linux-toradex.git/fs/ocfs2/alloc.c, branch v4.9.132

ocfs2: fstrim: Fix start offset of first cluster group during fstrim

2017-11-08T09:08:32+00:00

commit 105ddc93f06ebe3e553f58563d11ed63dbcd59f0 upstream.

The first cluster group descriptor is not stored at the start of the
group but at an offset from the start.  We need to take this into
account while doing fstrim on the first cluster group.  Otherwise we
will wrongly start fstrim a few blocks after the desired start block and
the range can cross over into the next cluster group and zero out the
group descriptor there.  This can cause filesytem corruption that cannot
be fixed by fsck.

Link: http://lkml.kernel.org/r/1507835579-7308-1-git-send-email-ashish.samant@oracle.com
Signed-off-by: Ashish Samant 
Reviewed-by: Junxiao Bi 
Reviewed-by: Joseph Qi 
Cc: Mark Fasheh 
Cc: Joel Becker 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

Merge remote-tracking branch 'ovl/rename2' into for-linus

2016-10-11T03:02:51+00:00

fs: Replace CURRENT_TIME with current_time() for inode timestamps

2016-09-28T01:06:21+00:00

CURRENT_TIME macro is not appropriate for filesystems as it
doesn't use the right granularity for filesystem timestamps.
Use current_time() instead.

CURRENT_TIME is also not y2038 safe.

This is also in preparation for the patch that transitions
vfs timestamps to use 64 bit time and hence make them
y2038 safe. As part of the effort current_time() will be
extended to do range checks. Hence, it is necessary for all
file system timestamps to use current_time(). Also,
current_time() will be transitioned along with vfs to be
y2038 safe.

Note that whenever a single call to current_time() is used
to change timestamps in different inodes, it is because they
share the same time granularity.

Signed-off-by: Deepa Dinamani 
Reviewed-by: Arnd Bergmann 
Acked-by: Felipe Balbi 
Acked-by: Steven Whitehouse 
Acked-by: Ryusuke Konishi 
Acked-by: David Sterba 
Signed-off-by: Al Viro

ocfs2: fix trans extend while free cached blocks

2016-09-19T22:36:17+00:00

The root cause of this issue is the same with the one fixed by the last
patch, but this time credits for allocator inode and group descriptor
may not be consumed before trans extend.

The following error was caught:

  WARNING: CPU: 0 PID: 2037 at fs/jbd2/transaction.c:269 start_this_handle+0x4c3/0x510 [jbd2]()
  Modules linked in: ocfs2 nfsd lockd grace nfs_acl auth_rpcgss sunrpc autofs4 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sd_mod sg ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ppdev xen_kbdfront fb_sys_fops sysimgblt sysfillrect syscopyarea xen_netfront parport_pc parport pcspkr i2c_piix4 i2c_core acpi_cpufreq ext4 jbd2 mbcache xen_blkfront floppy pata_acpi ata_generic ata_piix dm_mirror dm_region_hash dm_log dm_mod
  CPU: 0 PID: 2037 Comm: rm Tainted: G        W       4.1.12-37.6.3.el6uek.bug24573128v2.x86_64 #2
  Hardware name: Xen HVM domU, BIOS 4.4.4OVM 02/11/2016
  Call Trace:
    dump_stack+0x48/0x5c
    warn_slowpath_common+0x95/0xe0
    warn_slowpath_null+0x1a/0x20
    start_this_handle+0x4c3/0x510 [jbd2]
    jbd2__journal_restart+0x161/0x1b0 [jbd2]
    jbd2_journal_restart+0x13/0x20 [jbd2]
    ocfs2_extend_trans+0x74/0x220 [ocfs2]
    ocfs2_free_cached_blocks+0x16b/0x4e0 [ocfs2]
    ocfs2_run_deallocs+0x70/0x270 [ocfs2]
    ocfs2_commit_truncate+0x474/0x6f0 [ocfs2]
    ocfs2_truncate_for_delete+0xbd/0x380 [ocfs2]
    ocfs2_wipe_inode+0x136/0x6a0 [ocfs2]
    ocfs2_delete_inode+0x2a2/0x3e0 [ocfs2]
    ocfs2_evict_inode+0x28/0x60 [ocfs2]
    evict+0xab/0x1a0
    iput_final+0xf6/0x190
    iput+0xc8/0xe0
    do_unlinkat+0x1b7/0x310
    SyS_unlinkat+0x22/0x40
    system_call_fastpath+0x12/0x71
  ---[ end trace a62437cb060baa71 ]---
  JBD2: rm wants too many credits (149 > 128)

