linux-toradex.git/fs, branch v3.4.85

Btrfs: fix data corruption when reading/updating compressed extents

2014-03-24T04:37:08+00:00

commit a2aa75e18a21b21952dc6daa9bac7c9f4426f81f upstream.

When using a mix of compressed file extents and prealloc extents, it
is possible to fill a page of a file with random, garbage data from
some unrelated previous use of the page, instead of a sequence of zeroes.

A simple sequence of steps to get into such case, taken from the test
case I made for xfstests, is:

   _scratch_mkfs
   _scratch_mount "-o compress-force=lzo"
   $XFS_IO_PROG -f -c "pwrite -S 0x06 -b 18670 266978 18670" $SCRATCH_MNT/foobar
   $XFS_IO_PROG -c "falloc 26450 665194" $SCRATCH_MNT/foobar
   $XFS_IO_PROG -c "truncate 542872" $SCRATCH_MNT/foobar
   $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foobar

This results in the following file items in the fs tree:

   item 4 key (257 INODE_ITEM 0) itemoff 15879 itemsize 160
       inode generation 6 transid 6 size 542872 block group 0 mode 100600
   item 5 key (257 INODE_REF 256) itemoff 15863 itemsize 16
       inode ref index 2 namelen 6 name: foobar
   item 6 key (257 EXTENT_DATA 0) itemoff 15810 itemsize 53
       extent data disk byte 0 nr 0 gen 6
       extent data offset 0 nr 24576 ram 266240
       extent compression 0
   item 7 key (257 EXTENT_DATA 24576) itemoff 15757 itemsize 53
       prealloc data disk byte 12849152 nr 241664 gen 6
       prealloc data offset 0 nr 241664
   item 8 key (257 EXTENT_DATA 266240) itemoff 15704 itemsize 53
       extent data disk byte 12845056 nr 4096 gen 6
       extent data offset 0 nr 20480 ram 20480
       extent compression 2
   item 9 key (257 EXTENT_DATA 286720) itemoff 15651 itemsize 53
       prealloc data disk byte 13090816 nr 405504 gen 6
       prealloc data offset 0 nr 258048

The on disk extent at offset 266240 (which corresponds to 1 single disk block),
contains 5 compressed chunks of file data. Each of the first 4 compress 4096
bytes of file data, while the last one only compresses 3024 bytes of file data.
Therefore a read into the file region [285648 ; 286720[ (length = 4096 - 3024 =
1072 bytes) should always return zeroes (our next extent is a prealloc one).

The solution here is the compression code path to zero the remaining (untouched)
bytes of the last page it uncompressed data into, as the information about how
much space the file data consumes in the last page is not known in the upper layer
fs/btrfs/extent_io.c:__do_readpage(). In __do_readpage we were correctly zeroing
the remainder of the page but only if it corresponds to the last page of the inode
and if the inode's size is not a multiple of the page size.

This would cause not only returning random data on reads, but also permanently
storing random data when updating parts of the region that should be zeroed.
For the example above, it means updating a single byte in the region [285648 ; 286720[
would store that byte correctly but also store random data on disk.

A test case for xfstests follows soon.

Signed-off-by: Filipe David Borba Manana 
Signed-off-by: Chris Mason 
Signed-off-by: Greg Kroah-Hartman

fs/proc/base.c: fix GPF in /proc/$PID/map_files

2014-03-24T04:37:06+00:00

commit 70335abb2689c8cd5df91bf2d95a65649addf50b upstream.

The expected logic of proc_map_files_get_link() is either to return 0
and initialize 'path' or return an error and leave 'path' uninitialized.

By the time dname_to_vma_addr() returns 0 the corresponding vma may have
already be gone.  In this case the path is not initialized but the
return value is still 0.  This results in 'general protection fault'
inside d_path().

Steps to reproduce:

  CONFIG_CHECKPOINT_RESTORE=y

    fd = open(...);
    while (1) {
        mmap(fd, ...);
        munmap(fd, ...);
    }

  ls -la /proc/$PID/map_files

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=68991

Signed-off-by: Artem Fetishev 
Signed-off-by: Aleksandr Terekhov 
Reported-by: 
Acked-by: Pavel Emelyanov 
Acked-by: Cyrill Gorcunov 
Reviewed-by: "Eric W. Biederman" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

NFS: Fix a delegation callback race

2014-03-24T04:37:06+00:00

commit 755a48a7a4eb05b9c8424e3017d947b2961a60e0 upstream.

The clean-up in commit 36281caa839f ended up removing a NULL pointer check
that is needed in order to prevent an Oops in
nfs_async_inode_return_delegation().

Reported-by: "Yan, Zheng" 
Link: http://lkml.kernel.org/r/5313E9F6.2020405@intel.com
Fixes: 36281caa839f (NFSv4: Further clean-ups of delegation stateid validation)
Signed-off-by: Trond Myklebust 
Signed-off-by: Greg Kroah-Hartman

ocfs2 syncs the wrong range...

2014-03-24T04:37:03+00:00

commit 1b56e98990bcdbb20b9fab163654b9315bf158e8 upstream.

