linux-toradex.git/fs/ocfs2/buffer_head_io.c, branch v4.9.2

Merge branch 'for-4.8/core' of git://git.kernel.dk/linux-block

2016-07-26T22:03:07+00:00

Pull core block updates from Jens Axboe:

   - the big change is the cleanup from Mike Christie, cleaning up our
     uses of command types and modified flags.  This is what will throw
     some merge conflicts

   - regression fix for the above for btrfs, from Vincent

   - following up to the above, better packing of struct request from
     Christoph

   - a 2038 fix for blktrace from Arnd

   - a few trivial/spelling fixes from Bart Van Assche

   - a front merge check fix from Damien, which could cause issues on
     SMR drives

   - Atari partition fix from Gabriel

   - convert cfq to highres timers, since jiffies isn't granular enough
     for some devices these days.  From Jan and Jeff

   - CFQ priority boost fix idle classes, from me

   - cleanup series from Ming, improving our bio/bvec iteration

   - a direct issue fix for blk-mq from Omar

   - fix for plug merging not involving the IO scheduler, like we do for
     other types of merges.  From Tahsin

   - expose DAX type internally and through sysfs.  From Toshi and Yigal

* 'for-4.8/core' of git://git.kernel.dk/linux-block: (76 commits)
  block: Fix front merge check
  block: do not merge requests without consulting with io scheduler
  block: Fix spelling in a source code comment
  block: expose QUEUE_FLAG_DAX in sysfs
  block: add QUEUE_FLAG_DAX for devices to advertise their DAX support
  Btrfs: fix comparison in __btrfs_map_block()
  block: atari: Return early for unsupported sector size
  Doc: block: Fix a typo in queue-sysfs.txt
  cfq-iosched: Charge at least 1 jiffie instead of 1 ns
  cfq-iosched: Fix regression in bonnie++ rewrite performance
  cfq-iosched: Convert slice_resid from u64 to s64
  block: Convert fifo_time from ulong to u64
  blktrace: avoid using timespec
  block/blk-cgroup.c: Declare local symbols static
  block/bio-integrity.c: Add #include "blk.h"
  block/partition-generic.c: Remove a set-but-not-used variable
  block: bio: kill BIO_MAX_SIZE
  cfq-iosched: temporarily boost queue priority for idle classes
  block: drbd: avoid to use BIO_MAX_SIZE
  block: bio: remove BIO_MAX_SECTORS
  ...

ocfs2: disable BUG assertions in reading blocks

2016-06-25T00:23:52+00:00

According to some high-load testing, these two BUG assertions were
encountered, this led system panic.  Actually, there were some
discussions about removing these two BUG() assertions, it would not
bring any side effect.

Then, I did the the following changes,

1) use the existing macro CATCH_BH_JBD_RACES to wrap BUG() in the
   ocfs2_read_blocks_sync function like before.

2) disable the macro CATCH_BH_JBD_RACES in Makefile by default.

Link: http://lkml.kernel.org/r/1466574294-26863-1-git-send-email-ghe@suse.com
Signed-off-by: Gang He 
Cc: Mark Fasheh 
Cc: Joel Becker 
Cc: Junxiao Bi 
Cc: Joseph Qi 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

fs: have submit_bh users pass in op and flags separately

2016-06-07T19:41:38+00:00

This has submit_bh users pass in the operation and flags separately,
so submit_bh_wbc can setup the bio op and bi_rw flags on the bio that
is submitted.

Signed-off-by: Mike Christie 
Reviewed-by: Christoph Hellwig 
Reviewed-by: Hannes Reinecke 
Signed-off-by: Jens Axboe

ocfs2: clear the rest of the buffers on error

2015-09-04T23:54:41+00:00

In case a validation fails, clear the rest of the buffers and return the
error to the calling function.

This also facilitates bubbling up the error originating from ocfs2_error
to calling functions.

Signed-off-by: Goldwyn Rodrigues 
Reviewed-by: Mark Fasheh 
Cc: Joel Becker 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

ocfs2: do not put bh when buffer_uptodate failed

2014-04-03T23:20:56+00:00

Do not put bh when buffer_uptodate failed in ocfs2_write_block and
ocfs2_write_super_or_backup, because it will put bh in b_end_io.
Otherwise it will hit a warning "VFS: brelse: Trying to free free
buffer".

Signed-off-by: Alex Chen 
Reviewed-by: Joseph Qi 
Reviewed-by: Srinivas Eeda 
Cc: Mark Fasheh 
Acked-by: Joel Becker 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

ocfs2: return ENOMEM when sb_getblk() fails

2013-11-13T03:09:00+00:00

The only reason for sb_getblk() failing is if it can't allocate the
buffer_head.  So return ENOMEM instead when it fails.

[joseph.qi@huawei.com: ocfs2_symlink_get_block() and ocfs2_read_blocks_sync() and ocfs2_read_blocks() need the same change]
Signed-off-by: Rui Xiang 
Reviewed-by: Jie Liu 
Reviewed-by: Mark Fasheh 
Cc: Joel Becker 
Cc: Joseph Qi 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

ocfs2: Remove masklog ML_UPTODATE.

2011-02-24T08:22:20+00:00

Remove mlog(0,...) and mlog(ML_UPTODATE,...) from
fs/ocfs2/uptodate.c and fs/ocfs2/buffer_head_io.c.

The masklog UPTODATE is removed finally.

Signed-off-by: Tao Ma

ocfs2: Remove masklog ML_BH_IO.

2011-02-24T08:09:38+00:00

Remove mlog(0,...) and mlog(ML_BH_IO,...) from
fs/ocfs2/buffer_head_io.c.
The masklog BH_IO is removed finally.

Signed-off-by: Tao Ma

ocfs2: Remove EXIT from masklog.

2011-03-07T08:43:21+00:00

mlog_exit is used to record the exit status of a function.
But because it is added in so many functions, if we enable it,
the system logs get filled up quickly and cause too much I/O.
So actually no one can open it for a production system or even
for a test.

This patch just try to remove it or change it. So:
1. if all the error paths already use mlog_errno, it is just removed.
   Otherwise, it will be replaced by mlog_errno.
2. if it is used to print some return value, it is replaced with
   mlog(0,...).
mlog_exit_ptr is changed to mlog(0.
All those mlog(0,...) will be replaced with trace events later.

Signed-off-by: Tao Ma

ocfs2: Remove ENTRY from masklog.

2011-02-21T03:10:44+00:00

ENTRY is used to record the entry of a function.
But because it is added in so many functions, if we enable it,
the system logs get filled up quickly and cause too much I/O.
So actually no one can open it for a production system or even
for a test.

So for mlog_entry_void, we just remove it.
for mlog_entry(...), we replace it with mlog(0,...), and they
will be replace by trace event later.

Signed-off-by: Tao Ma