linux-toradex.git/fs/nilfs2, branch v3.10.2

nilfs2: fix issue of nilfs_set_page_dirty() for page at EOF boundary

2013-05-24T23:22:52+00:00

nilfs2: fix issue of nilfs_set_page_dirty for page at EOF boundary

DESCRIPTION:
 There are use-cases when NILFS2 file system (formatted with block size
lesser than 4 KB) can be remounted in RO mode because of encountering of
"broken bmap" issue.

The issue was reported by Anthony Doggett :
 "The machine I've been trialling nilfs on is running Debian Testing,
  Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc
  version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2), but I've
  also reproduced it (identically) with Debian Unstable amd64 and Debian
  Experimental (using the 3.8-trunk kernel).  The problematic partitions
  were formatted with "mkfs.nilfs2 -b 1024 -B 8192"."

SYMPTOMS:
(1) System log contains error messages likewise:

    [63102.496756] nilfs_direct_assign: invalid pointer: 0
    [63102.496786] NILFS error (device dm-17): nilfs_bmap_assign: broken bmap (inode number=28)
    [63102.496798]
    [63102.524403] Remounting filesystem read-only

(2) The NILFS2 file system is remounted in RO mode.

REPRODUSING PATH:
(1) Create volume group with name "unencrypted" by means of vgcreate utility.
(2) Run script (prepared by Anthony Doggett ):

----------------[BEGIN SCRIPT]--------------------

VG=unencrypted
lvcreate --size 2G --name ntest $VG
mkfs.nilfs2 -b 1024 -B 8192 /dev/mapper/$VG-ntest
mkdir /var/tmp/n
mkdir /var/tmp/n/ntest
mount /dev/mapper/$VG-ntest /var/tmp/n/ntest
mkdir /var/tmp/n/ntest/thedir
cd /var/tmp/n/ntest/thedir
sleep 2
date
darcs init
sleep 2
dmesg|tail -n 5
date
darcs whatsnew || true
date
sleep 2
dmesg|tail -n 5
----------------[END SCRIPT]--------------------

REPRODUCIBILITY: 100%

INVESTIGATION:
As it was discovered, the issue takes place during segment
construction after executing such sequence of user-space operations:

  open("_darcs/index", O_RDWR|O_CREAT|O_NOCTTY, 0666) = 7
  fstat(7, {st_mode=S_IFREG|0644, st_size=0, ...}) = 0
  ftruncate(7, 60)

The error message "NILFS error (device dm-17): nilfs_bmap_assign: broken
bmap (inode number=28)" takes place because of trying to get block
number for third block of the file with logical offset #3072 bytes.  As
it is possible to see from above output, the file has 60 bytes of the
whole size.  So, it is enough one block (1 KB in size) allocation for
the whole file.  Trying to operate with several blocks instead of one
takes place because of discovering several dirty buffers for this file
in nilfs_segctor_scan_file() method.

The root cause of this issue is in nilfs_set_page_dirty function which
is called just before writing to an mmapped page.

When nilfs_page_mkwrite function handles a page at EOF boundary, it
fills hole blocks only inside EOF through __block_page_mkwrite().

The __block_page_mkwrite() function calls set_page_dirty() after filling
hole blocks, thus nilfs_set_page_dirty function (=
a_ops->set_page_dirty) is called.  However, the current implementation
of nilfs_set_page_dirty() wrongly marks all buffers dirty even for page
at EOF boundary.

As a result, buffers outside EOF are inconsistently marked dirty and
queued for write even though they are not mapped with nilfs_get_block
function.

FIX:
This modifies nilfs_set_page_dirty() not to mark hole blocks dirty.

Thanks to Vyacheslav Dubeyko for his effort on analysis and proposals
for this issue.

Signed-off-by: Ryusuke Konishi 
Reported-by: Anthony Doggett 
Reported-by: Vyacheslav Dubeyko 
Cc: Vyacheslav Dubeyko 
Tested-by: Ryusuke Konishi 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

aio: don't include aio.h in sched.h

2013-05-08T03:16:25+00:00

Faster kernel compiles by way of fewer unnecessary includes.

[akpm@linux-foundation.org: fix fallout]
[akpm@linux-foundation.org: fix build]
Signed-off-by: Kent Overstreet 
Cc: Zach Brown 
Cc: Felipe Balbi 
Cc: Greg Kroah-Hartman 
Cc: Mark Fasheh 
Cc: Joel Becker 
Cc: Rusty Russell 
Cc: Jens Axboe 
Cc: Asai Thambi S P 
Cc: Selvan Mani 
Cc: Sam Bradshaw 
Cc: Jeff Moyer 
Cc: Al Viro 
Cc: Benjamin LaHaise 
Reviewed-by: "Theodore Ts'o" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

nilfs2: remove unneeded test in nilfs_writepage()

2013-05-01T00:04:05+00:00

page->mapping->host cannot be NULL in nilfs_writepage(), so remove the
unneeded test.

