linux-toradex.git/fs/jbd2, branch v3.10.94

jbd2: fix ocfs2 corrupt when updating journal superblock fails

2015-08-03T16:29:43+00:00

commit 6f6a6fda294506dfe0e3e0a253bb2d2923f28f0a upstream.

If updating journal superblock fails after journal data has been
flushed, the error is omitted and this will mislead the caller as a
normal case.  In ocfs2, the checkpoint will be treated successfully
and the other node can get the lock to update. Since the sb_start is
still pointing to the old log block, it will rewrite the journal data
during journal recovery by the other node. Thus the new updates will
be overwritten and ocfs2 corrupts.  So in above case we have to return
the error, and ocfs2_commit_cache will take care of the error and
prevent the other node to do update first.  And only after recovering
journal it can do the new updates.

The issue discussion mail can be found at:
https://oss.oracle.com/pipermail/ocfs2-devel/2015-June/010856.html
http://comments.gmane.org/gmane.comp.file-systems.ext4/48841

[ Fixed bug in patch which allowed a non-negative error return from
  jbd2_cleanup_journal_tail() to leak out of jbd2_fjournal_flush(); this
  was causing xfstests ext4/306 to fail. -- Ted ]

Reported-by: Yiwen Jiang 
Signed-off-by: Joseph Qi 
Signed-off-by: Theodore Ts'o 
Tested-by: Yiwen Jiang 
Cc: Junxiao Bi 
Signed-off-by: Greg Kroah-Hartman

jbd2: use GFP_NOFS in jbd2_cleanup_journal_tail()

2015-08-03T16:29:43+00:00

commit b4f1afcd068f6e533230dfed00782cd8a907f96b upstream.

jbd2_cleanup_journal_tail() can be invoked by jbd2__journal_start()
So allocations should be done with GFP_NOFS

[Full stack trace snipped from 3.10-rh7]
[] dump_stack+0x19/0x1b
[] warn_slowpath_common+0x61/0x80
[] warn_slowpath_null+0x1a/0x20
[] slab_pre_alloc_hook.isra.31.part.32+0x15/0x17
[] kmem_cache_alloc+0x55/0x210
[] ? mempool_alloc_slab+0x15/0x20
[] mempool_alloc_slab+0x15/0x20
[] mempool_alloc+0x69/0x170
[] ? _raw_spin_unlock_irq+0xe/0x20
[] ? finish_task_switch+0x5d/0x150
[] bio_alloc_bioset+0x1be/0x2e0
[] blkdev_issue_flush+0x99/0x120
[] jbd2_cleanup_journal_tail+0x93/0xa0 [jbd2] -->GFP_KERNEL
[] jbd2_log_do_checkpoint+0x221/0x4a0 [jbd2]
[] __jbd2_log_wait_for_space+0xa7/0x1e0 [jbd2]
[] start_this_handle+0x2d8/0x550 [jbd2]
[] ? __memcg_kmem_put_cache+0x29/0x30
[] ? kmem_cache_alloc+0x130/0x210
[] jbd2__journal_start+0xba/0x190 [jbd2]
[] ? lru_cache_add+0xe/0x10
[] ? ext4_da_write_begin+0xf9/0x330 [ext4]
[] __ext4_journal_start_sb+0x77/0x160 [ext4]
[] ext4_da_write_begin+0xf9/0x330 [ext4]
[] generic_file_buffered_write_iter+0x10c/0x270
[] __generic_file_write_iter+0x178/0x390
[] __generic_file_aio_write+0x8b/0xb0
[] generic_file_aio_write+0x5d/0xc0
[] ext4_file_write+0xa9/0x450 [ext4]
[] ? pipe_read+0x379/0x4f0
[] do_sync_write+0x90/0xe0
[] vfs_write+0xbd/0x1e0
[] SyS_write+0x58/0xb0
[] system_call_fastpath+0x16/0x1b

Signed-off-by: Dmitry Monakhov 
Signed-off-by: Theodore Ts'o 
Signed-off-by: Greg Kroah-Hartman

jbd2: free bh when descriptor block checksum fails

2014-11-14T16:47:57+00:00

commit 064d83892e9ba547f7d4eae22cbca066d95210ce upstream.

Free the buffer head if the journal descriptor block fails checksum
verification.

This is the jbd2 port of the e2fsprogs patch "e2fsck: free bh on csum
verify error in do_one_pass".

Signed-off-by: Darrick J. Wong 
Signed-off-by: Theodore Ts'o 
Reviewed-by: Eric Sandeen 
Signed-off-by: Greg Kroah-Hartman

jbd2: fix infinite loop when recovering corrupt journal blocks

2014-09-05T23:28:36+00:00

commit 022eaa7517017efe4f6538750c2b59a804dc7df7 upstream.

When recovering the journal, don't fall into an infinite loop if we
encounter a corrupt journal block.  Instead, just skip the block and
return an error, which fails the mount and thus forces the user to run
a full filesystem fsck.

Signed-off-by: Darrick J. Wong 
Signed-off-by: Theodore Ts'o 
Signed-off-by: Greg Kroah-Hartman

ext4: disable synchronous transaction batching if max_batch_time==0

2014-07-17T22:58:03+00:00

commit 5dd214248f94d430d70e9230bda72f2654ac88a8 upstream.

The mount manpage says of the max_batch_time option,

	This optimization can be turned off entirely
	by setting max_batch_time to 0.

But the code doesn't do that.  So fix the code to do
that.

Signed-off-by: Eric Sandeen 
Signed-off-by: Theodore Ts'o 
Signed-off-by: Greg Kroah-Hartman

jbd2: don't BUG but return ENOSPC if a handle runs out of space

2014-01-09T20:24:24+00:00

commit f6c07cad081ba222d63623d913aafba5586c1d2c upstream.

If a handle runs out of space, we currently stop the kernel with a BUG
in jbd2_journal_dirty_metadata().  This makes it hard to figure out
what might be going on.  So return an error of ENOSPC, so we can let
the file system layer figure out what is going on, to make it more
likely we can get useful debugging information).  This should make it
easier to debug problems such as the one which was reported by:

    https://bugzilla.kernel.org/show_bug.cgi?id=44731

The only two callers of this function are ext4_handle_dirty_metadata()
and ocfs2_journal_dirty().  The ocfs2 function will trigger a
BUG_ON(), which means there will be no change in behavior.  The ext4
function will call ext4_error_inode() which will print the useful
debugging information and then handle the situation using ext4's error
handling mechanisms (i.e., which might mean halting the kernel or
remounting the file system read-only).

Also, since both file systems already call WARN_ON(), drop the WARN_ON
from jbd2_journal_dirty_metadata() to avoid two stack traces from
being displayed.

Signed-off-by: "Theodore Ts'o" 
Cc: ocfs2-devel@oss.oracle.com
Acked-by: Joel Becker 
Signed-off-by: Greg Kroah-Hartman

jbd2: fix theoretical race in jbd2__journal_restart

2013-07-22T01:21:22+00:00

commit 39c04153fda8c32e85b51c96eb5511a326ad7609 upstream.

Once we decrement transaction->t_updates, if this is the last handle
holding the transaction from closing, and once we release the
t_handle_lock spinlock, it's possible for the transaction to commit
and be released.  In practice with normal kernels, this probably won't
happen, since the commit happens in a separate kernel thread and it's
unlikely this could all happen within the space of a few CPU cycles.

On the other hand, with a real-time kernel, this could potentially
happen, so save the tid found in transaction->t_tid before we release
t_handle_lock.  It would require an insane configuration, such as one
where the jbd2 thread was set to a very high real-time priority,
perhaps because a high priority real-time thread is trying to read or
write to a file system.  But some people who use real-time kernels
have been known to do insane things, including controlling
laser-wielding industrial robots.  :-)

Signed-off-by: "Theodore Ts'o" 
Signed-off-by: Greg Kroah-Hartman

jbd2: move superblock checksum calculation to jbd2_write_superblock()

2013-07-22T01:21:22+00:00

commit fe52d17cdd343ac43c85cf72940a58865b9d3bfb upstream.

Some of the functions which modify the jbd2 superblock were not
updating the checksum before calling jbd2_write_superblock().  Move
the call to jbd2_superblock_csum_set() to jbd2_write_superblock(), so
that the checksum is calculated consistently.

Signed-off-by: "Theodore Ts'o" 
Cc: Darrick J. Wong 
Signed-off-by: Greg Kroah-Hartman

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2013-05-02T00:51:54+00:00

Pull VFS updates from Al Viro,

Misc cleanups all over the place, mainly wrt /proc interfaces (switch
create_proc_entry to proc_create(), get rid of the deprecated
create_proc_read_entry() in favor of using proc_create_data() and
seq_file etc).

7kloc removed.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits)
  don't bother with deferred freeing of fdtables
  proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h
  proc: Make the PROC_I() and PDE() macros internal to procfs
  proc: Supply a function to remove a proc entry by PDE
  take cgroup_open() and cpuset_open() to fs/proc/base.c
  ppc: Clean up scanlog
  ppc: Clean up rtas_flash driver somewhat
  hostap: proc: Use remove_proc_subtree()
  drm: proc: Use remove_proc_subtree()
  drm: proc: Use minor->index to label things, not PDE->name
  drm: Constify drm_proc_list[]
  zoran: Don't print proc_dir_entry data in debug
  reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show()
  proc: Supply an accessor for getting the data from a PDE's parent
  airo: Use remove_proc_subtree()
  rtl8192u: Don't need to save device proc dir PDE
  rtl8187se: Use a dir under /proc/net/r8180/
  proc: Add proc_mkdir_data()
  proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h}
  proc: Move PDE_NET() to fs/proc/proc_net.c
  ...

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

2013-05-01T15:04:12+00:00

Pull ext4 updates from Ted Ts'o:
 "Mostly performance and bug fixes, plus some cleanups.  The one new
  feature this merge window is a new ioctl EXT4_IOC_SWAP_BOOT which
  allows installation of a hidden inode designed for boot loaders."

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (50 commits)
  ext4: fix type-widening bug in inode table readahead code
  ext4: add check for inodes_count overflow in new resize ioctl
  ext4: fix Kconfig documentation for CONFIG_EXT4_DEBUG
  ext4: fix online resizing for ext3-compat file systems
  jbd2: trace when lock_buffer in do_get_write_access takes a long time
  ext4: mark metadata blocks using bh flags
  buffer: add BH_Prio and BH_Meta flags
  ext4: mark all metadata I/O with REQ_META
  ext4: fix readdir error in case inline_data+^dir_index.
  ext4: fix readdir error in the case of inline_data+dir_index
  jbd2: use kmem_cache_zalloc instead of kmem_cache_alloc/memset
  ext4: mext_insert_extents should update extent block checksum
  ext4: move quota initialization out of inode allocation transaction
  ext4: reserve xattr index for Rich ACL support
  jbd2: reduce journal_head size
  ext4: clear buffer_uninit flag when submitting IO
  ext4: use io_end for multiple bios
  ext4: make ext4_bio_write_page() use BH_Async_Write flags
  ext4: Use kstrtoul() instead of parse_strtoul()
  ext4: defragmentation code cleanup
  ...