linux-toradex.git/fs, branch v3.14.57

btrfs: fix use after free iterating extrefs

2015-10-27T00:45:56+00:00

commit dc6c5fb3b514221f2e9d21ee626a9d95d3418dff upstream.

The code for btrfs inode-resolve has never worked properly for
files with enough hard links to trigger extrefs.  It was trying to
get the leaf out of a path after freeing the path:

	btrfs_release_path(path);
	leaf = path->nodes[0];
	item_size = btrfs_item_size_nr(leaf, slot);

The fix here is to use the extent buffer we cloned just a little higher
up to avoid deadlocks caused by using the leaf in the path.

Signed-off-by: Chris Mason 
cc: Mark Fasheh 
Reviewed-by: Filipe Manana 
Reviewed-by: Mark Fasheh 
Signed-off-by: Greg Kroah-Hartman

jbd2: avoid infinite loop when destroying aborted journal

2015-10-22T21:39:22+00:00

commit 841df7df196237ea63233f0f9eaa41db53afd70f upstream.

Commit 6f6a6fda2945 "jbd2: fix ocfs2 corrupt when updating journal
superblock fails" changed jbd2_cleanup_journal_tail() to return EIO
when the journal is aborted. That makes logic in
jbd2_log_do_checkpoint() bail out which is fine, except that
jbd2_journal_destroy() expects jbd2_log_do_checkpoint() to always make
a progress in cleaning the journal. Without it jbd2_journal_destroy()
just loops in an infinite loop.

Fix jbd2_journal_destroy() to cleanup journal checkpoint lists of
jbd2_log_do_checkpoint() fails with error.

Reported-by: Eryu Guan 
Tested-by: Eryu Guan 
Fixes: 6f6a6fda294506dfe0e3e0a253bb2d2923f28f0a
Signed-off-by: Jan Kara 
Signed-off-by: Theodore Ts'o 
Signed-off-by: Greg Kroah-Hartman

vfs: Test for and handle paths that are unreachable from their mnt_root

2015-10-22T21:39:21+00:00

commit 397d425dc26da728396e66d392d5dcb8dac30c37 upstream.

In rare cases a directory can be renamed out from under a bind mount.
In those cases without special handling it becomes possible to walk up
the directory tree to the root dentry of the filesystem and down
from the root dentry to every other file or directory on the filesystem.

Like division by zero .. from an unconnected path can not be given
a useful semantic as there is no predicting at which path component
the code will realize it is unconnected.  We certainly can not match
the current behavior as the current behavior is a security hole.

Therefore when encounting .. when following an unconnected path
return -ENOENT.

- Add a function path_connected to verify path->dentry is reachable
  from path->mnt.mnt_root.  AKA to validate that rename did not do
  something nasty to the bind mount.

  To avoid races path_connected must be called after following a path
  component to it's next path component.

Signed-off-by: "Eric W. Biederman" 
Signed-off-by: Al Viro 
Signed-off-by: Greg Kroah-Hartman

dcache: Handle escaped paths in prepend_path

2015-10-22T21:39:21+00:00

commit cde93be45a8a90d8c264c776fab63487b5038a65 upstream.

A rename can result in a dentry that by walking up d_parent
will never reach it's mnt_root.  For lack of a better term
I call this an escaped path.

prepend_path is called by four different functions __d_path,
d_absolute_path, d_path, and getcwd.

__d_path only wants to see paths are connected to the root it passes
in.  So __d_path needs prepend_path to return an error.

d_absolute_path similarly wants to see paths that are connected to
some root.  Escaped paths are not connected to any mnt_root so
d_absolute_path needs prepend_path to return an error greater
than 1.  So escaped paths will be treated like paths on lazily
unmounted mounts.

getcwd needs to prepend "(unreachable)" so getcwd also needs
prepend_path to return an error.

d_path is the interesting hold out.  d_path just wants to print
something, and does not care about the weird cases.  Which raises
the question what should be printed?

Given that / should result in -ENOENT I
believe it is desirable for escaped paths to be printed as empty
paths.  As there are not really any meaninful path components when
considered from the perspective of a mount tree.

So tweak prepend_path to return an empty path with an new error
code of 3 when it encounters an escaped path.

Signed-off-by: "Eric W. Biederman" 
Signed-off-by: Al Viro 
Signed-off-by: Greg Kroah-Hartman

cifs: use server timestamp for ntlmv2 authentication

2015-10-22T21:39:20+00:00

commit 98ce94c8df762d413b3ecb849e2b966b21606d04 upstream.

Linux cifs mount with ntlmssp against an Mac OS X (Yosemite
10.10.5) share fails in case the clocks differ more than +/-2h:

digest-service: digest-request: od failed with 2 proto=ntlmv2
digest-service: digest-request: kdc failed with -1561745592 proto=ntlmv2

Fix this by (re-)using the given server timestamp for the
ntlmv2 authentication (as Windows 7 does).

A related problem was also reported earlier by Namjae Jaen (see below):

Windows machine has extended security feature which refuse to allow
authentication when there is time difference between server time and
client time when ntlmv2 negotiation is used. This problem is prevalent
in embedded enviornment where system time is set to default 1970.

Modern servers send the server timestamp in the TargetInfo Av_Pair
structure in the challenge message [see MS-NLMP 2.2.2.1]
In [MS-NLMP 3.1.5.1.2] it is explicitly mentioned that the client must
use the server provided timestamp if present OR current time if it is
not

Reported-by: Namjae Jeon 
Signed-off-by: Peter Seiderer 
Signed-off-by: Steve French 
Signed-off-by: Greg Kroah-Hartman

disabling oplocks/leases via module parm enable_oplocks broken for SMB3

2015-10-22T21:39:19+00:00

commit e0ddde9d44e37fbc21ce893553094ecf1a633ab5 upstream.

leases (oplocks) were always requested for SMB2/SMB3 even when oplocks
disabled in the cifs.ko module.

Signed-off-by: Steve French 
Reviewed-by: Chandrika Srinivasan 
Signed-off-by: Greg Kroah-Hartman

Btrfs: update fix for read corruption of compressed and shared extents

2015-10-22T21:39:19+00:00

commit 808f80b46790f27e145c72112189d6a3be2bc884 upstream.

My previous fix in commit 005efedf2c7d ("Btrfs: fix read corruption of
compressed and shared extents") was effective only if the compressed
extents cover a file range with a length that is not a multiple of 16
pages. That's because the detection of when we reached a different range
of the file that shares the same compressed extent as the previously
processed range was done at extent_io.c:__do_contiguous_readpages(),
which covers subranges with a length up to 16 pages, because
extent_readpages() groups the pages in clusters no larger than 16 pages.
So fix this by tracking the start of the previously processed file
range's extent map at extent_readpages().

The following test case for fstests reproduces the issue:

  seq=`basename $0`
  seqres=$RESULT_DIR/$seq
  echo "QA output created by $seq"
  tmp=/tmp/$$
  status=1	# failure is the default!
  trap "_cleanup; exit \$status" 0 1 2 3 15

  _cleanup()
  {
      rm -f $tmp.*
  }

  # get standard environment, filters and checks
  . ./common/rc
  . ./common/filter

  # real QA test starts here
  _need_to_be_root
  _supported_fs btrfs
  _supported_os Linux
  _require_scratch
  _require_cloner

  rm -f $seqres.full

  test_clone_and_read_compressed_extent()
  {
      local mount_opts=$1

      _scratch_mkfs >>$seqres.full 2>&1
      _scratch_mount $mount_opts

      # Create our test file with a single extent of 64Kb that is going to
      # be compressed no matter which compression algo is used (zlib/lzo).
      $XFS_IO_PROG -f -c "pwrite -S 0xaa 0K 64K" \
          $SCRATCH_MNT/foo | _filter_xfs_io

      # Now clone the compressed extent into an adjacent file offset.
      $CLONER_PROG -s 0 -d $((64 * 1024)) -l $((64 * 1024)) \
          $SCRATCH_MNT/foo $SCRATCH_MNT/foo

      echo "File digest before unmount:"
      md5sum $SCRATCH_MNT/foo | _filter_scratch

      # Remount the fs or clear the page cache to trigger the bug in
      # btrfs. Because the extent has an uncompressed length that is a
      # multiple of 16 pages, all the pages belonging to the second range
      # of the file (64K to 128K), which points to the same extent as the
      # first range (0K to 64K), had their contents full of zeroes instead
      # of the byte 0xaa. This was a bug exclusively in the read path of
      # compressed extents, the correct data was stored on disk, btrfs
      # just failed to fill in the pages correctly.
      _scratch_remount

      echo "File digest after remount:"
      # Must match the digest we got before.
      md5sum $SCRATCH_MNT/foo | _filter_scratch
  }

  echo -e "\nTesting with zlib compression..."
  test_clone_and_read_compressed_extent "-o compress=zlib"

  _scratch_unmount

  echo -e "\nTesting with lzo compression..."
  test_clone_and_read_compressed_extent "-o compress=lzo"

  status=0
  exit

Signed-off-by: Filipe Manana 
Tested-by: Timofey Titovets 
Signed-off-by: Greg Kroah-Hartman

Btrfs: fix read corruption of compressed and shared extents

2015-10-22T21:39:19+00:00

commit 005efedf2c7d0a270ffbe28d8997b03844f3e3e7 upstream.

If a file has a range pointing to a compressed extent, followed by
another range that points to the same compressed extent and a read
operation attempts to read both ranges (either completely or part of
them), the pages that correspond to the second range are incorrectly
filled with zeroes.

Consider the following example:

  File layout
  [0 - 8K]                      [8K - 24K]
      |                             |
      |                             |
   points to extent X,         points to extent X,
   offset 4K, length of 8K     offset 0, length 16K

  [extent X, compressed length = 4K uncompressed length = 16K]

If a readpages() call spans the 2 ranges, a single bio to read the extent
is submitted - extent_io.c:submit_extent_page() would only create a new
bio to cover the second range pointing to the extent if the extent it
points to had a different logical address than the extent associated with
the first range. This has a consequence of the compressed read end io
handler (compression.c:end_compressed_bio_read()) finish once the extent
is decompressed into the pages covering the first range, leaving the
remaining pages (belonging to the second range) filled with zeroes (done
by compression.c:btrfs_clear_biovec_end()).

So fix this by submitting the current bio whenever we find a range
pointing to a compressed extent that was preceded by a range with a
different extent map. This is the simplest solution for this corner
case. Making the end io callback populate both ranges (or more, if we
have multiple pointing to the same extent) is a much more complex
solution since each bio is tightly coupled with a single extent map and
the extent maps associated to the ranges pointing to the shared extent
can have different offsets and lengths.

The following test case for fstests triggers the issue:

  seq=`basename $0`
  seqres=$RESULT_DIR/$seq
  echo "QA output created by $seq"
  tmp=/tmp/$$
  status=1	# failure is the default!
  trap "_cleanup; exit \$status" 0 1 2 3 15

  _cleanup()
  {
      rm -f $tmp.*
  }

  # get standard environment, filters and checks
  . ./common/rc
  . ./common/filter

  # real QA test starts here
  _need_to_be_root
  _supported_fs btrfs
  _supported_os Linux
  _require_scratch
  _require_cloner

  rm -f $seqres.full

  test_clone_and_read_compressed_extent()
  {
      local mount_opts=$1

      _scratch_mkfs >>$seqres.full 2>&1
      _scratch_mount $mount_opts

      # Create a test file with a single extent that is compressed (the
      # data we write into it is highly compressible no matter which
      # compression algorithm is used, zlib or lzo).
      $XFS_IO_PROG -f -c "pwrite -S 0xaa 0K 4K"        \
                      -c "pwrite -S 0xbb 4K 8K"        \
                      -c "pwrite -S 0xcc 12K 4K"       \
                      $SCRATCH_MNT/foo | _filter_xfs_io

      # Now clone our extent into an adjacent offset.
      $CLONER_PROG -s $((4 * 1024)) -d $((16 * 1024)) -l $((8 * 1024)) \
          $SCRATCH_MNT/foo $SCRATCH_MNT/foo

      # Same as before but for this file we clone the extent into a lower
      # file offset.
      $XFS_IO_PROG -f -c "pwrite -S 0xaa 8K 4K"         \
                      -c "pwrite -S 0xbb 12K 8K"        \
                      -c "pwrite -S 0xcc 20K 4K"        \
                      $SCRATCH_MNT/bar | _filter_xfs_io

      $CLONER_PROG -s $((12 * 1024)) -d 0 -l $((8 * 1024)) \
          $SCRATCH_MNT/bar $SCRATCH_MNT/bar

      echo "File digests before unmounting filesystem:"
      md5sum $SCRATCH_MNT/foo | _filter_scratch
      md5sum $SCRATCH_MNT/bar | _filter_scratch

      # Evicting the inode or clearing the page cache before reading
      # again the file would also trigger the bug - reads were returning
      # all bytes in the range corresponding to the second reference to
      # the extent with a value of 0, but the correct data was persisted
      # (it was a bug exclusively in the read path). The issue happened
      # only if the same readpages() call targeted pages belonging to the
      # first and second ranges that point to the same compressed extent.
      _scratch_remount

      echo "File digests after mounting filesystem again:"
      # Must match the same digests we got before.
      md5sum $SCRATCH_MNT/foo | _filter_scratch
      md5sum $SCRATCH_MNT/bar | _filter_scratch
  }

  echo -e "\nTesting with zlib compression..."
  test_clone_and_read_compressed_extent "-o compress=zlib"

  _scratch_unmount

  echo -e "\nTesting with lzo compression..."
  test_clone_and_read_compressed_extent "-o compress=lzo"

  status=0
  exit

Signed-off-by: Filipe Manana 
Reviewed-by: Qu Wenruo
Reviewed-by: Liu Bo 
Signed-off-by: Greg Kroah-Hartman

btrfs: skip waiting on ordered range for special files

2015-10-22T21:39:19+00:00

commit a30e577c96f59b1e1678ea5462432b09bf7d5cbc upstream.

In btrfs_evict_inode, we properly truncate the page cache for evicted
inodes but then we call btrfs_wait_ordered_range for every inode as well.
It's the right thing to do for regular files but results in incorrect
behavior for device inodes for block devices.

filemap_fdatawrite_range gets called with inode->i_mapping which gets
resolved to the block device inode before getting passed to
wbc_attach_fdatawrite_inode and ultimately to inode_to_bdi.  What happens
next depends on whether there's an open file handle associated with the
inode.  If there is, we write to the block device, which is unexpected
behavior.  If there isn't, we through normally and inode->i_data is used.
We can also end up racing against open/close which can result in crashes
when i_mapping points to a block device inode that has been closed.

Since there can't be any page cache associated with special file inodes,
it's safe to skip the btrfs_wait_ordered_range call entirely and avoid
the problem.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=100911
Tested-by: Christoph Biedl 
Signed-off-by: Jeff Mahoney 
Reviewed-by: Filipe Manana 
Signed-off-by: Greg Kroah-Hartman

udf: Check length of extended attributes and allocation descriptors

2015-10-01T09:36:26+00:00

commit 23b133bdc452aa441fcb9b82cbf6dd05cfd342d0 upstream.

Check length of extended attributes and allocation descriptors when
loading inodes from disk. Otherwise corrupted filesystems could confuse
the code and make the kernel oops.

This fixes CVE-2015-4167.

Reported-by: Carl Henrik Lunde 
Signed-off-by: Jan Kara 
[Use make_bad_inode() instead of branching due to older implementation.]
Signed-off-by: Chas Williams <3chas3@gmail.com>
Signed-off-by: Greg Kroah-Hartman