linux-toradex.git/fs, branch v4.9.64

vfs: open() with O_CREAT should not create inodes with unknown ids

2017-11-08T09:08:36+00:00

[ Upstream commit 1328c727004d432bbdfba0ffa02a166df04c7305 ]

may_create() rejects creation of inodes with ids which lack a
mapping into s_user_ns. However for O_CREAT may_o_create() is
is used instead. Add a similar check there.

Fixes: 036d523641c6 ("vfs: Don't create inodes with a uid or gid unknown to the vfs")
Signed-off-by: Seth Forshee 
Signed-off-by: "Eric W. Biederman" 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ext4: do not use stripe_width if it is not set

2017-11-08T09:08:34+00:00

[ Upstream commit 5469d7c3087ecaf760f54b447f11af6061b7c897 ]

Avoid using stripe_width for sbi->s_stripe value if it is not actually
set. It prevents using the stride for sbi->s_stripe.

Signed-off-by: Jan Kara 
Signed-off-by: Theodore Ts'o 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ext4: fix stripe-unaligned allocations

2017-11-08T09:08:34+00:00

[ Upstream commit d9b22cf9f5466a057f2a4f1e642b469fa9d73117 ]

When a filesystem is created using:

	mkfs.ext4 -b 4096 -E stride=512 

and we try to allocate 64MB extent, we will end up directly in
ext4_mb_complex_scan_group(). This is because the request is detected
as power-of-two allocation (so we start in ext4_mb_regular_allocator()
with ac_criteria == 0) however the check before
ext4_mb_simple_scan_group() refuses the direct buddy scan because the
allocation request is too large. Since cr == 0, the check whether we
should use ext4_mb_scan_aligned() fails as well and we fall back to
ext4_mb_complex_scan_group().

Fix the problem by checking for upper limit on power-of-two requests
directly when detecting them.

Reported-by: Ross Zwisler 
Signed-off-by: Jan Kara 
Signed-off-by: Theodore Ts'o 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ocfs2: fstrim: Fix start offset of first cluster group during fstrim

2017-11-08T09:08:32+00:00

commit 105ddc93f06ebe3e553f58563d11ed63dbcd59f0 upstream.

The first cluster group descriptor is not stored at the start of the
group but at an offset from the start.  We need to take this into
account while doing fstrim on the first cluster group.  Otherwise we
will wrongly start fstrim a few blocks after the desired start block and
the range can cross over into the next cluster group and zero out the
group descriptor there.  This can cause filesytem corruption that cannot
be fixed by fsck.

Link: http://lkml.kernel.org/r/1507835579-7308-1-git-send-email-ashish.samant@oracle.com
Signed-off-by: Ashish Samant 
Reviewed-by: Junxiao Bi 
Reviewed-by: Joseph Qi 
Cc: Mark Fasheh 
Cc: Joel Becker 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

cifs: check MaxPathNameComponentLength != 0 before using it

2017-11-08T09:08:31+00:00

commit f74bc7c6679200a4a83156bb89cbf6c229fe8ec0 upstream.

And fix tcon leak in error path.

Signed-off-by: Ronnie Sahlberg 
Signed-off-by: Steve French 
Reviewed-by: David Disseldorp 
Signed-off-by: Greg Kroah-Hartman

ecryptfs: fix dereference of NULL user_key_payload

2017-11-02T08:49:15+00:00

commit f66665c09ab489a11ca490d6a82df57cfc1bea3e upstream.

In eCryptfs, we failed to verify that the authentication token keys are
not revoked before dereferencing their payloads, which is problematic
because the payload of a revoked key is NULL.  request_key() *does* skip
revoked keys, but there is still a window where the key can be revoked
before we acquire the key semaphore.

Fix it by updating ecryptfs_get_key_payload_data() to return
-EKEYREVOKED if the key payload is NULL.  For completeness we check this
for "encrypted" keys as well as "user" keys, although encrypted keys
cannot be revoked currently.

Alternatively we could use key_validate(), but since we'll also need to
fix ecryptfs_get_key_payload_data() to validate the payload length, it
seems appropriate to just check the payload pointer.

Fixes: 237fead61998 ("[PATCH] ecryptfs: fs/Makefile and fs/Kconfig")
Reviewed-by: James Morris 
Cc: Michael Halcrow 
Signed-off-by: Eric Biggers 
Signed-off-by: David Howells 
Signed-off-by: Greg Kroah-Hartman

fuse: fix READDIRPLUS skipping an entry

2017-11-02T08:49:13+00:00

commit c6cdd51404b7ac12dd95173ddfc548c59ecf037f upstream.

Marios Titas running a Haskell program noticed a problem with fuse's
readdirplus: when it is interrupted by a signal, it skips one directory
entry.

The reason is that fuse erronously updates ctx->pos after a failed
dir_emit().

The issue originates from the patch adding readdirplus support.

Reported-by: Jakob Unterwurzacher 
Tested-by: Marios Titas 
Signed-off-by: Miklos Szeredi 
Fixes: 0b05b18381ee ("fuse: implement NFS-like readdirplus support")
Signed-off-by: Greg Kroah-Hartman

ceph: unlock dangling spinlock in try_flush_caps()

2017-11-02T08:49:13+00:00

commit 6c2838fbdedb9b72a81c931d49e56b229b6cdbca upstream.

sparse warns:

  fs/ceph/caps.c:2042:9: warning: context imbalance in 'try_flush_caps' - wrong count at exit

We need to exit this function with the lock unlocked, but a couple of
cases leave it locked.

Signed-off-by: Jeff Layton 
Reviewed-by: "Yan, Zheng" 
Reviewed-by: Ilya Dryomov 
Signed-off-by: Ilya Dryomov 
Signed-off-by: Greg Kroah-Hartman

FS-Cache: fix dereference of NULL user_key_payload

2017-10-27T08:38:11+00:00

commit d124b2c53c7bee6569d2a2d0b18b4a1afde00134 upstream.

When the file /proc/fs/fscache/objects (available with
CONFIG_FSCACHE_OBJECT_LIST=y) is opened, we request a user key with
description "fscache:objlist", then access its payload.  However, a
revoked key has a NULL payload, and we failed to check for this.
request_key() *does* skip revoked keys, but there is still a window
where the key can be revoked before we access its payload.

Fix it by checking for a NULL payload, treating it like a key which was
already revoked at the time it was requested.

Fixes: 4fbf4291aa15 ("FS-Cache: Allow the current state of all objects to be dumped")
Reviewed-by: James Morris 
Signed-off-by: Eric Biggers 
Signed-off-by: David Howells 
Signed-off-by: Greg Kroah-Hartman

fscrypt: fix dereference of NULL user_key_payload

2017-10-27T08:38:10+00:00

commit d60b5b7854c3d135b869f74fb93eaf63cbb1991a upstream.

When an fscrypt-encrypted file is opened, we request the file's master
key from the keyrings service as a logon key, then access its payload.
However, a revoked key has a NULL payload, and we failed to check for
this.  request_key() *does* skip revoked keys, but there is still a
window where the key can be revoked before we acquire its semaphore.

Fix it by checking for a NULL payload, treating it like a key which was
already revoked at the time it was requested.

Fixes: 88bd6ccdcdd6 ("ext4 crypto: add encryption key management facilities")
Reviewed-by: James Morris 
Signed-off-by: Eric Biggers 
Signed-off-by: David Howells 
Signed-off-by: Greg Kroah-Hartman