linux-toradex.git/fs, branch v3.4.47

btrfs: don't stop searching after encountering the wrong item

2013-05-24T18:14:22+00:00

commit 03b71c6ca6286625d8f1ed44aabab9b5bf5dac10 upstream.

The search ioctl skips items that are too large for a result buffer, but
inline items of a certain size occuring before any search result is
found would trigger an overflow and stop the search entirely.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=57641

Signed-off-by: Gabriel de Perthuis 
Signed-off-by: Josef Bacik 
Signed-off-by: Greg Kroah-Hartman

hugetlbfs: fix mmap failure in unaligned size request

2013-05-19T17:54:48+00:00

commit af73e4d9506d3b797509f3c030e7dcd554f7d9c4 upstream.

The current kernel returns -EINVAL unless a given mmap length is
"almost" hugepage aligned.  This is because in sys_mmap_pgoff() the
given length is passed to vm_mmap_pgoff() as it is without being aligned
with hugepage boundary.

This is a regression introduced in commit 40716e29243d ("hugetlbfs: fix
alignment of huge page requests"), where alignment code is pushed into
hugetlb_file_setup() and the variable len in caller side is not changed.

To fix this, this patch partially reverts that commit, and adds
alignment code in caller side.  And it also introduces hstate_sizelog()
in order to get proper hstate to specified hugepage size.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=56881

[akpm@linux-foundation.org: fix warning when CONFIG_HUGETLB_PAGE=n]
Signed-off-by: Naoya Horiguchi 
Signed-off-by: Johannes Weiner 
Reported-by: 
Cc: Steven Truelove 
Cc: Jianguo Wu 
Cc: Hugh Dickins 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Jianguo Wu 
Signed-off-by: Greg Kroah-Hartman

ext4: limit group search loop for non-extent files

2013-05-19T17:54:40+00:00

commit e6155736ad76b2070652745f9e54cdea3f0d8567 upstream.

In the case where we are allocating for a non-extent file,
we must limit the groups we allocate from to those below
2^32 blocks, and ext4_mb_regular_allocator() attempts to
do this initially by putting a cap on ngroups for the
subsequent search loop.

However, the initial target group comes in from the
allocation context (ac), and it may already be beyond
the artificially limited ngroups.  In this case,
the limit

	if (group == ngroups)
		group = 0;

at the top of the loop is never true, and the loop will
run away.

Catch this case inside the loop and reset the search to
start at group 0.

[sandeen@redhat.com: add commit msg & comments]

Signed-off-by: Lachlan McIlroy 
Signed-off-by: Eric Sandeen 
Signed-off-by: "Theodore Ts'o" 
Signed-off-by: Greg Kroah-Hartman

nfsd4: don't allow owner override on 4.1 CLAIM_FH opens

2013-05-19T17:54:38+00:00

commit 9f415eb25574db4b73a9a712a4438e41dc284922 upstream.

The Linux client is using CLAIM_FH to implement regular opens, not just
recovery cases, so it depends on the server to check permissions
correctly.

Therefore the owner override, which may make sense in the delegation
recovery case, isn't right in the CLAIM_FH case.

Symptoms: on a client with 49f9a0fafd844c32f2abada047c0b9a5ba0d6255
"NFSv4.1: Enable open-by-filehandle", Bryan noticed this:

	touch test.txt
	chmod 000 test.txt
	echo test > test.txt

succeeding.

Reported-by: Bryan Schumaker 
Signed-off-by: J. Bruce Fields 
Signed-off-by: Greg Kroah-Hartman

ext4: add check for inodes_count overflow in new resize ioctl

2013-05-11T20:48:09+00:00

commit 3f8a6411fbada1fa482276591e037f3b1adcf55b upstream.

Addresses-Red-Hat-Bugzilla: #913245

Reported-by: Eric Sandeen 
Signed-off-by: "Theodore Ts'o" 
Reviewed-by: Carlos Maiolino 
Signed-off-by: Lingzhu Xiang 
Signed-off-by: Greg Kroah-Hartman

autofs - remove autofs dentry mount check

2013-05-11T20:48:06+00:00

commit ce8a5dbdf9e709bdaf4618d7ef8cceb91e8adc69 upstream.

When checking if an autofs mount point is busy it isn't sufficient to
only check if it's a mount point.

For example, if the mount of an offset mountpoint in a tree is denied
for this host by its export and the dentry becomes a process working
directory the check incorrectly returns the mount as not in use at
expire.

This can happen since the default when mounting within a tree is
nostrict, which means ingnore mount fails on mounts within the tree and
continue.  The nostrict option is meant to allow mounting in this case.

Signed-off-by: David Jeffery 
Signed-off-by: Ian Kent 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

ext4: fix Kconfig documentation for CONFIG_EXT4_DEBUG

2013-05-08T02:51:57+00:00

commit 7f3e3c7cfcec148ccca9c0dd2dbfd7b00b7ac10f upstream.

Fox the Kconfig documentation for CONFIG_EXT4_DEBUG to match the
change made by commit a0b30c1229: ext4: use module parameters instead
of debugfs for mballoc_debug

Signed-off-by: "Theodore Ts'o" 
Signed-off-by: Greg Kroah-Hartman

ext4: fix online resizing for ext3-compat file systems

2013-05-08T02:51:57+00:00

commit c5c72d814cf0f650010337c73638b25e6d14d2d4 upstream.

Commit fb0a387dcdc restricts block allocations for indirect-mapped
files to block groups less than s_blockfile_groups.  However, the
online resizing code wasn't setting s_blockfile_groups, so the newly
added block groups were not available for non-extent mapped files.

Reported-by: Eric Sandeen 
Signed-off-by: "Theodore Ts'o" 
Signed-off-by: Greg Kroah-Hartman

ext4: fix journal callback list traversal

2013-05-08T02:51:57+00:00

commit 5d3ee20855e28169d711b394857ee608a5023094 upstream.

It is incorrect to use list_for_each_entry_safe() for journal callback
traversial because ->next may be removed by other task:
->ext4_mb_free_metadata()
  ->ext4_mb_free_metadata()
    ->ext4_journal_callback_del()

This results in the following issue:

WARNING: at lib/list_debug.c:62 __list_del_entry+0x1c0/0x250()
Hardware name:
list_del corruption. prev->next should be ffff88019a4ec198, but was 6b6b6b6b6b6b6b6b
Modules linked in: cpufreq_ondemand acpi_cpufreq freq_table mperf coretemp kvm_intel kvm crc32c_intel ghash_clmulni_intel microcode sg xhci_hcd button sd_mod crc_t10dif aesni_intel ablk_helper cryptd lrw aes_x86_64 xts gf128mul ahci libahci pata_acpi ata_generic dm_mirror dm_region_hash dm_log dm_mod
Pid: 16400, comm: jbd2/dm-1-8 Tainted: G        W    3.8.0-rc3+ #107
Call Trace:
 [] warn_slowpath_common+0xad/0xf0
 [] warn_slowpath_fmt+0x46/0x50
 [] ? ext4_journal_commit_callback+0x99/0xc0
 [] __list_del_entry+0x1c0/0x250
 [] ext4_journal_commit_callback+0x6f/0xc0
 [] jbd2_journal_commit_transaction+0x23a6/0x2570
 [] ? try_to_del_timer_sync+0x82/0xa0
 [] ? del_timer_sync+0x91/0x1e0
 [] kjournald2+0x19f/0x6a0
 [] ? wake_up_bit+0x40/0x40
 [] ? bit_spin_lock+0x80/0x80
 [] kthread+0x10e/0x120
 [] ? __init_kthread_worker+0x70/0x70
 [] ret_from_fork+0x7c/0xb0
 [] ? __init_kthread_worker+0x70/0x70

This patch fix the issue as follows:
- ext4_journal_commit_callback() make list truly traversial safe
  simply by always starting from list_head
- fix race between two ext4_journal_callback_del() and
  ext4_journal_callback_try_del()

Signed-off-by: Dmitry Monakhov 
Signed-off-by: "Theodore Ts'o" 
Reviewed-by: Jan Kara 
Signed-off-by: Greg Kroah-Hartman

jbd2: fix race between jbd2_journal_remove_checkpoint and ->j_commit_callback

2013-05-08T02:51:57+00:00

commit 794446c6946513c684d448205fbd76fa35f38b72 upstream.

The following race is possible:

[kjournald2]                              other_task
jbd2_journal_commit_transaction()
  j_state = T_FINISHED;
  spin_unlock(&journal->j_list_lock);
                                         ->jbd2_journal_remove_checkpoint()
					   ->jbd2_journal_free_transaction();
					     ->kmem_cache_free(transaction)
  ->j_commit_callback(journal, transaction);
    -> USE_AFTER_FREE

WARNING: at lib/list_debug.c:62 __list_del_entry+0x1c0/0x250()
Hardware name:
list_del corruption. prev->next should be ffff88019a4ec198, but was 6b6b6b6b6b6b6b6b
Modules linked in: cpufreq_ondemand acpi_cpufreq freq_table mperf coretemp kvm_intel kvm crc32c_intel ghash_clmulni_intel microcode sg xhci_hcd button sd_mod crc_t10dif aesni_intel ablk_helper cryptd lrw aes_x86_64 xts gf128mul ahci libahci pata_acpi ata_generic dm_mirror dm_region_hash dm_log dm_mod
Pid: 16400, comm: jbd2/dm-1-8 Tainted: G        W    3.8.0-rc3+ #107
Call Trace:
 [] warn_slowpath_common+0xad/0xf0
 [] warn_slowpath_fmt+0x46/0x50
 [] ? ext4_journal_commit_callback+0x99/0xc0
 [] __list_del_entry+0x1c0/0x250
 [] ext4_journal_commit_callback+0x6f/0xc0
 [] jbd2_journal_commit_transaction+0x23a6/0x2570
 [] ? try_to_del_timer_sync+0x82/0xa0
 [] ? del_timer_sync+0x91/0x1e0
 [] kjournald2+0x19f/0x6a0
 [] ? wake_up_bit+0x40/0x40
 [] ? bit_spin_lock+0x80/0x80
 [] kthread+0x10e/0x120
 [] ? __init_kthread_worker+0x70/0x70
 [] ret_from_fork+0x7c/0xb0
 [] ? __init_kthread_worker+0x70/0x70

In order to demonstrace this issue one should mount ext4 with mount -o
discard option on SSD disk.  This makes callback longer and race
window becomes wider.

In order to fix this we should mark transaction as finished only after
callbacks have completed

Signed-off-by: Dmitry Monakhov 
Signed-off-by: "Theodore Ts'o" 
Signed-off-by: Greg Kroah-Hartman