linux-toradex.git/fs/ocfs2/heartbeat.c, branch v3.10.37

ocfs2: Remove mlog(0) from fs/ocfs2/heartbeat.c

2011-02-23T13:17:39+00:00

This is the 2nd step to remove the debug info of SUPER.

Signed-off-by: Tao Ma

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32+00:00

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo 
Guess-its-ok-by: Christoph Lameter 
Cc: Ingo Molnar 
Cc: Lee Schermerhorn

ocfs2: Move o2hb functionality into the stack glue.

2008-04-18T15:56:04+00:00

The last bit of classic stack used directly in ocfs2 code is o2hb.
Specifically, the check for heartbeat during mount and the call to
ocfs2_hb_ctl during unmount.

We create an extra API, ocfs2_cluster_hangup(), to encapsulate the call
to ocfs2_hb_ctl.  Other stacks will just leave hangup() empty.

The check for heartbeat is moved into ocfs2_cluster_connect().  It will
be matched by a similar check for other stacks.

With this change, only stackglue.c includes cluster/ headers.

Signed-off-by: Joel Becker 
Signed-off-by: Mark Fasheh

ocfs2: Introduce the new ocfs2_cluster_connect/disconnect() API.

2008-04-18T15:56:04+00:00

This step introduces a cluster stack agnostic API for initializing and
exiting.  fs/ocfs2/dlmglue.c no longer uses o2cb/o2dlm knowledge to
connect to the stack.  It is all handled in stackglue.c.

heartbeat.c no longer needs to know how it gets called.
ocfs2_do_node_down() is now a clean recovery trigger.

The big gotcha is the ordering of initializations and de-initializations done
underneath ocfs2_cluster_connect().  ocfs2_dlm_init() used to do all
o2dlm initialization in one block.  Thus, the o2dlm functionality of
ocfs2_cluster_connect() is very straightforward.  ocfs2_dlm_shutdown(),
however, did a few things between de-registration of the eviction
callback and actually shutting down the domain.  Now de-registration and
shutdown of the domain are wrapped within the single
ocfs2_cluster_disconnect() call.  I've checked the code paths to make
sure we can safely tear down things in ocfs2_dlm_shutdown() before
calling ocfs2_cluster_disconnect().  The filesystem has already set
itself to ignore the callback.

Signed-off-by: Joel Becker 
Signed-off-by: Mark Fasheh

ocfs2: Change the recovery map to an array of node numbers.

2008-04-18T15:56:02+00:00

The old recovery map was a bitmap of node numbers.  This was sufficient
for the maximum node number of 254.  Going forward, we want node numbers
to be UINT32.  Thus, we need a new recovery map.

Note that we can't keep track of slots here.  We must write down the
node number to recovery *before* we get the locks needed to convert a
node number into a slot number.

The recovery map is now an array of unsigned ints, max_slots in size.
It moves to journal.c with the rest of recovery.

Because it needs to be initialized, we move all of recovery initialization
into a new function, ocfs2_recovery_init().  This actually cleans up
ocfs2_initialize_super() a little as well.  Following on, recovery cleaup
becomes part of ocfs2_recovery_exit().

A number of node map functions are rendered obsolete and are removed.

Finally, waiting on recovery is wrapped in a function rather than naked
checks on the recovery_event.  This is a cleanup from Mark.

Signed-off-by: Joel Becker 
Signed-off-by: Mark Fasheh

[2.6 patch] fs/ocfs2/: possible cleanups

2008-03-03T23:50:21+00:00

This patch contains the following cleanups that are now possible:
- make the following needlessly global functions static:
  - dlmglue.c:ocfs2_process_blocked_lock()
  - heartbeat.c:ocfs2_node_map_init()
- #if 0 the following unused global function plus support functions:
  - heartbeat.c:ocfs2_node_map_is_only()

Signed-off-by: Adrian Bunk 
Signed-off-by: Mark Fasheh

ocfs2: Remove mount/unmount votes

2008-01-25T22:45:34+00:00

The node maps that are set/unset by these votes are no longer relevant, thus
we can remove the mount and umount votes. Since those are the last two
remaining votes, we can also remove the entire vote infrastructure.

The vote thread has been renamed to the downconvert thread, and the small
amount of functionality related to managing it has been moved into
fs/ocfs2/dlmglue.c. All references to votes have been removed or updated.

Signed-off-by: Mark Fasheh

ocfs2: Remove fs dependency on ocfs2_heartbeat module

2008-01-25T22:36:40+00:00

Now that the dlm exposes domain information to us, we don't need generic
node up / node down callbacks. And since the DLM is only telling us when a
node goes down unexpectedly, we no longer need to optimize away node down
callbacks via the umount map.

Signed-off-by: Mark Fasheh

usermodehelper: Tidy up waiting

2007-07-18T15:47:40+00:00

Rather than using a tri-state integer for the wait flag in
call_usermodehelper_exec, define a proper enum, and use that.  I've
preserved the integer values so that any callers I've missed should
still work OK.

Signed-off-by: Jeremy Fitzhardinge 
Cc: James Bottomley 
Cc: Randy Dunlap 
Cc: Christoph Hellwig 
Cc: Andi Kleen 
Cc: Paul Mackerras 
Cc: Johannes Berg 
Cc: Ralf Baechle 
Cc: Bjorn Helgaas 
Cc: Joel Becker 
Cc: Tony Luck 
Cc: Kay Sievers 
Cc: Srivatsa Vaddagiri 
Cc: Oleg Nesterov 
Cc: David Howells

ocfs2: Depend on configfs heartbeat items.

2007-07-11T00:19:40+00:00

ocfs2 mounts require a heartbeat region.  Use the new configfs_depend_item()
facility to actually depend on them so they can't go away from under us.

First, teach cluster/nodemanager.c to depend an item on the o2cb subsystem.
Then teach o2hb_register_callbacks to take a UUID and depend on the
appropriate region.  Finally, teach all users of o2hb to pass a UUID or
NULL if they don't require a pin.

Signed-off-by: Joel Becker 
Signed-off-by: Mark Fasheh