Signed-off-by: Al Viro 
Signed-off-by: Greg Kroah-Hartman

ocfs2: fix quota file corruption

2014-03-24T04:37:03+00:00

commit 15c34a760630ca2c803848fba90ca0646a9907dd upstream.

Global quota files are accessed from different nodes.  Thus we cannot
cache offset of quota structure in the quota file after we drop our node
reference count to it because after that moment quota structure may be
freed and reallocated elsewhere by a different node resulting in
corruption of quota file.

Fix the problem by clearing dq_off when we are releasing dquot structure.
We also remove the DB_READ_B handling because it is useless -
DQ_ACTIVE_B is set iff DQ_READ_B is set.

Signed-off-by: Jan Kara 
Cc: Goldwyn Rodrigues 
Cc: Joel Becker 
Reviewed-by: Mark Fasheh 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

ext4: return ENOMEM if sb_getblk() fails

2014-03-11T23:10:06+00:00

commit 860d21e2c585f7ee8a4ecc06f474fdc33c9474f4 upstream.

The only reason for sb_getblk() failing is if it can't allocate the
buffer_head.  So ENOMEM is more appropriate than EIO.  In addition,
make sure that the file system is marked as being inconsistent if
sb_getblk() fails.

Signed-off-by: "Theodore Ts'o" 
[xr: Backported to 3.4:
 - Drop change to inline.c
 - Call to ext4_ext_check() from ext4_ext_find_extent() is conditional]
Signed-off-by: Rui Xiang 
Signed-off-by: Greg Kroah-Hartman

cifs: adjust sequence number downward after signing NT_CANCEL request

2014-03-11T23:10:05+00:00

commit 31efee60f489c759c341454d755a9fd13de8c03d upstream.

When a call goes out, the signing code adjusts the sequence number
upward by two to account for the request and the response. An NT_CANCEL
however doesn't get a response of its own, it just hurries the server
along to get it to respond to the original request more quickly.
Therefore, we must adjust the sequence number back down by one after
signing a NT_CANCEL request.

Reported-by: Tim Perry 
Signed-off-by: Jeff Layton 
Signed-off-by: Steve French 
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings 
Cc: Rui Xiang 
Signed-off-by: Greg Kroah-Hartman

ext4: fix possible use-after-free with AIO

2014-03-11T23:10:05+00:00

commit 091e26dfc156aeb3b73bc5c5f277e433ad39331c upstream.

Running AIO is pinning inode in memory using file reference. Once AIO
is completed using aio_complete(), file reference is put and inode can
be freed from memory. So we have to be sure that calling aio_complete()
is the last thing we do with the inode.

Reviewed-by: Carlos Maiolino 
Acked-by: Jeff Moyer 
Signed-off-by: Jan Kara 
Signed-off-by: "Theodore Ts'o" 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings 
Cc: Rui Xiang 
Signed-off-by: Greg Kroah-Hartman

UBIFS: fix double free of ubifs_orphan objects

2014-03-11T23:10:05+00:00

commit 8afd500cb52a5d00bab4525dd5a560d199f979b9 upstream.

The last orphan in the dnext list has its dnext set to NULL. Because
of that, ubifs_delete_orphan assumes that it is not on the dnext list
and frees it immediately instead ignoring it as a second delete. The
orphan is later freed again by erase_deleted.

This change adds an explicit flag to ubifs_orphan indicating whether
it is pending delete.

Signed-off-by: Adam Thomas 
Signed-off-by: Artem Bityutskiy 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings 
Cc: Rui Xiang 
Signed-off-by: Greg Kroah-Hartman

ext4/jbd2: don't wait (forever) for stale tid caused by wraparound

2014-03-11T23:10:05+00:00

commit d76a3a77113db020d9bb1e894822869410450bd9 upstream.

In the case where an inode has a very stale transaction id (tid) in
i_datasync_tid or i_sync_tid, it's possible that after a very large
(2**31) number of transactions, that the tid number space might wrap,
causing tid_geq()'s calculations to fail.

Commit deeeaf13 "jbd2: fix fsync() tid wraparound bug", later modified
by commit e7b04ac0 "jbd2: don't wake kjournald unnecessarily",
attempted to fix this problem, but it only avoided kjournald spinning
forever by fixing the logic in jbd2_log_start_commit().

Unfortunately, in the codepaths in fs/ext4/fsync.c and fs/ext4/inode.c
that might call jbd2_log_start_commit() with a stale tid, those
functions will subsequently call jbd2_log_wait_commit() with the same
stale tid, and then wait for a very long time.  To fix this, we
replace the calls to jbd2_log_start_commit() and
jbd2_log_wait_commit() with a call to a new function,
jbd2_complete_transaction(), which will correctly handle stale tid's.

As a bonus, jbd2_complete_transaction() will avoid locking
j_state_lock for writing unless a commit needs to be started.  This
should have a small (but probably not measurable) improvement for
ext4's scalability.

Signed-off-by: "Theodore Ts'o" 
Reported-by: Ben Hutchings 
Reported-by: George Barnett 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings 
Cc: Rui Xiang 
Signed-off-by: Greg Kroah-Hartman