Link: http://lkml.kernel.org/r/1473674623-11810-2-git-send-email-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi 
Reviewed-by: Joseph Qi 
Cc: Mark Fasheh 
Cc: Joel Becker 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

ocfs2: fix trans extend while flush truncate log

2016-09-19T22:36:17+00:00

Every time, ocfs2_extend_trans() included a credit for truncate log
inode, but as that inode had been managed by jbd2 running transaction
first time, it will not consume that credit until
jbd2_journal_restart().

Since total credits to extend always included the un-consumed ones,
there will be more and more un-consumed credit, at last
jbd2_journal_restart() will fail due to credit number over the half of
max transction credit.

The following error was caught when unlinking a large file with many
extents:

  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 13626 at fs/jbd2/transaction.c:269 start_this_handle+0x4c3/0x510 [jbd2]()
  Modules linked in: ocfs2 nfsd lockd grace nfs_acl auth_rpcgss sunrpc autofs4 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sd_mod sg ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ppdev xen_kbdfront xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea parport_pc parport pcspkr i2c_piix4 i2c_core acpi_cpufreq ext4 jbd2 mbcache xen_blkfront floppy pata_acpi ata_generic ata_piix dm_mirror dm_region_hash dm_log dm_mod
  CPU: 0 PID: 13626 Comm: unlink Tainted: G        W       4.1.12-37.6.3.el6uek.x86_64 #2
  Hardware name: Xen HVM domU, BIOS 4.4.4OVM 02/11/2016
  Call Trace:
    dump_stack+0x48/0x5c
    warn_slowpath_common+0x95/0xe0
    warn_slowpath_null+0x1a/0x20
    start_this_handle+0x4c3/0x510 [jbd2]
    jbd2__journal_restart+0x161/0x1b0 [jbd2]
    jbd2_journal_restart+0x13/0x20 [jbd2]
    ocfs2_extend_trans+0x74/0x220 [ocfs2]
    ocfs2_replay_truncate_records+0x93/0x360 [ocfs2]
    __ocfs2_flush_truncate_log+0x13e/0x3a0 [ocfs2]
    ocfs2_remove_btree_range+0x458/0x7f0 [ocfs2]
    ocfs2_commit_truncate+0x1b3/0x6f0 [ocfs2]
    ocfs2_truncate_for_delete+0xbd/0x380 [ocfs2]
    ocfs2_wipe_inode+0x136/0x6a0 [ocfs2]
    ocfs2_delete_inode+0x2a2/0x3e0 [ocfs2]
    ocfs2_evict_inode+0x28/0x60 [ocfs2]
    evict+0xab/0x1a0
    iput_final+0xf6/0x190
    iput+0xc8/0xe0
    do_unlinkat+0x1b7/0x310
    SyS_unlink+0x16/0x20
    system_call_fastpath+0x12/0x71
  ---[ end trace 28aa7410e69369cf ]---
  JBD2: unlink wants too many credits (251 > 128)

Link: http://lkml.kernel.org/r/1473674623-11810-1-git-send-email-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi 
Reviewed-by: Joseph Qi 
Cc: Mark Fasheh 
Cc: Joel Becker 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

ocfs2: retry on ENOSPC if sufficient space in truncate log

2016-08-02T21:31:41+00:00

The testcase "mmaptruncate" in ocfs2 test suite always fails with ENOSPC
error on small volume (say less than 10G).  This testcase repeatedly
performs "extend" and "truncate" on a file.  Continuously, it truncates
the file to 1/2 of the size, and then extends to 100% of the size.  The
main bitmap will quickly run out of space because the "truncate" code
prevent truncate log from being flushed by
ocfs2_schedule_truncate_log_flush(osb, 1), while truncate log may have
cached lots of clusters.

So retry to allocate after flushing truncate log when ENOSPC is
returned.  And we cannot reuse the deleted blocks before the transaction
committed.  Fortunately, we already have a function to do this -
ocfs2_try_to_free_truncate_log().  Just need to remove the "static"
modifier and put it into the right place.

The "unlock"/"lock" code isn't elegant, but there seems to be no better
option.

