linux-toradex.git/include/asm-arm/arch-s3c2410, branch v2.6.14.2

[ARM] 3028/1: S3C2410 - add DCLK mask definitions

2005-10-20T22:21:20+00:00

Patch from Ben Dooks

From: Guillaume Gourat 

Add MASK definitions for DCLK0 and DCLK1

Signed-off-by: Guillaume Gourat 
Signed-off-by: Ben Dooks 
Signed-off-by: Russell King

[ARM] 3026/1: S3C2410 - avoid possible overflow in pll calculations

2005-10-20T22:21:18+00:00

Patch from Ben Dooks

Avoid the possiblity that if the board is using
a 16.9334 or higher crystal with a high PLL
multiplier, then the pll value could overflow
the capability of an int.

Also fix the value types of the intermediate
variables to unsigned int.

Rewrite of patch from Guillaume Gourat

Signed-off-by: Ben Dooks 
Signed-off-by: Russell King

[ARM] 3009/1: S3C2410 - io.h offsets too large for LDRH/STRH

2005-10-14T11:24:24+00:00

Patch from Ben Dooks

The __inwc/__outwc calls are capable of creating
LDRH and STRH instructions with offsets over 8bits
as GCC does not have a constraint for an 8bit
offset.

Signed-off-by: Ben Dooks 
Signed-off-by: Russell King

[ARM] 3005/1: S3C2440 - add definition for s3c2440_set_dsc() call in hardware.h

2005-10-13T15:46:35+00:00

Patch from Ben Dooks

include/asm-arm/arch-s3c2410/hardware.h was missing
the definition for s3c2440_set_dsc()

Signed-off-by: Ben Dooks 
Signed-off-by: Russell King

[ARM] 2934/1: Anubis - fix VA offsets for CPLD registers

2005-09-25T22:04:48+00:00

Patch from Ben Dooks

The VA addresses of the Anubis CPLD registers
confoict with the addresses for the ISA space
maps used by the rest of the s3c2410 architecture

Signed-off-by: Ben Dooks 
Signed-off-by: Russell King

[PATCH] s3c2410fb: ARM S3C2410 framebuffer driver

2005-09-09T21:03:42+00:00

This set of two patches add support for the framebuffer of the Samsung S3C2410
ARM SoC.  This driver was started about one year ago and is now used on iPAQ
h1930/h1940, Acer n30 and probably other s3c2410-based machines I'm not aware
of.  I've also heard yesterday that it's working also on iPAQ rx3715/rx3115
(s3c2440-based machines).

Signed-Off-By: Arnaud Patard 
Signed-off-by: Antonino Daplas 
Signed-off-by: Ben Dooks 
Cc: Russell King 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[ARM] 2889/1: S3C2410 - Add machine Anubis

2005-09-07T10:49:23+00:00

Patch from Ben Dooks

Add the Simtec Anubis to the list of supported
machines in the arch/arm/mach-s3c2410 directory.
This ensures the core peripherals are registered,
the timer source is configured and the correct
power-management is enabled.

Signed-off-by: Ben Dooks 
Signed-off-by: Russell King

[ARM] 2855/1: S3C2410 - add CLKSLOW definitions, and show in init

2005-08-29T21:46:30+00:00

Patch from Ben Dooks

Add the definitions for the S3C2410_CLKSLOW registers to
the header files, and show the values when the system
starts up

Signed-off-by: Ben Dooks 
Signed-off-by: Russell King

[PATCH] ARM: 2849/1: S3C24XX - USB host update (2848/1)

2005-08-10T15:45:14+00:00

Patch from Ben Dooks

Rename the s3c2410_report_oc() to s3c2410_usb_report_oc()
as this is an usb specific function.
Change port power on the usb-simtec implementation to only
power up the output if both are set, as per the usb 1.1
specification

Signed-off-by: Ben Dooks 
Signed-off-by: Russell King

[PATCH] ARM: 2819/1: Fix several S3C24x0 IIS defines

2005-07-26T18:20:25+00:00

Patch from Dimitry Andric

- Change S3C2440_IISCON_MPLL to S3C2440_IISMOD_MPLL:
  The S3C2440 IISCON register doesn\'t control the master clock selection, this is done with the IISMOD register.
- Correct S3C2410_IISMOD_256FS and S3C2410_IISMOD_384FS:
  This is set via bit 2 of IISMOD, not bit 1.
- Add S3C2410_IISCON_PSCEN (prescaler enable), for completeness\' sake.

Signed-off-by: Dimitry Andric 
Signed-off-by: Ben Dooks 
Signed-off-by: Russell King