The fixes the smatch warning: "fs/nilfs2/inode.c:211 nilfs_writepage()
error: we previously assumed 'inode' could be null (see line 195)".

Reported-by: Dan Carpenter 
Signed-off-by: Vyacheslav Dubeyko 
Cc: Ryusuke Konishi 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

nilfs2: fix using of PageLocked() in nilfs_clear_dirty_page()

2013-05-01T00:04:04+00:00

Change test_bit(PG_locked, &page->flags) to PageLocked().

Signed-off-by: Vyacheslav Dubeyko 
Cc: Ryusuke Konishi 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

nilfs2: fix issue with flush kernel thread after remount in RO mode because of driver's internal error or metadata corruption

2013-05-01T00:04:04+00:00

The NILFS2 driver remounts itself in RO mode in the case of discovering
metadata corruption (for example, discovering a broken bmap).  But
usually, this takes place when there have been file system operations
before remounting in RO mode.

Thereby, NILFS2 driver can be in RO mode with presence of dirty pages in
modified inodes' address spaces.  It results in flush kernel thread's
infinite trying to flush dirty pages in RO mode.  As a result, it is
possible to see such side effects as: (1) flush kernel thread occupies
50% - 99% of CPU time; (2) system can't be shutdowned without manual
power switch off.

SYMPTOMS:
(1) System log contains error message: "Remounting filesystem read-only".
(2) The flush kernel thread occupies 50% - 99% of CPU time.
(3) The system can't be shutdowned without manual power switch off.

REPRODUCTION PATH:
(1) Create volume group with name "unencrypted" by means of vgcreate utility.
(2) Run script (prepared by Anthony Doggett ):

  ----------------[BEGIN SCRIPT]--------------------
  #!/bin/bash

  VG=unencrypted
  #apt-get install nilfs-tools darcs
  lvcreate --size 2G --name ntest $VG
  mkfs.nilfs2 -b 1024 -B 8192 /dev/mapper/$VG-ntest
  mkdir /var/tmp/n
  mkdir /var/tmp/n/ntest
  mount /dev/mapper/$VG-ntest /var/tmp/n/ntest
  mkdir /var/tmp/n/ntest/thedir
  cd /var/tmp/n/ntest/thedir
  sleep 2
  date
  darcs init
  sleep 2
  dmesg|tail -n 5
  date
  darcs whatsnew || true
  date
  sleep 2
  dmesg|tail -n 5
  ----------------[END SCRIPT]--------------------

(3) Try to shutdown the system.

REPRODUCIBILITY: 100%

FIX:

This patch implements checking mount state of NILFS2 driver in
nilfs_writepage(), nilfs_writepages() and nilfs_mdt_write_page()
methods.  If it is detected the RO mount state then all dirty pages are
simply discarded with warning messages is written in system log.

[akpm@linux-foundation.org: fix printk warning]
Signed-off-by: Vyacheslav Dubeyko 
Acked-by: Ryusuke Konishi 
Cc: Anthony Doggett 
Cc: ARAI Shun-ichi 
Cc: Piotr Szymaniak 
Cc: Zahid Chowdhury 
Cc: Elmer Zhang 
Cc: Wu Fengguang 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

fs: Limit sys_mount to only request filesystem modules.

2013-03-04T03:36:31+00:00

Modify the request_module to prefix the file system type with "fs-"
and add aliases to all of the filesystems that can be built as modules
to match.

A common practice is to build all of the kernel code and leave code
that is not commonly needed as modules, with the result that many
users are exposed to any bug anywhere in the kernel.

Looking for filesystems with a fs- prefix limits the pool of possible
modules that can be loaded by mount to just filesystems trivially
making things safer with no real cost.

Using aliases means user space can control the policy of which
filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf
with blacklist and alias directives.  Allowing simple, safe,
well understood work-arounds to known problematic software.

This also addresses a rare but unfortunate problem where the filesystem
name is not the same as it's module name and module auto-loading
would not work.  While writing this patch I saw a handful of such
cases.  The most significant being autofs that lives in the module
autofs4.

This is relevant to user namespaces because we can reach the request
module in get_fs_type() without having any special permissions, and
people get uncomfortable when a user specified string (in this case
the filesystem type) goes all of the way to request_module.

