven Whitehouse

GFS2: Fix FITRIM argument handling

2012-11-07T09:41:58+00:00

Currently implementation in gfs2 uses FITRIM arguments as it were in
file system blocks units which is wrong. The FITRIM arguments
(fstrim_range.start, fstrim_range.len and fstrim_range.minlen) are
actually in bytes.

Moreover, check for start argument beyond the end of file system, len
argument being smaller than file system block and minlen argument being
bigger than biggest resource group were missing.

This commit converts the code to convert FITRIM argument to file system
blocks and also adds appropriate checks mentioned above.

All the problems were recognised by xfstests 251 and 260.

Signed-off-by: Lukas Czerner 
Signed-off-by: Steven Whitehouse

GFS2: Require user to provide argument for FITRIM

2012-11-07T09:41:37+00:00

When the fstrim_range argument is not provided by user in FITRIM ioctl
we should just return EFAULT and not promoting bad behaviour by filling
the structure in kernel. Let the user deal with it.

Signed-off-by: Lukas Czerner 
Signed-off-by: Steven Whitehouse

GFS2: Clean up some unused assignments

2012-11-07T09:41:07+00:00

Cleans up two cases where variables were assigned values but then never
used again.

Signed-off-by: Andrew Price 
Signed-off-by: Steven Whitehouse

GFS2: Fix possible null pointer deref in gfs2_rs_alloc

2012-11-07T09:40:39+00:00

Despite the return value from kmem_cache_zalloc() being checked, the
error wasn't being returned until after a possible null pointer
dereference. This patch returns the error immediately, allowing the
removal of the error variable.

Signed-off-by: Andrew Price 
Signed-off-by: Steven Whitehouse

GFS2: Fix an unchecked error from gfs2_rs_alloc

2012-11-07T09:40:05+00:00

Check the return value of gfs2_rs_alloc(ip) and avoid a possible null
pointer dereference.

Signed-off-by: Andrew Price 
Signed-off-by: Steven Whitehouse

tmpfs,ceph,gfs2,isofs,reiserfs,xfs: fix fh_len checking

2012-10-10T03:33:55+00:00

Fuzzing with trinity oopsed on the 1st instruction of shmem_fh_to_dentry(),
	u64 inum = fid->raw[2];
which is unhelpfully reported as at the end of shmem_alloc_inode():

BUG: unable to handle kernel paging request at ffff880061cd3000
IP: [] shmem_alloc_inode+0x40/0x40
Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
Call Trace:
 [] ? exportfs_decode_fh+0x79/0x2d0
 [] do_handle_open+0x163/0x2c0
 [] sys_open_by_handle_at+0xc/0x10
 [] tracesys+0xe1/0xe6

Right, tmpfs is being stupid to access fid->raw[2] before validating that
fh_len includes it: the buffer kmalloc'ed by do_sys_name_to_handle() may
fall at the end of a page, and the next page not be present.

But some other filesystems (ceph, gfs2, isofs, reiserfs, xfs) are being
careless about fh_len too, in fh_to_dentry() and/or fh_to_parent(), and
could oops in the same way: add the missing fh_len checks to those.

Reported-by: Sasha Levin 
Signed-off-by: Hugh Dickins 
Cc: Al Viro 
Cc: Sage Weil 
Cc: Steven Whitehouse 
Cc: Christoph Hellwig 
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro

mm: kill vma flag VM_CAN_NONLINEAR

2012-10-09T07:22:17+00:00

Move actual pte filling for non-linear file mappings into the new special
vma operation: ->remap_pages().

Filesystems must implement this method to get non-linear mapping support,
if it uses filemap_fault() then generic_file_remap_pages() can be used.

Now device drivers can implement this method and obtain nonlinear vma support.

Signed-off-by: Konstantin Khlebnikov 
Cc: Alexander Viro 
Cc: Carsten Otte 
Cc: Chris Metcalf 	#arch/tile
Cc: Cyrill Gorcunov 
Cc: Eric Paris 
Cc: H. Peter Anvin 
Cc: Hugh Dickins 
Cc: Ingo Molnar 
Cc: James Morris 
Cc: Jason Baron 
Cc: Kentaro Takeda 
Cc: Matt Helsley 
Cc: Nick Piggin 
Cc: Oleg Nesterov 
Cc: Peter Zijlstra 
Cc: Robert Richter 
Cc: Suresh Siddha 
Cc: Tetsuo Handa 
Cc: Venkatesh Pallipadi 
Acked-by: Linus Torvalds 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

2012-10-02T18:11:09+00:00

Pull user namespace changes from Eric Biederman:
"This is a mostly modest set of changes to enable basic user namespace
support. This allows the code to code to compile with user namespaces
enabled and removes the assumption there is only the initial user
namespace. Everything is converted except for the most complex of the
filesystems: autofs4, 9p, afs, ceph, cifs, coda, fuse, gfs2, ncpfs,
nfs, ocfs2 and xfs as those patches need a bit more review.

The strategy is to push kuid_t and kgid_t values are far down into
subsystems and filesystems as reasonable. Leaving the make_kuid and
from_kuid operations to happen at the edge of userspace, as the values
come off the disk, and as the values come in from the network.
Letting compile type incompatible compile errors (present when user
namespaces are enabled) guide me to find the issues.

The most tricky areas have been the places where we had an implicit
union of uid and gid values and were storing them in an unsigned int.
Those places were converted into explicit unions. I made certain to
handle those places with simple trivial patches.

Out of that work I discovered we have generic interfaces for storing
quota by projid. I had never heard of the project identifiers before.
Adding full user namespace support for project identifiers accounts
for most of the code size growth in my git tree.

Ultimately there will be work to relax privlige checks from
"capable(FOO)" to "ns_capable(user_ns, FOO)" where it is safe allowing
root in a user names to do those things that today we only forbid to
non-root users because it will confuse suid root applications.

While I was pushing kuid_t and kgid_t changes deep into the audit code
I made a few other cleanups. I capitalized on the fact we process
netlink messages in the context of the message sender. I removed
usage of NETLINK_CRED, and started directly using current->tty.

Some of these patches have also made it into maintainer trees, with no
problems from identical code from different trees showing up in
linux-next.

After reading through all of this code I feel like I might be able to
win a game of kernel trivial pursuit."

Fix up some fairly trivial conflicts in netfilter uid/git logging code.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (107 commits)
userns: Convert the ufs filesystem to use kuid/kgid where appropriate
userns: Convert the udf filesystem to use kuid/kgid where appropriate
userns: Convert ubifs to use kuid/kgid
userns: Convert squashfs to use kuid/kgid where appropriate
userns: Convert reiserfs to use kuid and kgid where appropriate
userns: Convert jfs to use kuid/kgid where appropriate
userns: Convert jffs2 to use kuid and kgid where appropriate
userns: Convert hpfs to use kuid and kgid where appropriate
userns: Convert btrfs to use kuid/kgid where appropriate
userns: Convert bfs to use kuid/kgid where appropriate
userns: Convert affs to use kuid/kgid wherwe appropriate
userns: On alpha modify linux_to_osf_stat to use convert from kuids and kgids
userns: On ia64 deal with current_uid and current_gid being kuid and kgid
userns: On ppc convert current_uid from a kuid before printing.
userns: Convert s390 getting uid and gid system calls to use kuid and kgid
userns: Convert s390 hypfs to use kuid and kgid where appropriate
userns: Convert binder ipc to use kuids
userns: Teach security_path_chown to take kuids and kgids
userns: Add user namespace support to IMA
userns: Convert EVM to deal with kuids and kgids in it's hmac computation
...