linux-toradex.git/fs/iomap.c, branch v4.19-rc4

Merge tag 'xfs-4.19-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

2018-08-22T01:15:47+00:00

Pull xfs fixes from Darrick Wong:

 - Fix an uninitialized variable

 - Don't use obviously garbage AG header counters to calculate
   transaction reservations

 - Trigger icount recalculation on bad icount when mounting

* tag 'xfs-4.19-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: fix WARN_ON_ONCE on uninitialized variable
  xfs: sanity check ag header values in xrep_calc_ag_resblks
  xfs: recalculate summary counters at mount time if icount is bad

Merge tag 'xfs-4.19-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

2018-08-14T15:56:02+00:00

Pull xfs updates from Darrick Wong:
 "This is the second part of the XFS changes for 4.19.

  The biggest changes are the removal of buffer heads frm XFS, a massive
  reworking of the deferred transaction operations handling code, the
  removal of the long defunct barrier/nobarrier mount options, and the
  addition of a few more online repair functions.

  Summary:

   - Use extent maps to track pagecache page status instead of
     bufferhead state.

   - Refactor pagecache read and write paths to use the new iomap
     library functions, which enable us to drop the old bufferhead code
     for pagesize == blocksize filesystems.

   - Set up parallel per-block-per-page metadata to track subpage
     information that was tracked by buffer heads, which enables us to
     drop the old bufferhead code for pagesize > blocksize filesystems.

   - Tie a deferred ops control structure to a transaction so that we
     can take advantage of an upper-level dfops without having to plumb
     pointer passing through the code.

   - Refactor the deferred ops code to track deferred ops as part of the
     transaction structure (instead of as a separate data structure) so
     that we can simplify the scoping rules around defer_ops.

   - Refactor twisty delwri buffer submission code to avoid deadlocks.

   - Shorten and fix indenting problems in the scrub code.

   - Detect obviously bad summary counts at mount and fix them.

   - Directly associate deferred ops control structure with a
     transaction so that callers no longer have to manage it themselves.

   - Remove a couple of IRIX-era inode macros.

   - Remove the long-deprecated 'barrier' and 'nobarrier' mount options.

   - Clean up the inode fork structure a bit.

   - Check for bad fs summary counter values in the superblock.

   - Reduce COW fork lookups during writeback.

   - Refactor the deferred ops control structures into the transaction
     structure, thereby eliminating the need for transaction users to
     handle the deferred ops as a separate data structure.

   - Add the ability to repair AG headers online.

   - Fix a crash due to insufficient return value checking.

   - Various fixes and cleanups"

* tag 'xfs-4.19-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (155 commits)
  xfs: fix a null pointer dereference in xfs_bmap_extents_to_btree
  xfs: remove b_last_holder & associated macros
  iomap: Switch to offset_in_page for clarity
  xfs: Close race between direct IO and xfs_break_layouts()
  xfs: repair the AGI
  xfs: repair the AGFL
  xfs: repair the AGF
  xfs: remove dead error handling code in xfs_dquot_disk_alloc()
  xfs: use WRITE_ONCE to update if_seq
  xfs: fix a comment in xfs_log_reserve
  xfs: only validate summary counts on primary superblock
  xfs: substitute spaces with tabs
  xfs: fold dfops into the transaction
  xfs: always defer agfl block frees
  xfs: pass transaction to xfs_defer_add()
  xfs: replace xfs_defer_ops ->dop_pending with on-stack list
  xfs: cancel dfops on xfs_defer_finish() error
  xfs: clean out superfluous dfops dop params/vars
  xfs: drop dop param from xfs_defer_op_type ->finish_item() callback
  xfs: automatic dfops inode relogging
  ...

iomap: fix WARN_ON_ONCE on uninitialized variable

2018-08-14T15:17:02+00:00

In commit 9dc55f1389f9569 ("iomap: add support for sub-pagesize buffered
I/O without buffer heads") we moved the initialization of poff (it's
computed from pos) into a separate helper function.  Inline data only
ever deals with pos == 0, hence the WARN_ON_ONCE, but now we're testing
an uninitialized variable.

Therefore, change the test to check the parameter directly.

Signed-off-by: Darrick J. Wong 
Reviewed-by: Allison Henderson 
Reviewed-by: Carlos Maiolino

Merge branch 'iomap-4.19-merge' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

2018-08-14T05:29:03+00:00

Pull fs iomap refactoring from Darrick Wong:
 "This is the first part of the XFS changes for 4.19.

  Christoph and Andreas coordinated some refactoring work on the iomap
  code in preparation for removing buffer heads from XFS and porting
  gfs2 to iomap. I'm sending this small pull request ahead of the main
  XFS merge to avoid holding up gfs2 unnecessarily"

* 'iomap-4.19-merge' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: add inline data support to iomap_readpage_actor
  iomap: support direct I/O to inline data
  iomap: refactor iomap_dio_actor
  iomap: add initial support for writes without buffer heads
  iomap: add an iomap-based readpage and readpages implementation
  iomap: add private pointer to struct iomap
  iomap: add a page_done callback
  iomap: generic inline data handling
  iomap: complete partial direct I/O writes synchronously
  iomap: mark newly allocated buffer heads as new
  fs: factor out a __generic_write_end helper

iomap: Switch to offset_in_page for clarity

2018-08-12T15:37:31+00:00

Instead of open-coding pos & (PAGE_SIZE - 1) and pos & ~PAGE_MASK, use
the offset_in_page macro.

Signed-off-by: Andreas Gruenbacher 
Reviewed-by: Darrick J. Wong 
Signed-off-by: Darrick J. Wong

fs: fix iomap_bmap position calculation

2018-08-02T20:09:27+00:00

The position calculation in iomap_bmap() shifts bno the wrong way,
so we don't progress properly and end up re-mapping block zero
over and over, yielding an unchanging physical block range as the
logical block advances:

# filefrag -Be file
 ext:   logical_offset:     physical_offset: length:   expected: flags:
   0:      0..       0:      21..        21:      1:             merged
   1:      1..       1:      21..        21:      1:         22: merged
Discontinuity: Block 1 is at 21 (was 22)
   2:      2..       2:      21..        21:      1:         22: merged
Discontinuity: Block 2 is at 21 (was 22)
   3:      3..       3:      21..        21:      1:         22: merged

This breaks the FIBMAP interface for anyone using it (XFS), which
in turn breaks LILO, zipl, etc.

Bug-actually-spotted-by: Darrick J. Wong 
Fixes: 89eb1906a953 ("iomap: add an iomap-based bmap implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Sandeen 
Reviewed-by: Darrick J. Wong 
Signed-off-by: Darrick J. Wong

iomap: add support for sub-pagesize buffered I/O without buffer heads

2018-07-12T05:26:05+00:00

After already supporting a simple implementation of buffered writes for
the blocksize == PAGE_SIZE case in the last commit this adds full support
even for smaller block sizes.   There are three bits of per-block
information in the buffer_head structure that really matter for the iomap
read and write path:

 - uptodate status (BH_uptodate)
 - marked as currently under read I/O (BH_Async_Read)
 - marked as currently under write I/O (BH_Async_Write)

Instead of having new per-block structures this now adds a per-page
structure called struct iomap_page to track this information in a slightly
different form:

 - a bitmap for the per-block uptodate status.  For worst case of a 64k
   page size system this bitmap needs to contain 128 bits.  For the
   typical 4k page size case it only needs 8 bits, although we still
   need a full unsigned long due to the way the atomic bitmap API works.
 - two atomic_t counters are used to track the outstanding read and write
   counts

There is quite a bit of boilerplate code as the buffered I/O path uses
various helper methods, but the actual code is very straight forward.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Brian Foster 
Reviewed-by: Darrick J. Wong 
Signed-off-by: Darrick J. Wong

iomap: add inline data support to iomap_readpage_actor

2018-07-03T16:07:47+00:00

Just copy the inline data into the page using the existing helper.

Signed-off-by: Andreas Gruenbacher 
Signed-off-by: Christoph Hellwig 
Reviewed-by: Darrick J. Wong 
Signed-off-by: Darrick J. Wong

iomap: support direct I/O to inline data

2018-07-03T16:07:47+00:00

Add support for reading from and writing to inline data to iomap_dio_rw.
This saves filesystems from having to implement fallback code for this
case.

The inline data is actually cached in the inode, so the I/O is only
direct in the sense that it doesn't go through the page cache.

Signed-off-by: Andreas Gruenbacher 
Reviewed-by: Darrick J. Wong 
Signed-off-by: Darrick J. Wong

iomap: refactor iomap_dio_actor

2018-07-03T16:07:46+00:00

Split the function up into two helpers for the bio based I/O and hole
case, and a small helper to call the two.  This separates the code a
little better in preparation for supporting I/O to inline data.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Andreas Gruenbacher 
Reviewed-by: Darrick J. Wong 
Signed-off-by: Darrick J. Wong