linux-toradex.git/fs/jbd2/commit.c, branch v3.14.57

jbd2: avoid infinite loop when destroying aborted journal

2015-10-22T21:39:22+00:00

commit 841df7df196237ea63233f0f9eaa41db53afd70f upstream.

Commit 6f6a6fda2945 "jbd2: fix ocfs2 corrupt when updating journal
superblock fails" changed jbd2_cleanup_journal_tail() to return EIO
when the journal is aborted. That makes logic in
jbd2_log_do_checkpoint() bail out which is fine, except that
jbd2_journal_destroy() expects jbd2_log_do_checkpoint() to always make
a progress in cleaning the journal. Without it jbd2_journal_destroy()
just loops in an infinite loop.

Fix jbd2_journal_destroy() to cleanup journal checkpoint lists of
jbd2_log_do_checkpoint() fails with error.

Reported-by: Eryu Guan 
Tested-by: Eryu Guan 
Fixes: 6f6a6fda294506dfe0e3e0a253bb2d2923f28f0a
Signed-off-by: Jan Kara 
Signed-off-by: Theodore Ts'o 
Signed-off-by: Greg Kroah-Hartman

jbd2: fix descriptor block size handling errors with journal_csum

2014-09-05T23:34:17+00:00

commit db9ee220361de03ee86388f9ea5e529eaad5323c upstream.

It turns out that there are some serious problems with the on-disk
format of journal checksum v2.  The foremost is that the function to
calculate descriptor tag size returns sizes that are too big.  This
causes alignment issues on some architectures and is compounded by the
fact that some parts of jbd2 use the structure size (incorrectly) to
determine the presence of a 64bit journal instead of checking the
feature flags.

Therefore, introduce journal checksum v3, which enlarges the
descriptor block tag format to allow for full 32-bit checksums of
journal blocks, fix the journal tag function to return the correct
sizes, and fix the jbd2 recovery code to use feature flags to
determine 64bitness.

Add a few function helpers so we don't have to open-code quite so
many pieces.

Switching to a 16-byte block size was found to increase journal size
overhead by a maximum of 0.1%, to convert a 32-bit journal with no
checksumming to a 32-bit journal with checksum v3 enabled.

Signed-off-by: Darrick J. Wong 
Reported-by: TR Reardon 
Signed-off-by: Theodore Ts'o 
Signed-off-by: Greg Kroah-Hartman

jbd2: Fix endian mixing problems in the checksumming code

2013-08-28T18:59:58+00:00

In the jbd2 checksumming code, explicitly declare separate variables with
endianness information so that we don't get confused and screw things up again.
Also fixes sparse warnings.

Signed-off-by: Darrick J. Wong 
Signed-off-by: "Theodore Ts'o"

jbd2: fix duplicate debug label for phase 2

2013-06-13T02:56:35+00:00

Currently we see this output:

  $git grep phase fs/jbd2
  fs/jbd2/commit.c:       jbd_debug(3, "JBD2: commit phase 1\n");
  fs/jbd2/commit.c:       jbd_debug(3, "JBD2: commit phase 2\n");
  fs/jbd2/commit.c:       jbd_debug(3, "JBD2: commit phase 2\n");
  fs/jbd2/commit.c:       jbd_debug(3, "JBD2: commit phase 3\n");
  fs/jbd2/commit.c:       jbd_debug(3, "JBD2: commit phase 4\n");
  [...]

There is clearly a duplicate label for phase 2, and they are
both active (i.e. not in #if ... #else block).  Rename them to
be "2a" and "2b" so the debug output is unambiguous.

Signed-off-by: Paul Gortmaker 
Signed-off-by: "Theodore Ts'o"

jbd2: relocate assert after state lock in journal_commit_transaction()

2013-06-13T02:46:35+00:00

The state lock is taken after we are doing an assert on the state
value, not before.  So we might in fact be doing an assert on a
transient value.  Ensure the state check is within the scope of
the state lock being taken.

Signed-off-by: Paul Gortmaker 
Signed-off-by: "Theodore Ts'o"

jbd2: transaction reservation support

2013-06-04T16:35:11+00:00

In some cases we cannot start a transaction because of locking
constraints and passing started transaction into those places is not
handy either because we could block transaction commit for too long.
Transaction reservation is designed to solve these issues.  It
reserves a handle with given number of credits in the journal and the
handle can be later attached to the running transaction without
blocking on commit or checkpointing.  Reserved handles do not block
transaction commit in any way, they only reduce maximum size of the
running transaction (because we have to always be prepared to
accomodate request for attaching reserved handle).

Signed-off-by: Jan Kara 
Signed-off-by: "Theodore Ts'o"

jbd2: refine waiting for shadow buffers

2013-06-04T16:08:56+00:00

Currently when we add a buffer to a transaction, we wait until the
buffer is removed from BJ_Shadow list (so that we prevent any changes
to the buffer that is just written to the journal).  This can take
unnecessarily long as a lot happens between the time the buffer is
submitted to the journal and the time when we remove the buffer from
BJ_Shadow list.  (e.g.  We wait for all data buffers in the
transaction, we issue a cache flush, etc.)  Also this creates a
dependency of do_get_write_access() on transaction commit (namely
waiting for data IO to complete) which we want to avoid when
implementing transaction reservation.

So we modify commit code to set new BH_Shadow flag when temporary
shadowing buffer is created and we clear that flag once IO on that
buffer is complete.  This allows do_get_write_access() to wait only
for BH_Shadow bit and thus removes the dependency on data IO
completion.

Reviewed-by: Zheng Liu 
Signed-off-by: Jan Kara 
Signed-off-by: "Theodore Ts'o"

jbd2: remove journal_head from descriptor buffers

2013-06-04T16:06:01+00:00

Similarly as for metadata buffers, also log descriptor buffers don't
really need the journal head. So strip it and remove BJ_LogCtl list.

Reviewed-by: Zheng Liu 
Signed-off-by: Jan Kara 
Signed-off-by: "Theodore Ts'o"

jbd2: don't create journal_head for temporary journal buffers

2013-06-04T16:01:45+00:00

When writing metadata to the journal, we create temporary buffer heads
for that task.  We also attach journal heads to these buffer heads but
the only purpose of the journal heads is to keep buffers linked in
transaction's BJ_IO list.  We remove the need for journal heads by
reusing buffer_head's b_assoc_buffers list for that purpose.  Also
since BJ_IO list is just a temporary list for transaction commit, we
use a private list in jbd2_journal_commit_transaction() for that thus
removing BJ_IO list from transaction completely.

Reviewed-by: Zheng Liu 
Signed-off-by: Jan Kara 
Signed-off-by: "Theodore Ts'o"

jbd2: fix block tag checksum verification brokenness

2013-05-28T11:31:59+00:00

Al Viro complained of a ton of bogosity with regards to the jbd2 block
tag header checksum.  This one checksum is 16 bits, so cut off the
upper 16 bits and treat it as a 16-bit value and don't mess around
with be32* conversions.  Fortunately metadata checksumming is still
"experimental" and not in a shipping e2fsprogs, so there should be few
users affected by this.

Reported-by: Al Viro 
Signed-off-by: Darrick J. Wong