Anatoly reports another squashfs fuzzing issue, where the decompression
parameters themselves are in a compressed block.

This causes squashfs_read_data() to be called in order to read the
decompression options before the decompression stream having been set
up, making squashfs go sideways.

Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Acked-by: Phillip Lougher <phillip.lougher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Nothing in fs.h should require blk_types.h to be included.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

This has ll_rw_block users pass in the operation and flags separately,
so ll_rw_block can setup the bio op and bi_rw flags on the bio that
is submitted.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.

This promise never materialized.  And unlikely will.

We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE.  And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.

Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.

Let's stop pretending that pages in page cache are special.  They are
not.

The changes are pretty straight-forward:

 - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};

 - page_cache_get() -> get_page();

 - page_cache_release() -> put_page();

This patch contains automated changes generated with coccinelle using
script below.  For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.

The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.

There are few places in the code where coccinelle didn't reach.  I'll
fix them manually in a separate patch.  Comments and documentation also
will be addressed with the separate patch.

virtual patch

@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT

@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE

@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK

@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)

@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)

@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Further generalise the decompressors by adding a page handler
abstraction.  This adds helpers to allow the decompressors
to access and process the output buffers in an implementation
independant manner.

This allows different types of output buffer to be passed
to the decompressors, with the implementation specific
aspects handled at decompression time, but without the
knowledge being held in the decompressor wrapper code.

This will allow the decompressors to handle Squashfs
cache buffers, and page cache pages.

This patch adds the abstraction and an implementation for
the caches.

Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reviewed-by: Minchan Kim <minchan@kernel.org>

The decompressor interface and code was written from
the point of view of single-threaded operation.  In doing
so it mixed a lot of single-threaded implementation specific
aspects into the decompressor code and elsewhere which makes it
difficult to seamlessly support multiple different decompressor
implementations.

This patch does the following:

1.  It removes compressor_options parsing from the decompressor
    init() function.  This allows the decompressor init() function
    to be dynamically called to instantiate multiple decompressors,
    without the compressor options needing to be read and parsed each
    time.

2.  It moves threading and all sleeping operations out of the
    decompressors.  In doing so, it makes the decompressors
    non-blocking wrappers which only deal with interfacing with
    the decompressor implementation.

3. It splits decompressor.[ch] into decompressor generic functions
   in decompressor.[ch], and moves the single threaded
   decompressor implementation into decompressor_single.c.

The result of this patch is Squashfs should now be able to
support multiple decompressors by adding new decompressor_xxx.c
files with specialised implementations of the functions in
decompressor_single.c

Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reviewed-by: Minchan Kim <minchan@kernel.org>

Merged the two for loops. We might get a little gain by overlapping
wait_on_bh and the memcpy operations.

Signed-off-by: Manish Sharma <manishrma@gmail.com>
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>

Comment was written when Squashfs only supported zlib compression.
This comment is now misleading given Squashfs supports other
compression algorithms.

Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>

My existing email address may stop working in a month or two, so update
email to one that will continue working.

Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>

Fix potential use of uninitialised variable caused by recent
decompressor code optimisations.

In zlib_uncompress (zlib_wrapper.c) we have

	int zlib_err, zlib_init = 0;
	...
	do {
		...
			if (avail == 0) {
				offset = 0;
				put_bh(bh[k++]);
				continue;
			}
		...
		zlib_err = zlib_inflate(stream, Z_SYNC_FLUSH);
		...
	} while (zlib_err == Z_OK);

If continue is executed (avail == 0) then the while condition will be
evaluated testing zlib_err, which is uninitialised first time around the
loop.

Fix this by getting rid of the 'if (avail == 0)' condition test, this
edge condition should not be being handled in the decompressor code, and
instead handle it generically in the caller code.

Similarly for xz_wrapper.c.

Incidentally, on most architectures (bar Mips and Parisc), no
uninitialised variable warning is generated by gcc, this is because the
while condition test on continue is optimised out and not performed
(when executing continue zlib_err has not been changed since entering
the loop, and logically if the while condition was true previously, then
it's still true).

Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
Reported-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>