After having looked at this issue I don't think there is any
particular reason to perform any filtering or permission checks beyond
making it clear in the module request that we want a filesystem
module.  The common pattern in the kernel is to call request_module()
without regards to the users permissions.  In general all a filesystem
module does once loaded is call register_filesystem() and go to sleep.
Which means there is not much attack surface exposed by loading a
filesytem module unless the filesystem is mounted.  In a user
namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT,
which most filesystems do not set today.

Acked-by: Serge Hallyn 
Acked-by: Kees Cook 
Reported-by: Kees Cook 
Signed-off-by: "Eric W. Biederman"

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2013-02-27T04:16:07+00:00

Pull vfs pile (part one) from Al Viro:
 "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
  locking violations, etc.

  The most visible changes here are death of FS_REVAL_DOT (replaced with
  "has ->d_weak_revalidate()") and a new helper getting from struct file
  to inode.  Some bits of preparation to xattr method interface changes.

  Misc patches by various people sent this cycle *and* ocfs2 fixes from
  several cycles ago that should've been upstream right then.

  PS: the next vfs pile will be xattr stuff."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
  saner proc_get_inode() calling conventions
  proc: avoid extra pde_put() in proc_fill_super()
  fs: change return values from -EACCES to -EPERM
  fs/exec.c: make bprm_mm_init() static
  ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
  ocfs2: fix possible use-after-free with AIO
  ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
  get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
  target: writev() on single-element vector is pointless
  export kernel_write(), convert open-coded instances
  fs: encode_fh: return FILEID_INVALID if invalid fid_type
  kill f_vfsmnt
  vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
  nfsd: handle vfs_getattr errors in acl protocol
  switch vfs_getattr() to struct path
  default SET_PERSONALITY() in linux/elf.h
  ceph: prepopulate inodes only when request is aborted
  d_hash_and_lookup(): export, switch open-coded instances
  9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
  9p: split dropping the acls from v9fs_set_create_acl()
  ...

fs: encode_fh: return FILEID_INVALID if invalid fid_type

2013-02-26T07:46:10+00:00

This patch is a follow up on below patch:

[PATCH] exportfs: add FILEID_INVALID to indicate invalid fid_type
commit: 216b6cbdcbd86b1db0754d58886b466ae31f5a63

Signed-off-by: Namjae Jeon 
Signed-off-by: Vivek Trivedi 
Acked-by: Steven Whitehouse 
Acked-by: Sage Weil 
Signed-off-by: Al Viro

new helper: file_inode(file)

2013-02-23T04:31:31+00:00

Signed-off-by: Al Viro

Merge branch 'akpm' (incoming from Andrew)

2013-02-22T01:38:49+00:00

Merge misc patches from Andrew Morton:

 - Florian has vanished so I appear to have become fbdev maintainer
   again :(

 - Joel and Mark are distracted to welcome to the new OCFS2 maintainer

 - The backlight queue

 - Small core kernel changes

 - lib/ updates

 - The rtc queue

 - Various random bits

* akpm: (164 commits)
  rtc: rtc-davinci: use devm_*() functions
  rtc: rtc-max8997: use devm_request_threaded_irq()
  rtc: rtc-max8907: use devm_request_threaded_irq()
  rtc: rtc-da9052: use devm_request_threaded_irq()
  rtc: rtc-wm831x: use devm_request_threaded_irq()
  rtc: rtc-tps80031: use devm_request_threaded_irq()
  rtc: rtc-lp8788: use devm_request_threaded_irq()
  rtc: rtc-coh901331: use devm_clk_get()
  rtc: rtc-vt8500: use devm_*() functions
  rtc: rtc-tps6586x: use devm_request_threaded_irq()
  rtc: rtc-imxdi: use devm_clk_get()
  rtc: rtc-cmos: use dev_warn()/dev_dbg() instead of printk()/pr_debug()
  rtc: rtc-pcf8583: use dev_warn() instead of printk()
  rtc: rtc-sun4v: use pr_warn() instead of printk()
  rtc: rtc-vr41xx: use dev_info() instead of printk()
  rtc: rtc-rs5c313: use pr_err() instead of printk()
  rtc: rtc-at91rm9200: use dev_dbg()/dev_err() instead of printk()/pr_debug()
  rtc: rtc-rs5c372: use dev_dbg()/dev_warn() instead of printk()/pr_debug()
  rtc: rtc-ds2404: use dev_err() instead of printk()
  rtc: rtc-efi: use dev_err()/dev_warn()/pr_err() instead of printk()
  ...