linux-toradex.git/fs/nfs, branch v3.2.48

NFS: nfs_getaclargs.acl_len is a size_t

2013-04-10T02:20:09+00:00

commit 56d08fef2369d5ca9ad2e1fc697f5379fd8af751 upstream.

Squelch compiler warnings:

fs/nfs/nfs4proc.c: In function ‘__nfs4_get_acl_uncached’:
fs/nfs/nfs4proc.c:3811:14: warning: comparison between signed and
	unsigned integer expressions [-Wsign-compare]
fs/nfs/nfs4proc.c:3818:15: warning: comparison between signed and
	unsigned integer expressions [-Wsign-compare]

Introduced by commit bf118a34 "NFSv4: include bitmap in nfsv4 get
acl data", Dec 7, 2011.

Signed-off-by: Chuck Lever 
Signed-off-by: Trond Myklebust 
Signed-off-by: Ben Hutchings

NFSv4.1: Fix a race in pNFS layoutcommit

2013-04-10T02:20:01+00:00

commit a073dbff359f4741013ae4b8395f5364c5e00b48 upstream.

We need to clear the NFS_LSEG_LAYOUTCOMMIT bits atomically with the
NFS_INO_LAYOUTCOMMIT bit, otherwise we may end up with situations
where the two are out of sync.
The first half of the problem is to ensure that pnfs_layoutcommit_inode
clears the NFS_LSEG_LAYOUTCOMMIT bit through pnfs_list_write_lseg.
We still need to keep the reference to those segments until the RPC call
is finished, so in order to make it clear _where_ those references come
from, we add a helper pnfs_list_write_lseg_done() that cleans up after
pnfs_list_write_lseg.

Signed-off-by: Trond Myklebust 
Acked-by: Benny Halevy 
[bwh: Backported to 3.2: s/pnfs_put_lseg/put_lseg/]
Signed-off-by: Ben Hutchings

pnfs-block: removing DM device maybe cause oops when call dev_remove

2013-04-10T02:20:01+00:00

commit 4376c94618c26225e69e17b7c91169c45a90b292 upstream.

when pnfs block using device mapper,if umounting later,it maybe
cause oops. we apply "1 + sizeof(bl_umount_request)" memory for
msg->data, the memory maybe overflow when we do "memcpy(&dataptr
[sizeof(bl_msg)], &bl_umount_request, sizeof(bl_umount_request))",
because the size of bl_msg is more than 1 byte.

Signed-off-by: fanchaoting
Signed-off-by: Trond Myklebust 
[bwh: Backported to 3.2:
 - In dev_remove(), msg is a structure not a pointer to it]
Signed-off-by: Ben Hutchings

NFS: Don't allow NFS silly-renamed files to be deleted, no signal

2013-03-20T15:03:16+00:00

commit 5a7a613a47a715711b3f2d3322a0eac21d459166 upstream.

Commit 73ca100 broke the code that prevents the client from deleting
a silly renamed dentry.  This affected "delete on last close"
semantics as after that commit, nothing prevented removal of
silly-renamed files.  As a result, a process holding a file open
could easily get an ESTALE on the file in a directory where some
other process issued 'rm -rf some_dir_containing_the_file' twice.
Before the commit, any attempt at unlinking silly renamed files would
fail inside may_delete() with -EBUSY because of the
DCACHE_NFSFS_RENAMED flag.  The following testcase demonstrates
the problem:
  tail -f /nfsmnt/dir/file &
  rm -rf /nfsmnt/dir
  rm -rf /nfsmnt/dir
  # second removal does not fail, 'tail' process receives ESTALE

The problem with the above commit is that it unhashes the old and
new dentries from the lookup path, even in the normal case when
a signal is not encountered and it would have been safe to call
d_move.  Unfortunately the old dentry has the special
DCACHE_NFSFS_RENAMED flag set on it.  Unhashing has the
side-effect that future lookups call d_alloc(), allocating a new
dentry without the special flag for any silly-renamed files.  As a
result, subsequent calls to unlink silly renamed files do not fail
but allow the removal to go through.  This will result in ESTALE
errors for any other process doing operations on the file.

To fix this, go back to using d_move on success.
For the signal case, it's unclear what we may safely do beyond d_drop.

Reported-by: Dave Wysochanski 
Signed-off-by: Trond Myklebust 
Acked-by: Jeff Layton 
Signed-off-by: Ben Hutchings

umount oops when remove blocklayoutdriver first

2013-03-06T03:24:02+00:00

commit 5a12cca697aca5dfba42a7d4c3356acc0445a2b0 upstream.

now pnfs client uses block layout, maybe we can remove
blocklayoutdriver first. if we umount later,
it can cause oops in unset_pnfs_layoutdriver.
because nfss->pnfs_curr_ld->clear_layoutdriver is invalid.

reproduce it:
 modprobe  blocklayoutdriver
 mount -t nfs4 -o minorversion=1 pnfsip:/ /mnt/
 rmmod blocklayoutdriver
 umount /mnt

then you can see following

CPU 0
Pid: 17023, comm: umount.nfs4 Tainted: GF          O 3.7.0-rc6-pnfs #1 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform
RIP: 0010:[]  [] unset_pnfs_layoutdriver+0x1d/0x70 [nfsv4]
RSP: 0018:ffff8800022d9e48  EFLAGS: 00010286
RAX: ffffffffa04a1b00 RBX: ffff88000b013800 RCX: 0000000000000001
RDX: ffffffff81ae8ee0 RSI: ffff880001ee94b8 RDI: ffff88000b013800
RBP: ffff8800022d9e58 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff880001ee9400
R13: ffff8800105978c0 R14: 00007fff25846c08 R15: 0000000001bba550
FS:  00007f45ae7f0700(0000) GS:ffff880012c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffffffffa04a1b38 CR3: 0000000002c0c000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process umount.nfs4 (pid: 17023, threadinfo ffff8800022d8000, task ffff880006e48aa0)
Stack:
ffff8800105978c0 ffff88000b013800 ffff8800022d9e78 ffffffffa04cd0ce
ffff8800022d9e78 ffff88000b013800 ffff8800022d9ea8 ffffffffa04755a7
ffff8800022d9ea8 ffff880002f96400 ffff88000b013800 ffff880002f96400
Call Trace:
[] nfs4_destroy_server+0x1e/0x30 [nfsv4]
[] nfs_free_server+0xb7/0x150 [nfs]
[] nfs_kill_super+0x35/0x40 [nfs]
[] deactivate_locked_super+0x45/0x70
[] deactivate_super+0x4a/0x70
[] mntput_no_expire+0xd2/0x130
[] sys_umount+0x72/0xe0
[] system_call_fastpath+0x16/0x1b
Code: 06 e1 b8 ea ff ff ff eb 9e 0f 1f 44 00 00 55 48 89 e5 53 48 83 ec 08 66 66 66 66 90 48 8b 87 80 03 00 00 48 89 fb 48 85 c0 74 29 <48> 8b 40 38 48 85 c0 74 02 ff d0 48 8b 03 3e ff 48 04 0f 94 c2
RIP  [] unset_pnfs_layoutdriver+0x1d/0x70 [nfsv4]
RSP 
CR2: ffffffffa04a1b38
---[ end trace 29f75aaedda058bf ]---

Signed-off-by: fanchaoting
Signed-off-by: Trond Myklebust 
Signed-off-by: Ben Hutchings

NFSv4.1: Don't decode skipped layoutgets

2013-03-06T03:24:01+00:00

commit 085b7a45c63d3da5be155faab9249a5cab224561 upstream.

layoutget's prepare hook can call rpc_exit with status = NFS4_OK (0).
Because of this, nfs4_proc_layoutget can't depend on a 0 status to mean
that the RPC was successfully sent, received and parsed.

To fix this, use the result's len member to see if parsing took place.

This fixes the following OOPS -- calling xdr_init_decode() with a buffer length
0 doesn't set the stream's 'p' member and ends up using uninitialized memory
in filelayout_decode_layout.

BUG: unable to handle kernel paging request at 0000000000008050
IP: [] memcpy+0x18/0x120
PGD 0
Oops: 0000 [#1] SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:11.0/0000:02:01.0/irq
CPU 1
Modules linked in: nfs_layout_nfsv41_files nfs lockd fscache auth_rpcgss nfs_acl autofs4 sunrpc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 dm_mirror dm_region_hash dm_log dm_mod ppdev parport_pc parport snd_ens1371 snd_rawmidi snd_ac97_codec ac97_bus snd_seq snd_seq_device snd_pcm snd_timer snd soundcore snd_page_alloc e1000 microcode vmware_balloon i2c_piix4 i2c_core sg shpchp ext4 mbcache jbd2 sr_mod cdrom sd_mod crc_t10dif pata_acpi ata_generic ata_piix mptspi mptscsih mptbase scsi_transport_spi [last unloaded: speedstep_lib]

Pid: 1665, comm: flush-0:22 Not tainted 2.6.32-356-test-2 #2 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform
RIP: 0010:[]  [] memcpy+0x18/0x120
RSP: 0018:ffff88003dfab588  EFLAGS: 00010206
RAX: ffff88003dc42000 RBX: ffff88003dfab610 RCX: 0000000000000009
RDX: 000000003f807ff0 RSI: 0000000000008050 RDI: ffff88003dc42000
RBP: ffff88003dfab5b0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000080 R12: 0000000000000024
R13: ffff88003dc42000 R14: ffff88003f808030 R15: ffff88003dfab6a0
FS:  0000000000000000(0000) GS:ffff880003420000(0000) knlGS:0000000000000000
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000008050 CR3: 000000003bc92000 CR4: 00000000001407e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process flush-0:22 (pid: 1665, threadinfo ffff88003dfaa000, task ffff880037f77540)
Stack:
ffffffffa0398ac1 ffff8800397c5940 ffff88003dfab610 ffff88003dfab6a0
 ffff88003dfab5d0 ffff88003dfab680 ffffffffa01c150b ffffea0000d82e70
 000000508116713b 0000000000000000 0000000000000000 0000000000000000
Call Trace:
[] ? xdr_inline_decode+0xb1/0x120 [sunrpc]
[] filelayout_decode_layout+0xeb/0x350 [nfs_layout_nfsv41_files]
[] filelayout_alloc_lseg+0x8c/0x3c0 [nfs_layout_nfsv41_files]
[] ? __wait_on_bit+0x7e/0x90

Signed-off-by: Weston Andros Adamson 
Signed-off-by: Trond Myklebust 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

NFSv4.1: Handle NFS4ERR_DELAY when resetting the NFSv4.1 session

2013-02-06T04:33:51+00:00

commit c489ee290bdbbace6bb63ebe6ebd4dd605819495 upstream.

NFS4ERR_DELAY is a legal reply when we call DESTROY_SESSION. It
usually means that the server is busy handling an unfinished RPC
request. Just sleep for a second and then retry.
We also need to be able to handle the NFS4ERR_BACK_CHAN_BUSY return
value. If the NFS server has outstanding callbacks, we just want to
similarly sleep & retry.

Signed-off-by: Trond Myklebust 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

NFS: Don't silently fail setattr() requests on mountpoints

2013-02-06T04:33:51+00:00

commit ab225417825963b6dc66be7ea80f94ac1378dfdf upstream.

Ensure that any setattr and getattr requests for junctions and/or
mountpoints are sent to the server. Ever since commit
0ec26fd0698 (vfs: automount should ignore LOOKUP_FOLLOW), we have
silently dropped any setattr requests to a server-side mountpoint.
For referrals, we have silently dropped both getattr and setattr
requests.

This patch restores the original behaviour for setattr on mountpoints,
and tries to do the same for referrals, provided that we have a
filehandle...

Signed-off-by: Trond Myklebust 
Signed-off-by: Ben Hutchings

nfs: fix null checking in nfs_get_option_str()

2013-01-16T01:13:19+00:00

commit e25fbe380c4e3c09afa98bcdcd9d3921443adab8 upstream.

The following null pointer check is broken.

	*option = match_strdup(args);
	return !option;

The pointer `option' must be non-null, and thus `!option' is always false.
Use `!*option' instead.

The bug was introduced in commit c5cb09b6f8 ("Cleanup: Factor out some
cut-and-paste code.").

Signed-off-by: Xi Wang 
Signed-off-by: Trond Myklebust 
Signed-off-by: Ben Hutchings

NFS: avoid NULL dereference in nfs_destroy_server

2013-01-03T03:33:38+00:00

commit f259613a1e4b44a0cf85a5dafd931be96ee7c9e5 upstream.

In rare circumstances, nfs_clone_server() of a v2 or v3 server can get
an error between setting server->destory (to nfs_destroy_server), and
calling nfs_start_lockd (which will set server->nlm_host).

If this happens, nfs_clone_server will call nfs_free_server which
will call nfs_destroy_server and thence nlmclnt_done(NULL).  This
causes the NULL to be dereferenced.

So add a guard to only call nlmclnt_done() if ->nlm_host is not NULL.

The other guards there are irrelevant as nlm_host can only be non-NULL
if one of these flags are set - so remove those tests.  (Thanks to Trond
for this suggestion).

This is suitable for any stable kernel since 2.6.25.

Signed-off-by: NeilBrown 
Signed-off-by: Trond Myklebust 
Signed-off-by: Ben Hutchings