[zren@suse.com: locking fix]
  Link: http://lkml.kernel.org/r/1468031546-4797-1-git-send-email-zren@suse.com
Link: http://lkml.kernel.org/r/1466586469-5541-1-git-send-email-zren@suse.com
Signed-off-by: Eric Ren 
Reviewed-by: Gang He 
Reviewed-by: Joseph Qi 
Reviewed-by: Mark Fasheh 
Cc: Joel Becker 
Cc: Junxiao Bi 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

ocfs2: clean up an unused variable 'wants_rotate' in ocfs2_truncate_rec

2016-05-20T02:12:14+00:00

Clean up an unused variable 'wants_rotate' in ocfs2_truncate_rec.

Signed-off-by: Jun Piao 
Reviewed-by: Joseph Qi 
Cc: Mark Fasheh 
Cc: Joel Becker 
Cc: Junxiao Bi 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros

2016-04-04T17:41:08+00:00

PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.

This promise never materialized.  And unlikely will.

We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE.  And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.

Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.

Let's stop pretending that pages in page cache are special.  They are
not.

The changes are pretty straight-forward:

 -  << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> ;

 -  >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> ;

 - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};

 - page_cache_get() -> get_page();

 - page_cache_release() -> put_page();

This patch contains automated changes generated with coccinelle using
script below.  For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.

The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.

There are few places in the code where coccinelle didn't reach.  I'll
fix them manually in a separate patch.  Comments and documentation also
will be addressed with the separate patch.

virtual patch

@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT

@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE

@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK

@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)

@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)

@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)

Signed-off-by: Kirill A. Shutemov 
Acked-by: Michal Hocko 
Signed-off-by: Linus Torvalds

ocfs2: extend enough credits for freeing one truncate record while replaying truncate records

2016-03-25T23:37:42+00:00

Now function ocfs2_replay_truncate_records() first modifies tl_used,
then calls ocfs2_extend_trans() to extend transactions for gd and alloc
inode used for freeing clusters.  jbd2_journal_restart() may be called
and it may happen that tl_used in truncate log is decreased but the
clusters are not freed, which means these clusters are lost.  So we
should avoid extending transactions in these two operations.

Signed-off-by: joyce.xue 
Reviewed-by: Mark Fasheh 
Acked-by: Joseph Qi 
Cc: Joel Becker 
Cc: Junxiao Bi 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

ocfs2: extend transaction for ocfs2_remove_rightmost_path() and ocfs2_update_edge_lengths() before to avoid inconsistency between inode and et

2016-03-25T23:37:42+00:00

I found that jbd2_journal_restart() is called in some places without
keeping things consistently before.  However, jbd2_journal_restart() may
commit the handle's transaction and restart another one.  If the first
transaction is committed successfully while another not, it may cause
filesystem inconsistency or read only.  This is an effort to fix this
kind of problems.

This patch (of 3):

The following functions will be called while truncating an extent:
ocfs2_remove_btree_range
  -> ocfs2_start_trans
  -> ocfs2_remove_extent
     -> ocfs2_truncate_rec
       -> ocfs2_extend_rotate_transaction
         -> jbd2_journal_restart if jbd2_journal_extend fail
       -> ocfs2_rotate_tree_left
         -> ocfs2_remove_rightmost_path
             -> ocfs2_extend_rotate_transaction
               -> ocfs2_unlink_subtree
                -> ocfs2_update_edge_lengths
                  -> ocfs2_extend_trans
                    -> jbd2_journal_restart if jbd2_journal_extend fail
  -> ocfs2_et_update_clusters
  -> ocfs2_commit_trans

jbd2_journal_restart() may be called and it may happened that the buffers
dirtied in ocfs2_truncate_rec() are committed while buffers dirtied in
ocfs2_et_update_clusters() are not, the total clusters on extent tree and
i_clusters in ocfs2_dinode is inconsistency.  So the clusters got from
ocfs2_dinode is incorrect, and it also cause read-only problem when call
ocfs2_commit_truncate() with the error message: "Inode %llu has empty
extent block at %llu".

We should extend enough credits for function ocfs2_remove_rightmost_path
and ocfs2_update_edge_lengths to avoid this inconsistency.

Signed-off-by: joyce.xue 
Acked-by: Joseph Qi 
Cc: Mark Fasheh 
Cc: Joel Becker 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds