linux-toradex.git/fs, branch v3.14.49

hpfs: hpfs_error: Remove static buffer, use vsprintf extension %pV instead

2015-08-03T16:29:59+00:00

commit a28e4b2b18ccb90df402da3f21e1a83c9d4f8ec1 upstream.

Removing unnecessary static buffers is good.
Use the vsprintf %pV extension instead.

Signed-off-by: Joe Perches 
Signed-off-by: Mikulas Patocka 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

9p: don't leave a half-initialized inode sitting around

2015-08-03T16:29:59+00:00

commit 0a73d0a204a4a04a1e110539c5a524ae51f91d6d upstream.

Signed-off-by: Al Viro 
Signed-off-by: Greg Kroah-Hartman

fixing infinite OPEN loop in 4.0 stateid recovery

2015-08-03T16:29:58+00:00

commit e8d975e73e5fa05f983fbf2723120edcf68e0b38 upstream.

Problem: When an operation like WRITE receives a BAD_STATEID, even though
recovery code clears the RECLAIM_NOGRACE recovery flag before recovering
the open state, because of clearing delegation state for the associated
inode, nfs_inode_find_state_and_recover() gets called and it makes the
same state with RECLAIM_NOGRACE flag again. As a results, when we restart
looking over the open states, we end up in the infinite loop instead of
breaking out in the next test of state flags.

Solution: unset the RECLAIM_NOGRACE set because of
calling of nfs_inode_find_state_and_recover() after returning from calling
recover_open() function.

Signed-off-by: Olga Kornievskaia 
Signed-off-by: Trond Myklebust 
Signed-off-by: Greg Kroah-Hartman

NFS: Fix size of NFSACL SETACL operations

2015-08-03T16:29:58+00:00

commit d683cc49daf7c5afca8cd9654aaa1bf63cdf2ad9 upstream.

When encoding the NFSACL SETACL operation, reserve just the estimated
size of the ACL rather than a fixed maximum. This eliminates needless
zero padding on the wire that the server ignores.

Fixes: ee5dc7732bd5 ('NFS: Fix "kernel BUG at fs/nfs/nfs3xdr.c:1338!"')
Signed-off-by: Chuck Lever 
Signed-off-by: Trond Myklebust 
Signed-off-by: Greg Kroah-Hartman

block: Do a full clone when splitting discard bios

2015-08-03T16:29:58+00:00

commit f3f5da624e0a891c34d8cd513c57f1d9b0c7dadc upstream.

This fixes a data corruption bug when using discard on top of MD linear,
raid0 and raid10 personalities.

Commit 20d0189b1012 "block: Introduce new bio_split()" permits sharing
the bio_vec between the two resulting bios. That is fine for read/write
requests where the bio_vec is immutable. For discards, however, we need
to be able to attach a payload and update the bio_vec so the page can
get mapped to a scatterlist entry. Therefore the bio_vec can not be
shared when splitting discards and we must do a full clone.

Signed-off-by: Martin K. Petersen 
Reported-by: Seunguk Shin 
Tested-by: Seunguk Shin 
Cc: Seunguk Shin 
Cc: Jens Axboe 
Cc: Kent Overstreet 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

fuse: initialize fc->release before calling it

2015-08-03T16:29:57+00:00

commit 0ad0b3255a08020eaf50e34ef0d6df5bdf5e09ed upstream.

fc->release is called from fuse_conn_put() which was used in the error
cleanup before fc->release was initialized.

[Jeremiah Mahler : assign fc->release after calling
fuse_conn_init(fc) instead of before.]

Signed-off-by: Miklos Szeredi 
Fixes: a325f9b92273 ("fuse: update fuse_conn_init() and separate out fuse_conn_kill()")
Signed-off-by: Greg Kroah-Hartman

Btrfs: fix memory leak in the extent_same ioctl

2015-08-03T16:29:57+00:00

commit 497b4050e0eacd4c746dd396d14916b1e669849d upstream.

We were allocating memory with memdup_user() but we were never releasing
that memory. This affected pretty much every call to the ioctl, whether
it deduplicated extents or not.

This issue was reported on IRC by Julian Taylor and on the mailing list
by Marcel Ritter, credit goes to them for finding the issue.

Reported-by: Julian Taylor 
Reported-by: Marcel Ritter 
Signed-off-by: Filipe Manana 
Reviewed-by: Mark Fasheh 
Signed-off-by: Greg Kroah-Hartman

Btrfs: use kmem_cache_free when freeing entry in inode cache

2015-08-03T16:29:57+00:00

commit c3f4a1685bb87e59c886ee68f7967eae07d4dffa upstream.

The free space entries are allocated using kmem_cache_zalloc(),
through __btrfs_add_free_space(), therefore we should use
kmem_cache_free() and not kfree() to avoid any confusion and
any potential problem. Looking at the kfree() definition at
mm/slab.c it has the following comment:

  /*
   * (...)
   *
   * Don't free memory not originally allocated by kmalloc()
   * or you will run into trouble.
   */

So better be safe and use kmem_cache_free().

Signed-off-by: Filipe Manana 
Reviewed-by: David Sterba 
Signed-off-by: Chris Mason 
Signed-off-by: Greg Kroah-Hartman

xfs: fix remote symlinks on V5/CRC filesystems

2015-08-03T16:29:56+00:00

commit 2ac56d3d4bd625450a54d4c3f9292d58f6b88232 upstream.

If we create a CRC filesystem, mount it, and create a symlink with
a path long enough that it can't live in the inode, we get a very
strange result upon remount:

# ls -l mnt
total 4
lrwxrwxrwx. 1 root root 929 Jun 15 16:58 link -> XSLM

XSLM is the V5 symlink block header magic (which happens to be
followed by a NUL, so the string looks terminated).

xfs_readlink_bmap() advanced cur_chunk by the size of the header
for CRC filesystems, but never actually used that pointer; it
kept reading from bp->b_addr, which is the start of the block,
rather than the start of the symlink data after the header.

Looks like this problem goes back to v3.10.

Fixing this gets us reading the proper link target, again.

Signed-off-by: Eric Sandeen 
Reviewed-by: Dave Chinner 
Signed-off-by: Dave Chinner 
Signed-off-by: Greg Kroah-Hartman

jbd2: fix ocfs2 corrupt when updating journal superblock fails

2015-08-03T16:29:53+00:00

commit 6f6a6fda294506dfe0e3e0a253bb2d2923f28f0a upstream.

If updating journal superblock fails after journal data has been
flushed, the error is omitted and this will mislead the caller as a
normal case.  In ocfs2, the checkpoint will be treated successfully
and the other node can get the lock to update. Since the sb_start is
still pointing to the old log block, it will rewrite the journal data
during journal recovery by the other node. Thus the new updates will
be overwritten and ocfs2 corrupts.  So in above case we have to return
the error, and ocfs2_commit_cache will take care of the error and
prevent the other node to do update first.  And only after recovering
journal it can do the new updates.

The issue discussion mail can be found at:
https://oss.oracle.com/pipermail/ocfs2-devel/2015-June/010856.html
http://comments.gmane.org/gmane.comp.file-systems.ext4/48841

[ Fixed bug in patch which allowed a non-negative error return from
  jbd2_cleanup_journal_tail() to leak out of jbd2_fjournal_flush(); this
  was causing xfstests ext4/306 to fail. -- Ted ]

Reported-by: Yiwen Jiang 
Signed-off-by: Joseph Qi 
Signed-off-by: Theodore Ts'o 
Tested-by: Yiwen Jiang 
Cc: Junxiao Bi 
Signed-off-by: Greg Kroah-Hartman