linux-toradex.git/fs/nilfs2, branch toradex_vf_4.1

fs: Give dentry to inode_change_ok() instead of inode

2016-12-23T13:56:35+00:00

[ Upstream commit 31051c85b5e2aaaf6315f74c72a732673632a905 ]

inode_change_ok() will be resposible for clearing capabilities and IMA
extended attributes and as such will need dentry. Give it as an argument
to inode_change_ok() instead of an inode. Also rename inode_change_ok()
to setattr_prepare() to better relect that it does also some
modifications in addition to checks.

References: CVE-2015-1350
Reviewed-by: Christoph Hellwig 
Signed-off-by: Jan Kara 
Signed-off-by: Philipp Hahn 
Signed-off-by: Sasha Levin

fs/nilfs2: fix potential underflow in call to crc32_le

2016-07-11T02:27:11+00:00

[ Upstream commit 63d2f95d63396059200c391ca87161897b99e74a ]

The value `bytes' comes from the filesystem which is about to be
mounted.  We cannot trust that the value is always in the range we
expect it to be.

Check its value before using it to calculate the length for the crc32_le
call.  It value must be larger (or equal) sumoff + 4.

This fixes a kernel bug when accidentially mounting an image file which
had the nilfs2 magic value 0x3434 at the right offset 0x406 by chance.
The bytes 0x01 0x00 were stored at 0x408 and were interpreted as a
s_bytes value of 1.  This caused an underflow when substracting sumoff +
4 (20) in the call to crc32_le.

  BUG: unable to handle kernel paging request at ffff88021e600000
  IP:  crc32_le+0x36/0x100
  ...
  Call Trace:
    nilfs_valid_sb.part.5+0x52/0x60 [nilfs2]
    nilfs_load_super_block+0x142/0x300 [nilfs2]
    init_nilfs+0x60/0x390 [nilfs2]
    nilfs_mount+0x302/0x520 [nilfs2]
    mount_fs+0x38/0x160
    vfs_kern_mount+0x67/0x110
    do_mount+0x269/0xe00
    SyS_mount+0x9f/0x100
    entry_SYSCALL_64_fastpath+0x16/0x71

Link: http://lkml.kernel.org/r/1466778587-5184-2-git-send-email-konishi.ryusuke@lab.ntt.co.jp
Signed-off-by: Torsten Hilbrich 
Tested-by: Torsten Hilbrich 
Signed-off-by: Ryusuke Konishi 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin

nilfs2: fix sanity check of btree level in nilfs_btree_root_broken()

2015-05-06T00:10:11+00:00

The range check for b-tree level parameter in nilfs_btree_root_broken()
is wrong; it accepts the case of "level == NILFS_BTREE_LEVEL_MAX" even
though the level is limited to values in the range of 0 to
(NILFS_BTREE_LEVEL_MAX - 1).

Since the level parameter is read from storage device and used to index
nilfs_btree_path array whose element count is NILFS_BTREE_LEVEL_MAX, it
can cause memory overrun during btree operations if the boundary value
is set to the level parameter on device.

This fixes the broken sanity check and adds a comment to clarify that
the upper bound NILFS_BTREE_LEVEL_MAX is exclusive.

Signed-off-by: Ryusuke Konishi 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2015-04-27T00:22:07+00:00

Pull fourth vfs update from Al Viro:
 "d_inode() annotations from David Howells (sat in for-next since before
  the beginning of merge window) + four assorted fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  RCU pathwalk breakage when running into a symlink overmounting something
  fix I_DIO_WAKEUP definition
  direct-io: only inc/dec inode->i_dio_count for file systems
  fs/9p: fix readdir()
  VFS: assorted d_backing_inode() annotations
  VFS: fs/inode.c helpers: d_inode() annotations
  VFS: fs/cachefiles: d_backing_inode() annotations
  VFS: fs library helpers: d_inode() annotations
  VFS: assorted weird filesystems: d_inode() annotations
  VFS: normal filesystems (and lustre): d_inode() annotations
  VFS: security/: d_inode() annotations
  VFS: security/: d_backing_inode() annotations
  VFS: net/: d_inode() annotations
  VFS: net/unix: d_backing_inode() annotations
  VFS: kernel/: d_inode() annotations
  VFS: audit: d_backing_inode() annotations
  VFS: Fix up some ->d_inode accesses in the chelsio driver
  VFS: Cachefiles should perform fs modifications on the top layer only
  VFS: AF_UNIX sockets should call mknod on the top layer only

Merge branch 'akpm' (patches from Andrew)

2015-04-17T13:04:38+00:00

Merge third patchbomb from Andrew Morton:

 - various misc things

 - a couple of lib/ optimisations

 - provide DIV_ROUND_CLOSEST_ULL()

 - checkpatch updates

 - rtc tree

 - befs, nilfs2, hfs, hfsplus, fatfs, adfs, affs, bfs

 - ptrace fixes

 - fork() fixes

 - seccomp cleanups

 - more mmap_sem hold time reductions from Davidlohr

* emailed patches from Andrew Morton : (138 commits)
  proc: show locks in /proc/pid/fdinfo/X
  docs: add missing and new /proc/PID/status file entries, fix typos
  drivers/rtc/rtc-at91rm9200.c: make IO endian agnostic
  Documentation/spi/spidev_test.c: fix warning
  drivers/rtc/rtc-s5m.c: allow usage on device type different than main MFD type
  .gitignore: ignore *.tar
  MAINTAINERS: add Mediatek SoC mailing list
  tomoyo: reduce mmap_sem hold for mm->exe_file
  powerpc/oprofile: reduce mmap_sem hold for exe_file
  oprofile: reduce mmap_sem hold for mm->exe_file
  mips: ip32: add platform data hooks to use DS1685 driver
  lib/Kconfig: fix up HAVE_ARCH_BITREVERSE help text
  x86: switch to using asm-generic for seccomp.h
  sparc: switch to using asm-generic for seccomp.h
  powerpc: switch to using asm-generic for seccomp.h
  parisc: switch to using asm-generic for seccomp.h
  mips: switch to using asm-generic for seccomp.h
  microblaze: use asm-generic for seccomp.h
  arm: use asm-generic for seccomp.h
  seccomp: allow COMPAT sigreturn overrides
  ...

nilfs2: use inode_set_flags() in nilfs_set_inode_flags()

2015-04-17T13:04:04+00:00

Use inode_set_flags() to atomically set i_flags instead of clearing out
the S_IMMUTABLE, S_APPEND, etc.  flags and then setting them from the
FS_IMMUTABLE_FL, FS_APPEND_FL flags to avoid a race where an immutable
file has the immutable flag cleared for a brief window of time.

This is a similar fix to commit 5f16f3225b06 ("ext4: atomically set
inode->i_flags in ext4_set_inode_flags()").

Signed-off-by: Ryusuke Konishi 
Cc: "Theodore Ts'o" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

nilfs2: put out gfp mask manipulation from nilfs_set_inode_flags()

2015-04-17T13:04:04+00:00

nilfs_set_inode_flags() function adjusts gfp-mask of inode->i_mapping as
well as i_flags, however, this coupling of operations is not appropriate.

For instance, nilfs_ioctl_setflags(), one of three callers of
nilfs_set_inode_flags(), doesn't need to reinitialize the gfp-mask at all.
 In addition, nilfs_new_inode(), another caller of
nilfs_set_inode_flags(), doesn't either because it has already initialized
the gfp-mask.

Only __nilfs_read_inode(), the remaining caller, needs it.  So, this moves
the gfp mask manipulation to __nilfs_read_inode() from
nilfs_set_inode_flags().

Signed-off-by: Ryusuke Konishi 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

nilfs2: fix gcc warning at nilfs_checkpoint_is_mounted()

2015-04-17T13:04:04+00:00

Fix the following build warning:

 fs/nilfs2/super.c: In function 'nilfs_checkpoint_is_mounted':
 fs/nilfs2/super.c:1023:10: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
   if (cno < 0 || cno > nilfs->ns_cno)
           ^

This warning indicates that the comparision "cno < 0" is useless because
variable "cno" has an unsigned integer type "__u64".

Signed-off-by: Ryusuke Konishi 
Reported-by: David Binderman 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

nilfs2: improve execution time of NILFS_IOCTL_GET_CPINFO ioctl

2015-04-17T13:04:04+00:00

The older a filesystem gets, the slower lscp command becomes.  This is
because nilfs_cpfile_do_get_cpinfo() function meets more hole blocks
as the start offset of valid checkpoint numbers gets bigger.

This reduces the overhead by skipping hole blocks efficiently with
nilfs_mdt_find_block() helper.

A measurement result of this patch is as follows:

Before:
$ time lscp
                 CNO        DATE     TIME  MODE  FLG      BLKCNT       ICNT
             5769303  2015-02-22 19:31:33   cp    -          108          1
             5769304  2015-02-22 19:38:54   cp    -          108          1

real    0m0.182s
user    0m0.003s
sys     0m0.180s

After:
$ time lscp
                 CNO        DATE     TIME  MODE  FLG      BLKCNT       ICNT
             5769303  2015-02-22 19:31:33   cp    -          108          1
             5769304  2015-02-22 19:38:54   cp    -          108          1

real    0m0.003s
user    0m0.001s
sys     0m0.002s

Signed-off-by: Ryusuke Konishi 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

nilfs2: add helper to find existent block on metadata file

2015-04-17T13:04:04+00:00

Add a new metadata file function, nilfs_mdt_find_block(), which finds
an existent block on a metadata file in a given range of blocks.  This
function skips continuous hole blocks efficiently by using
nilfs_bmap_seek_key().

Signed-off-by: Ryusuke Konishi 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds