linux-toradex.git/fs/ocfs2, branch v3.15-rc8

ocfs2: fix double kmem_cache_destroy in dlm_init

2014-05-23T16:37:30+00:00

In dlm_init, if create dlm_lockname_cache failed in
dlm_init_master_caches, it will destroy dlm_lockres_cache which created
before twice.  And this will cause system die when loading modules.

Signed-off-by: Joseph Qi 
Cc: Mark Fasheh 
Cc: Joel Becker 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2014-04-13T00:31:22+00:00

Pull yet more networking updates from David Miller:

1) Various fixes to the new Redpine Signals wireless driver, from
Fariya Fatima.

2) L2TP PPP connect code takes PMTU from the wrong socket, fix from
Dmitry Petukhov.

3) UFO and TSO packets differ in whether they include the protocol
header in gso_size, account for that in skb_gso_transport_seglen().
From Florian Westphal.

4) If VLAN untagging fails, we double free the SKB in the bridging
output path. From Toshiaki Makita.

5) Several call sites of sk->sk_data_ready() were referencing an SKB
just added to the socket receive queue in order to calculate the
second argument via skb->len. This is dangerous because the moment
the skb is added to the receive queue it can be consumed in another
context and freed up.

It turns out also that none of the sk->sk_data_ready()
implementations even care about this second argument.

So just kill it off and thus fix all these use-after-free bugs as a
side effect.

6) Fix inverted test in tcp_v6_send_response(), from Lorenzo Colitti.

7) pktgen needs to do locking properly for LLTX devices, from Daniel
Borkmann.

8) xen-netfront driver initializes TX array entries in RX loop :-) From
Vincenzo Maffione.

9) After refactoring, some tunnel drivers allow a tunnel to be
configured on top itself. Fix from Nicolas Dichtel.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits)
vti: don't allow to add the same tunnel twice
gre: don't allow to add the same tunnel twice
drivers: net: xen-netfront: fix array initialization bug
pktgen: be friendly to LLTX devices
r8152: check RTL8152_UNPLUG
net: sun4i-emac: add promiscuous support
net/apne: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO
net: ipv6: Fix oif in TCP SYN+ACK route lookup.
drivers: net: cpsw: enable interrupts after napi enable and clearing previous interrupts
drivers: net: cpsw: discard all packets received when interface is down
net: Fix use after free by removing length arg from sk_data_ready callbacks.
Drivers: net: hyperv: Address UDP checksum issues
Drivers: net: hyperv: Negotiate suitable ndis version for offload support
Drivers: net: hyperv: Allocate memory for all possible per-pecket information
bridge: Fix double free and memory leak around br_allowed_ingress
bonding: Remove debug_fs files when module init fails
i40evf: program RSS LUT correctly
i40evf: remove open-coded skb_cow_head
ixgb: remove open-coded skb_cow_head
igbvf: remove open-coded skb_cow_head
...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2014-04-12T21:49:50+00:00

Pull vfs updates from Al Viro:
 "The first vfs pile, with deep apologies for being very late in this
  window.

  Assorted cleanups and fixes, plus a large preparatory part of iov_iter
  work.  There's a lot more of that, but it'll probably go into the next
  merge window - it *does* shape up nicely, removes a lot of
  boilerplate, gets rid of locking inconsistencie between aio_write and
  splice_write and I hope to get Kent's direct-io rewrite merged into
  the same queue, but some of the stuff after this point is having
  (mostly trivial) conflicts with the things already merged into
  mainline and with some I want more testing.

  This one passes LTP and xfstests without regressions, in addition to
  usual beating.  BTW, readahead02 in ltp syscalls testsuite has started
  giving failures since "mm/readahead.c: fix readahead failure for
  memoryless NUMA nodes and limit readahead pages" - might be a false
  positive, might be a real regression..."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
  missing bits of "splice: fix racy pipe->buffers uses"
  cifs: fix the race in cifs_writev()
  ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure
  kill generic_file_buffered_write()
  ocfs2_file_aio_write(): switch to generic_perform_write()
  ceph_aio_write(): switch to generic_perform_write()
  xfs_file_buffered_aio_write(): switch to generic_perform_write()
  export generic_perform_write(), start getting rid of generic_file_buffer_write()
  generic_file_direct_write(): get rid of ppos argument
  btrfs_file_aio_write(): get rid of ppos
  kill the 5th argument of generic_file_buffered_write()
  kill the 4th argument of __generic_file_aio_write()
  lustre: don't open-code kernel_recvmsg()
  ocfs2: don't open-code kernel_recvmsg()
  drbd: don't open-code kernel_recvmsg()
  constify blk_rq_map_user_iov() and friends
  lustre: switch to kernel_sendmsg()
  ocfs2: don't open-code kernel_sendmsg()
  take iov_iter stuff to mm/iov_iter.c
  process_vm_access: tidy up a bit
  ...

net: Fix use after free by removing length arg from sk_data_ready callbacks.

2014-04-11T20:15:36+00:00

Several spots in the kernel perform a sequence like:

	skb_queue_tail(&sk->s_receive_queue, skb);
	sk->sk_data_ready(sk, skb->len);

But at the moment we place the SKB onto the socket receive queue it
can be consumed and freed up.  So this skb->len access is potentially
to freed up memory.

Furthermore, the skb->len can be modified by the consumer so it is
possible that the value isn't accurate.

And finally, no actual implementation of this callback actually uses
the length argument.  And since nobody actually cared about it's
value, lots of call sites pass arbitrary values in such as '0' and
even '1'.

So just remove the length argument from the callback, that way there
is no confusion whatsoever and all of these use-after-free cases get
fixed as a side effect.

Based upon a patch by Eric Dumazet and his suggestion to audit this
issue tree-wide.

Signed-off-by: David S. Miller

Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

2014-04-06T16:38:07+00:00

Pull module updates from Rusty Russell:
 "Nothing major: the stricter permissions checking for sysfs broke a
  staging driver; fix included.  Greg KH said he'd take the patch but
  hadn't as the merge window opened, so it's included here to avoid
  breaking build"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  staging: fix up speakup kobject mode
  Use 'E' instead of 'X' for unsigned module taint flag.
  VERIFY_OCTAL_PERMISSIONS: stricter checking for sysfs perms.
  kallsyms: fix percpu vars on x86-64 with relocation.
  kallsyms: generalize address range checking
  module: LLVMLinux: Remove unused function warning from __param_check macro
  Fix: module signature vs tracepoints: add new TAINT_UNSIGNED_MODULE
  module: remove MODULE_GENERIC_TABLE
  module: allow multiple calls to MODULE_DEVICE_TABLE() per module
  module: use pr_cont

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

2014-04-04T22:39:39+00:00

Pull ext4 updates from Ted Ts'o:
 "Major changes for 3.14 include support for the newly added ZERO_RANGE
  and COLLAPSE_RANGE fallocate operations, and scalability improvements
  in the jbd2 layer and in xattr handling when the extended attributes
  spill over into an external block.

  Other than that, the usual clean ups and minor bug fixes"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (42 commits)
  ext4: fix premature freeing of partial clusters split across leaf blocks
  ext4: remove unneeded test of ret variable
  ext4: fix comment typo
  ext4: make ext4_block_zero_page_range static
  ext4: atomically set inode->i_flags in ext4_set_inode_flags()
  ext4: optimize Hurd tests when reading/writing inodes
  ext4: kill i_version support for Hurd-castrated file systems
  ext4: each filesystem creates and uses its own mb_cache
  fs/mbcache.c: doucple the locking of local from global data
  fs/mbcache.c: change block and index hash chain to hlist_bl_node
  ext4: Introduce FALLOC_FL_ZERO_RANGE flag for fallocate
  ext4: refactor ext4_fallocate code
  ext4: Update inode i_size after the preallocation
  ext4: fix partial cluster handling for bigalloc file systems
  ext4: delete path dealloc code in ext4_ext_handle_uninitialized_extents
  ext4: only call sync_filesystm() when remounting read-only
  fs: push sync_filesystem() down to the file system's remount_fs()
  jbd2: improve error messages for inconsistent journal heads
  jbd2: minimize region locked by j_list_lock in jbd2_journal_forget()
  jbd2: minimize region locked by j_list_lock in journal_get_create_access()
  ...

mm + fs: store shadow entries in page cache

2014-04-03T23:21:01+00:00

Reclaim will be leaving shadow entries in the page cache radix tree upon
evicting the real page.  As those pages are found from the LRU, an
iput() can lead to the inode being freed concurrently.  At this point,
reclaim must no longer install shadow pages because the inode freeing
code needs to ensure the page tree is really empty.

Add an address_space flag, AS_EXITING, that the inode freeing code sets
under the tree lock before doing the final truncate.  Reclaim will check
for this flag before installing shadow pages.

Signed-off-by: Johannes Weiner 
Reviewed-by: Rik van Riel 
Reviewed-by: Minchan Kim 
Cc: Andrea Arcangeli 
Cc: Bob Liu 
Cc: Christoph Hellwig 
Cc: Dave Chinner 
Cc: Greg Thelen 
Cc: Hugh Dickins 
Cc: Jan Kara 
Cc: KOSAKI Motohiro 
Cc: Luigi Semenzato 
Cc: Mel Gorman 
Cc: Metin Doslu 
Cc: Michel Lespinasse 
Cc: Ozgun Erdogan 
Cc: Peter Zijlstra 
Cc: Roman Gushchin 
Cc: Ryan Mallon 
Cc: Tejun Heo 
Cc: Vlastimil Babka 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

ocfs2: pass "new" parameter to ocfs2_init_xattr_bucket

2014-04-03T23:20:57+00:00

This patch fixes the following crash:

  kernel BUG at fs/ocfs2/uptodate.c:530!
  Modules linked in: ocfs2(F) ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs bridge xen_pciback xen_netback xen_blkback xen_gntalloc xen_gntdev xen_evtchn xenfs xen_privcmd sunrpc 8021q garp stp llc bonding be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi iTCO_wdt iTCO_vendor_support dcdbas coretemp freq_table mperf microcode pcspkr serio_raw bnx2 lpc_ich mfd_core i5k_amb i5000_edac edac_core e1000e sg shpchp ext4(F) jbd2(F) mbcache(F) dm_round_robin(F) sr_mod(F) cdrom(F) usb_storage(F) sd_mod(F) crc_t10dif(F) pata_acpi(F) ata_generic(F) ata_piix(F) mptsas(F) mptscsih(F) mptbase(F) scsi_transport_sas(F) radeon(F)
   ttm(F) drm_kms_helper(F) drm(F) hwmon(F) i2c_algo_bit(F) i2c_core(F) dm_multipath(F) dm_mirror(F) dm_region_hash(F) dm_log(F) dm_mod(F)
  CPU 5
  Pid: 21303, comm: xattr-test Tainted: GF       W    3.8.13-30.el6uek.x86_64 #2 Dell Inc. PowerEdge 1950/0M788G
  RIP: ocfs2_set_new_buffer_uptodate+0x51/0x60 [ocfs2]
  Process xattr-test (pid: 21303, threadinfo ffff880017aca000, task ffff880016a2c480)
  Call Trace:
    ocfs2_init_xattr_bucket+0x8a/0x120 [ocfs2]
    ocfs2_cp_xattr_bucket+0xbb/0x1b0 [ocfs2]
    ocfs2_extend_xattr_bucket+0x20a/0x2f0 [ocfs2]
    ocfs2_add_new_xattr_bucket+0x23e/0x4b0 [ocfs2]
    ocfs2_xattr_set_entry_index_block+0x13c/0x3d0 [ocfs2]
    ocfs2_xattr_block_set+0xf9/0x220 [ocfs2]
    __ocfs2_xattr_set_handle+0x118/0x710 [ocfs2]
    ocfs2_xattr_set+0x691/0x880 [ocfs2]
    ocfs2_xattr_user_set+0x46/0x50 [ocfs2]
    generic_setxattr+0x96/0xa0
    __vfs_setxattr_noperm+0x7b/0x170
    vfs_setxattr+0xbc/0xc0
    setxattr+0xde/0x230
    sys_fsetxattr+0xc6/0xf0
    system_call_fastpath+0x16/0x1b
  Code: 41 80 0c 24 01 48 89 df e8 7d f0 ff ff 4c 89 e6 48 89 df e8 a2 fe ff ff 48 89 df e8 3a f0 ff ff 48 8b 1c 24 4c 8b 64 24 08 c9 c3 <0f> 0b eb fe 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 66 66
  RIP  ocfs2_set_new_buffer_uptodate+0x51/0x60 [ocfs2]

It hit the BUG_ON() in ocfs2_set_new_buffer_uptodate():

    void ocfs2_set_new_buffer_uptodate(struct ocfs2_caching_info *ci,
                                       struct buffer_head *bh)
    {
          /* This should definitely *not* exist in our cache */
          if (ocfs2_buffer_cached(ci, bh))
                  printk(KERN_ERR "bh->b_blocknr: %lu @ %p\n", bh->b_blocknr, bh);
          BUG_ON(ocfs2_buffer_cached(ci, bh));

          set_buffer_uptodate(bh);

          ocfs2_metadata_cache_io_lock(ci);
          ocfs2_set_buffer_uptodate(ci, bh);
          ocfs2_metadata_cache_io_unlock(ci);
    }

The problem here is:

We cached a block, but the buffer_head got reused.  When we are to pick
up this block again, a new buffer_head created with UPTODATE flag
cleared.  ocfs2_buffer_uptodate() returned false since no UPTODATE is
set on the buffer_head.  so we set this block to cache as a NEW block,
then it failed at asserting block is not in cache.

The fix is to add a new parameter indicating the bucket is a new
allocated or not to ocfs2_init_xattr_bucket().
ocfs2_init_xattr_bucket() assert block not cached accordingly.

Signed-off-by: Wengang Wang 
Cc: Joel Becker 
Reviewed-by: Mark Fasheh 
Cc: Joe Jin 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

ocfs2: avoid system inode ref confusion by adding mutex lock

2014-04-03T23:20:57+00:00

The following case may lead to the same system inode ref in confusion.

A thread                            B thread
ocfs2_get_system_file_inode
->get_local_system_inode
->_ocfs2_get_system_file_inode
                                    because of *arr == NULL,
                                    ocfs2_get_system_file_inode
                                    ->get_local_system_inode
                                    ->_ocfs2_get_system_file_inode
gets first ref thru
_ocfs2_get_system_file_inode,
gets second ref thru igrab and
set *arr = inode
                                    at the moment, B thread also gets
                                    two refs, so lead to one more
                                    inode ref.

So add mutex lock to avoid multi thread set two inode ref once at the
same time.

Signed-off-by: jiangyiwen 
Reviewed-by: Joseph Qi 
Cc: Joel Becker 
Cc: Mark Fasheh 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

ocfs2: iput inode alloc when failed locally

2014-04-03T23:20:57+00:00

In ocfs2_info_handle_freeinode() and ocfs2_test_inode_bit() func, after
calls ocfs2_get_system_file_inode() to get inode ref, if calls
ocfs2_info_scan_inode_alloc() or ocfs2_inode_lock() failed, we should
iput inode alloc to avoid leaking the inode.

Signed-off-by: jiangyiwen 
Reviewed-by: Joseph Qi 
Cc: Mark Fasheh 
Cc: Joel Becker 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds