The decrementation of acpi_device_bus_id->instance_no
in acpi_device_del() is incorrect, because it may cause
a duplicate instance number to be allocated next time
a device with the same acpi_device_bus_id is added.

Replace above mentioned approach by using IDA framework.

While at it, define the instance range to be [0, 4096).

Fixes: e49bd2dd5a50 ("ACPI: use PNPID:instance_no as bus_id of ACPI device")
Fixes: ca9dc8d42b30 ("ACPI / scan: Fix acpi_bus_id_list bookkeeping")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: 4.10+ <stable@vger.kernel.org> # 4.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull iommu updates from Joerg Roedel:

 - ARM SMMU and Mediatek updates from Will Deacon:
     - Support for MT8192 IOMMU from Mediatek
     - Arm v7s io-pgtable extensions for MT8192
     - Removal of TLBI_ON_MAP quirk
     - New Qualcomm compatible strings
     - Allow SVA without hardware broadcast TLB maintenance on SMMUv3
     - Virtualization Host Extension support for SMMUv3 (SVA)
     - Allow SMMUv3 PMU perf driver to be built independently from IOMMU

 - Some tidy-up in IOVA and core code

 - Conversion of the AMD IOMMU code to use the generic IO-page-table
   framework

 - Intel VT-d updates from Lu Baolu:
     - Audit capability consistency among different IOMMUs
     - Add SATC reporting structure support
     - Add iotlb_sync_map callback support

 - SDHI support for Renesas IOMMU driver

 - Misc cleanups and other small improvments

* tag 'iommu-updates-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (94 commits)
  iommu/amd: Fix performance counter initialization
  MAINTAINERS: repair file pattern in MEDIATEK IOMMU DRIVER
  iommu/mediatek: Fix error code in probe()
  iommu/mediatek: Fix unsigned domid comparison with less than zero
  iommu/vt-d: Parse SATC reporting structure
  iommu/vt-d: Add new enum value and structure for SATC
  iommu/vt-d: Add iotlb_sync_map callback
  iommu/vt-d: Move capability check code to cap_audit files
  iommu/vt-d: Audit IOMMU Capabilities and add helper functions
  iommu/vt-d: Fix 'physical' typos
  iommu: Properly pass gfp_t in _iommu_map() to avoid atomic sleeping
  iommu/vt-d: Fix compile error [-Werror=implicit-function-declaration]
  driver/perf: Remove ARM_SMMU_V3_PMU dependency on ARM_SMMU_V3
  MAINTAINERS: Add entry for MediaTek IOMMU
  iommu/mediatek: Add mt8192 support
  iommu/mediatek: Remove unnecessary check in attach_device
  iommu/mediatek: Support master use iova over 32bit
  iommu/mediatek: Add iova reserved function
  iommu/mediatek: Support for multi domains
  iommu/mediatek: Add get_domain_id from dev->dma_range_map
  ...

Pull media updates from Mauro Carvalho Chehab:

 - some core fixes in VB2 mem2mem support

 - some improvements and cleanups in V4L2 async kAPI

 - newer controls in V4L2 API for H-264 and HEVC codecs

 - allegro-dvt driver was promoted from staging

 - new i2c sendor drivers: imx334, ov5648, ov8865

 - new automobile camera module: rdacm21

 - ipu3 cio2 driver started gained support for some ACPI BIOSes

 - new ATSC frontend: MaxLinear mxl692 VSB tuner/demod

 - the SMIA/CCS driver gained more support for CSS standard

 - several driver fixes, updates and improvements

* tag 'media/v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (362 commits)
  media: v4l: async: Fix kerneldoc documentation for async functions
  media: i2c: max9271: Add MODULE_* macros
  media: i2c: Kconfig: Make MAX9271 a module
  media: imx334: 'ret' is uninitialized, should have been PTR_ERR()
  media: i2c: Add imx334 camera sensor driver
  media: dt-bindings: media: Add bindings for imx334
  media: ov8856: Configure sensor for GRBG Bayer for all modes
  media: i2c: imx219: Implement V4L2_CID_LINK_FREQ control
  media: ov5675: fix vflip/hflip control
  media: ipu3-cio2: Build bridge only if ACPI is enabled
  media: Remove the legacy v4l2-clk API
  media: ov6650: Use the generic clock framework
  media: mt9m111: Use the generic clock framework
  media: ov9640: Use the generic clock framework
  media: pxa_camera: Drop the v4l2-clk clock register
  media: mach-pxa: Register the camera sensor fixed-rate clock
  media: i2c: imx258: get clock from device properties and enable it via runtime PM
  media: i2c: imx258: simplify getting state container
  media: i2c: imx258: add support for binding via device tree
  media: dt-bindings: media: imx258: add bindings for IMX258 sensor
  ...

Pull Hyper-V updates from Wei Liu:

 - VMBus hardening patches from Andrea Parri and Andres Beltran.

 - Patches to make Linux boot as the root partition on Microsoft
   Hypervisor from Wei Liu.

 - One patch to add a new sysfs interface to support hibernation on
   Hyper-V from Dexuan Cui.

 - Two miscellaneous clean-up patches from Colin and Gustavo.

* tag 'hyperv-next-signed-20210216' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (31 commits)
  Revert "Drivers: hv: vmbus: Copy packets sent by Hyper-V out of the ring buffer"
  iommu/hyperv: setup an IO-APIC IRQ remapping domain for root partition
  x86/hyperv: implement an MSI domain for root partition
  asm-generic/hyperv: import data structures for mapping device interrupts
  asm-generic/hyperv: introduce hv_device_id and auxiliary structures
  asm-generic/hyperv: update hv_interrupt_entry
  asm-generic/hyperv: update hv_msi_entry
  x86/hyperv: implement and use hv_smp_prepare_cpus
  x86/hyperv: provide a bunch of helper functions
  ACPI / NUMA: add a stub function for node_to_pxm()
  x86/hyperv: handling hypercall page setup for root
  x86/hyperv: extract partition ID from Microsoft Hypervisor if necessary
  x86/hyperv: allocate output arg pages if required
  clocksource/hyperv: use MSR-based access if running as root
  Drivers: hv: vmbus: skip VMBus initialization if Linux is root
  x86/hyperv: detect if Linux is the root partition
  asm-generic/hyperv: change HV_CPU_POWER_MANAGEMENT to HV_CPU_MANAGEMENT
  hv: hyperv.h: Replace one-element array with flexible-array in struct icmsg_negotiate
  hv_netvsc: Restrict configurations on isolated guests
  Drivers: hv: vmbus: Enforce 'VMBus version >= 5.2' on isolated guests
  ...

* acpi-messages:
  ACPI: OSL: Clean up printing messages
  ACPI: OSL: Rework acpi_check_resource_conflict()
  ACPI: thermal: Clean up printing messages
  ACPI: video: Clean up printing messages
  ACPI: button: Clean up printing messages
  ACPI: battery: Clean up printing messages
  ACPI: AC: Clean up printing messages
  ACPI: bus: Drop ACPI_BUS_COMPONENT which is not used any more
  ACPI: utils: Clean up printing messages
  ACPI: scan: Clean up printing messages
  ACPI: bus: Clean up printing messages
  ACPI: PM: Clean up printing messages
  ACPI: power: Clean up printing messages

* acpi-misc:
  ACPI: Test for ACPI_SUCCESS rather than !ACPI_FAILURE
  ACPI: Use DEVICE_ATTR_<RW|RO|WO> macros

* acpi-cppc:
  ACPI: CPPC: initialise vaddr pointers to NULL
  ACPI: CPPC: add __iomem annotation to generic_comm_base pointer
  ACPI: CPPC: remove __iomem annotation for cpc_reg's address

* acpi-docs:
  Documentation: ACPI: add new rule for gpio-line-names

* acpi-config:
  ACPI: configfs: add missing check after configfs_register_default_group()

* acpi-apei:
  ACPI: APEI: ERST: remove unneeded semicolon
  ACPI: APEI: Add is_generic_error() to identify GHES sources

There is already a stub function for pxm_to_node but conversion to the
other direction is missing.

It will be used by Microsoft Hypervisor code later.

Signed-off-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/20210203150435.27941-9-wei.liu@kernel.org

Replace the ACPI_DEBUG_PRINT() instances in thermal.c with
acpi_handle_debug() calls and modify the ACPI_THERMAL_TRIPS_EXCEPTION()
macro in there to use acpi_handle_info() internally,  which among other
things causes the excessive log level of the messages printed by it to
be increased.

Drop the _COMPONENT and ACPI_MODULE_NAME() definitions that are not
used any more from thermal.c, drop the no longer needed
ACPI_THERMAL_COMPONENT definition from the headers and update the
documentation accordingly.

While at it, add a pr_fmt() definition to thermal.c, drop the PREFIX
definition from there and replace some pr_warn() calls with pr_info()
or acpi_handle_info() to reduce the excessive log level and (in the
latter case) facilitate easier identification of the message source.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>

Replace the ACPI_DEBUG_PRINT() instances in acpi_video.c with
acpi_handle_debug() calls and the ACPI_EXCEPTION()/ACPI_ERROR()/
ACPI_WARNING() instances in there with acpi_handle_info() calls,
which among other things causes the excessive log levels of those
messages to be increased.

Drop the _COMPONENT and ACPI_MODULE_NAME() definitions that are not
used any more from acpi_video.c, drop the no longer needed
ACPI_VIDEO_COMPONENT definition from the headers and update the
documentation accordingly.

While at it, add a pr_fmt() definition to acpi_video.c, replace the
direct printk() invocations in there with acpi_handle_info() or
pr_info() (and reduce the excessive log level where applicable) and
drop the PREFIX sybmbol definition which is not necessary any more
from acpi_video.c.

Also make unrelated janitorial changes to fix up white space and
use ACPI_FAILURE() instead of negating ACPI_SUCCESS().

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>

Replace the ACPI_DEBUG_PRINT() instance in button.c with an
acpi_handle_debug() call, drop the _COMPONENT and ACPI_MODULE_NAME()
definitions that are not used any more, drop the no longer needed
ACPI_BUTTON_COMPONENT definition from the headers and update the
documentation accordingly.

While at it, replace the direct printk() invocations with pr_info()
(that changes the excessive log level for some of them too) and drop
the unneeded PREFIX sybmbol definition from battery.c.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>