Introduce hv_deposit_memory_node() and hv_deposit_memory() helper
functions to handle memory deposit with proper error handling.

The new hv_deposit_memory_node() function takes the hypervisor status
as a parameter and validates it before depositing pages. It checks for
HV_STATUS_INSUFFICIENT_MEMORY specifically and returns an error for
unexpected status codes.

This is a precursor patch to new out-of-memory error codes support.
No functional changes intended.

Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com>
Reviewed-by: Mukesh R <mrathor@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>

Replace direct comparisons of hv_result(status) against
HV_STATUS_INSUFFICIENT_MEMORY with a new hv_result_needs_memory() helper
function.

This improves code readability and provides a consistent and extendable
interface for checking out-of-memory conditions in hypercall results.

No functional changes intended.

Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com>
Reviewed-by: Mukesh R <mrathor@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>

hv_set_non_nested_msr() has special handling for SINT MSRs
when a paravisor is present. In addition to updating the MSR on the
host, the mirror MSR in the paravisor is updated, including with the
proxy bit. But with Confidential VMBus, the proxy bit must not be
used, so add a special case to skip it.

Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>

The existing Hyper-V wrappers for getting and setting MSRs are
hv_get/set_msr(). Via hv_get/set_non_nested_msr(), they detect
when running in a CoCo VM with a paravisor, and use the TDX or
SNP guest-host communication protocol to bypass the paravisor
and go directly to the host hypervisor for SynIC MSRs. The "set"
function also implements the required special handling for the
SINT MSRs.

Provide functions that allow manipulating the SynIC registers
through the paravisor. Move vmbus_signal_eom() to a more
appropriate location (which also avoids breaking KVM).

Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>

Confidential VMBus requires enabling paravisor SynIC, and
the x86_64 guest has to inspect the Virtualization Stack (VS)
CPUID leaf to see if Confidential VMBus is available. If it is,
the guest shall enable the paravisor SynIC.

Read the relevant data from the VS CPUID leaf. Refactor the
code to avoid repeating CPUID and add flags to the struct
ms_hyperv_info. For ARM64, the flag for Confidential VMBus
is not set which provides the desired behaviour for now as
it is not available on ARM64 just yet. Once ARM64 CCA guests
are supported, this flag will be set unconditionally when
running such a guest.

Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>

When Secure AVIC is enabled, VMBus driver should
call x2apic Secure AVIC interface to allow Hyper-V
to inject VMBus message interrupt.

Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>

When the MSHV_ROOT_HVCALL ioctl is executing a hypercall, and gets
HV_STATUS_INSUFFICIENT_MEMORY, it deposits memory and then returns
-EAGAIN to userspace. The expectation is that the VMM will retry.

However, some VMM code in the wild doesn't do this and simply fails.
Rather than force the VMM to retry, change the ioctl to deposit
memory on demand and immediately retry the hypercall as is done with
all the other hypercall helper functions.

In addition to making the ioctl easier to use, removing the need for
multiple syscalls improves performance.

There is a complication: unlike the other hypercall helper functions,
in MSHV_ROOT_HVCALL the input is opaque to the kernel. This is
problematic for rep hypercalls, because the next part of the input
list can't be copied on each loop after depositing pages (this was
the original reason for returning -EAGAIN in this case).

Introduce hv_do_rep_hypercall_ex(), which adds a 'rep_start'
parameter. This solves the issue, allowing the deposit loop in
MSHV_ROOT_HVCALL to restart a rep hypercall after depositing pages
partway through.

Fixes: 621191d709b1 ("Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs")
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>

At present VMBus driver is hinged off of CONFIG_HYPERV which entails
lot of builtin code and encompasses too much. It's not always clear
what depends on builtin hv code and what depends on VMBus. Setting
CONFIG_HYPERV as a module and fudging the Makefile to switch to builtin
adds even more confusion. VMBus is an independent module and should have
its own config option. Also, there are scenarios like baremetal dom0/root
where support is built in with CONFIG_HYPERV but without VMBus. Lastly,
there are more features coming down that use CONFIG_HYPERV and add more
dependencies on it.

So, create a fine grained HYPERV_VMBUS option and update Kconfigs for
dependency on VMBus.

Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>	# drivers/pci
Signed-off-by: Wei Liu <wei.liu@kernel.org>

Detect booting as an "L1VH" partition. This is a new scenario very
similar to root partition where the mshv_root driver can be used to
create and manage guest partitions.

It mostly works the same as root partition, but there are some
differences in how various features are handled. hv_l1vh_partition()
is introduced to handle these cases. Add hv_parent_partition()
which returns true for either case, replacing some hv_root_partition()
checks.

Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>

There are no users for those functions, remove them.

Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1746492997-4599-6-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1746492997-4599-6-git-send-email-longli@linuxonhyperv.com>