linux-toradex.git/fs/isofs, branch v2.6.36-rc2

isofs: Fix lseek() to position beyond 4 GB

2010-08-11T04:29:47+00:00

isofs supports files larger than 4 GB by using multi-extent files.
However an lseek() to a position beyond 4 GB in such a file will
fail with EINVAL, because s_maxbytes in the isofs superblock is
initialized to 2^32-1, and generic_file_llseek() checks against
that value.

I therefore suggest increasing the value of s_maxbytes to have
full support for large files in isofs. With multi-extent files, file
size is only limited by the maximum size of the file system (8 TB),
so this seems a reasonable value for s_maxbytes.

Signed-off-by: Jan Andres 
Signed-off-by: Al Viro

fs/: do not fallback to default_llseek() when readdir() uses BKL

2010-05-27T16:12:56+00:00

Do not use the fallback default_llseek() if the readdir operation of the
filesystem still uses the big kernel lock.

Since llseek() modifies
file->f_pos of the directory directly it may need locking to not confuse
readdir which usually uses file->f_pos directly as well

Since the special characteristics of the BKL (unlocked on schedule) are
not necessary in this case, the inode mutex can be used for locking as
provided by generic_file_llseek().  This is only possible since all
filesystems, except reiserfs, either use a directory as a flat file or
with disk address offsets.  Reiserfs on the other hand uses a 32bit hash
off the filename as the offset so generic_file_llseek() can get used as
well since the hash is always smaller than sb->s_maxbytes (= (512 << 32) -
blocksize).

Signed-off-by: Jan Blunck 
Acked-by: Jan Kara 
Acked-by: Anders Larsen 
Cc: Frederic Weisbecker 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32+00:00

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo 
Guess-its-ok-by: Christoph Lameter 
Cc: Ingo Molnar 
Cc: Lee Schermerhorn

Merge branch 'for-2.6.33' of git://linux-nfs.org/~bfields/linux

2009-12-16T18:43:34+00:00

* 'for-2.6.33' of git://linux-nfs.org/~bfields/linux: (42 commits)
  nfsd: remove pointless paths in file headers
  nfsd: move most of nfsfh.h to fs/nfsd
  nfsd: remove unused field rq_reffh
  nfsd: enable V4ROOT exports
  nfsd: make V4ROOT exports read-only
  nfsd: restrict filehandles accepted in V4ROOT case
  nfsd: allow exports of symlinks
  nfsd: filter readdir results in V4ROOT case
  nfsd: filter lookup results in V4ROOT case
  nfsd4: don't continue "under" mounts in V4ROOT case
  nfsd: introduce export flag for v4 pseudoroot
  nfsd: let "insecure" flag vary by pseudoflavor
  nfsd: new interface to advertise export features
  nfsd: Move private headers to source directory
  vfs: nfsctl.c un-used nfsd #includes
  lockd: Remove un-used nfsd headers #includes
  s390: remove un-used nfsd #includes
  sparc: remove un-used nfsd #includes
  parsic: remove un-used nfsd #includes
  compat.c: Remove dependence on nfsd private headers
  ...

zisofs: Implement reading of compressed files when PAGE_CACHE_SIZE > compress block size

2009-12-10T14:02:49+00:00

Also split and cleanup zisofs_readpage() when we are changing it anyway.

Signed-off-by: Jan Kara

nfs: new subdir Documentation/filesystems/nfs

2009-10-27T23:34:04+00:00

We're adding enough nfs documentation that it may as well have its own
subdirectory.

Acked-by: Randy Dunlap 
Signed-off-by: J. Bruce Fields

fs: Make unload_nls() NULL pointer safe

2009-09-24T11:47:42+00:00

Most call sites of unload_nls() do:
	if (nls)
		unload_nls(nls);

Check the pointer inside unload_nls() like we do in kfree() and
simplify the call sites.

Signed-off-by: Thomas Gleixner 
Cc: Steve French 
Cc: OGAWA Hirofumi 
Cc: Roman Zippel 
Cc: Dave Kleikamp 
Cc: Petr Vandrovec 
Cc: Anton Altaparmakov 
Signed-off-by: Al Viro

isofs: fix Joliet regression

2009-07-11T02:18:59+00:00

commit 5404ac8e4418ab3d254950ee4f9bcafc1da20b4a ("isofs: cleanup mount
option processing") missed conversion of joliet option flag resulting
in non-working Joliet support.

CC: walt 
Signed-off-by: Bartlomiej Zolnierkiewicz 
Signed-off-by: Jan Kara 
Signed-off-by: Linus Torvalds

isofs: cleanup mount option processing

2009-06-18T20:03:45+00:00

Remove unused variables from isofs_sb_info (used to be some mount
options), unify variables for option to use 0/1 (some options used
'y'/'n'), use bit fields for option flags in superblock.

Signed-off-by: Jan Kara 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

isofs: fix setting of uid and gid to 0

2009-06-18T20:03:45+00:00

isofs allows setting of default uid and gid of files but value 0 was used
to indicate that user did not specify any uid/gid mount option.  Since
this option also overrides uid/gid set in Rock Ridge extension, it makes
sense to allow forcing uid/gid 0.  Fix option processing to allow this.

Cc: 
Signed-off-by: Jan Kara 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds