Pull VFS updates from Al Viro,

Misc cleanups all over the place, mainly wrt /proc interfaces (switch
create_proc_entry to proc_create(), get rid of the deprecated
create_proc_read_entry() in favor of using proc_create_data() and
seq_file etc).

7kloc removed.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits)
  don't bother with deferred freeing of fdtables
  proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h
  proc: Make the PROC_I() and PDE() macros internal to procfs
  proc: Supply a function to remove a proc entry by PDE
  take cgroup_open() and cpuset_open() to fs/proc/base.c
  ppc: Clean up scanlog
  ppc: Clean up rtas_flash driver somewhat
  hostap: proc: Use remove_proc_subtree()
  drm: proc: Use remove_proc_subtree()
  drm: proc: Use minor->index to label things, not PDE->name
  drm: Constify drm_proc_list[]
  zoran: Don't print proc_dir_entry data in debug
  reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show()
  proc: Supply an accessor for getting the data from a PDE's parent
  airo: Use remove_proc_subtree()
  rtl8192u: Don't need to save device proc dir PDE
  rtl8187se: Use a dir under /proc/net/r8180/
  proc: Add proc_mkdir_data()
  proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h}
  proc: Move PDE_NET() to fs/proc/proc_net.c
  ...

Pull ext4 updates from Ted Ts'o:
 "Mostly performance and bug fixes, plus some cleanups.  The one new
  feature this merge window is a new ioctl EXT4_IOC_SWAP_BOOT which
  allows installation of a hidden inode designed for boot loaders."

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (50 commits)
  ext4: fix type-widening bug in inode table readahead code
  ext4: add check for inodes_count overflow in new resize ioctl
  ext4: fix Kconfig documentation for CONFIG_EXT4_DEBUG
  ext4: fix online resizing for ext3-compat file systems
  jbd2: trace when lock_buffer in do_get_write_access takes a long time
  ext4: mark metadata blocks using bh flags
  buffer: add BH_Prio and BH_Meta flags
  ext4: mark all metadata I/O with REQ_META
  ext4: fix readdir error in case inline_data+^dir_index.
  ext4: fix readdir error in the case of inline_data+dir_index
  jbd2: use kmem_cache_zalloc instead of kmem_cache_alloc/memset
  ext4: mext_insert_extents should update extent block checksum
  ext4: move quota initialization out of inode allocation transaction
  ext4: reserve xattr index for Rich ACL support
  jbd2: reduce journal_head size
  ext4: clear buffer_uninit flag when submitting IO
  ext4: use io_end for multiple bios
  ext4: make ext4_bio_write_page() use BH_Async_Write flags
  ext4: Use kstrtoul() instead of parse_strtoul()
  ext4: defragmentation code cleanup
  ...

bh allocation uses kmem_cache_zalloc() so we needn't call
'init_buffer(bh, NULL, NULL)' and perform other set-zero-operations.

Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The only part of proc_dir_entry the code outside of fs/proc
really cares about is PDE(inode)->data.  Provide a helper
for that; static inline for now, eventually will be moved
to fs/proc, along with the knowledge of struct proc_dir_entry
layout.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

In the case where an inode has a very stale transaction id (tid) in
i_datasync_tid or i_sync_tid, it's possible that after a very large
(2**31) number of transactions, that the tid number space might wrap,
causing tid_geq()'s calculations to fail.

Commit deeeaf13 "jbd2: fix fsync() tid wraparound bug", later modified
by commit e7b04ac0 "jbd2: don't wake kjournald unnecessarily",
attempted to fix this problem, but it only avoided kjournald spinning
forever by fixing the logic in jbd2_log_start_commit().

Unfortunately, in the codepaths in fs/ext4/fsync.c and fs/ext4/inode.c
that might call jbd2_log_start_commit() with a stale tid, those
functions will subsequently call jbd2_log_wait_commit() with the same
stale tid, and then wait for a very long time.  To fix this, we
replace the calls to jbd2_log_start_commit() and
jbd2_log_wait_commit() with a call to a new function,
jbd2_complete_transaction(), which will correctly handle stale tid's.

As a bonus, jbd2_complete_transaction() will avoid locking
j_state_lock for writing unless a commit needs to be started.  This
should have a small (but probably not measurable) improvement for
ext4's scalability.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Reported-by: George Barnett <gbarnett@atlassian.com>
Cc: stable@vger.kernel.org

There are multiple reasons to move away from debugfs.  First of all,
we are only using it for a single parameter, and it is much more
complicated to set up (some 30 lines of code compared to 3), and one
more thing that might fail while loading the jbd2 module.

Secondly, as a module paramter it can be specified as a boot option if
jbd2 is built into the kernel, or as a parameter when the module is
loaded, and it can also be manipulated dynamically under
/sys/module/jbd2/parameters/jbd2_debug.  So it is more flexible.

Ultimately we want to move away from using jbd_debug() towards
tracepoints, but for now this is still a useful simplification of the
code base.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Track the delay between when we first request that the commit begin
and when it actually begins, so we can see how much of a gap exists.
In theory, this should just be the remaining scheduling quantuum of
the thread which requested the commit (assuming it was not a
synchronous operation which triggered the commit request) plus
scheduling overhead; however, it's possible that real time processes
might get in the way of letting the kjournald thread from executing.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Don't send an extra wakeup to kjournald in the case where we
already have the proper target in j_commit_request, i.e. that
transaction has already been requested for commit.

commit deeeaf13 "jbd2: fix fsync() tid wraparound bug" changed
the logic leading to a wakeup, but it caused some extra wakeups
which were found to lead to a measurable performance regression.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
[tytso@mit.edu: reworked check to make it clearer]
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4_handle_release_buffer() was intended to remove journal
write access from a buffer, but it doesn't actually do anything
at all other than add a BUFFER_TRACE point, but it's not reliably
used for that either.  Remove all the associated dead code.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>

Pull ext4 updates from Ted Ts'o:
 "The big new feature added this time is supporting online resizing
  using the meta_bg feature.  This allows us to resize file systems
  which are greater than 16TB.  In addition, the speed of online
  resizing has been improved in general.

  We also fix a number of races, some of which could lead to deadlocks,
  in ext4's Asynchronous I/O and online defrag support, thanks to good
  work by Dmitry Monakhov.

  There are also a large number of more minor bug fixes and cleanups
  from a number of other ext4 contributors, quite of few of which have
  submitted fixes for the first time."

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (69 commits)
  ext4: fix ext4_flush_completed_IO wait semantics
  ext4: fix mtime update in nodelalloc mode
  ext4: fix ext_remove_space for punch_hole case
  ext4: punch_hole should wait for DIO writers
  ext4: serialize truncate with owerwrite DIO workers
  ext4: endless truncate due to nonlocked dio readers
  ext4: serialize unlocked dio reads with truncate
  ext4: serialize dio nonlocked reads with defrag workers
  ext4: completed_io locking cleanup
  ext4: fix unwritten counter leakage
  ext4: give i_aiodio_unwritten a more appropriate name
  ext4: ext4_inode_info diet
  ext4: convert to use leXX_add_cpu()
  ext4: ext4_bread usage audit
  fs: reserve fallocate flag codepoint
  ext4: remove redundant offset check in mext_check_arguments()
  ext4: don't clear orphan list on ro mount with errors
  jbd2: fix assertion failure in commit code due to lacking transaction credits
  ext4: release donor reference when EXT4_IOC_MOVE_EXT ioctl fails
  ext4: enable FITRIM ioctl on bigalloc file system
  ...