As reported, ever since commit 1013af4f585f ("mm/hugetlb: fix
huge_pmd_unshare() vs GUP-fast race") we can end up in some situations
where we perform so many IPI broadcasts when unsharing hugetlb PMD page
tables that it severely regresses some workloads.
In particular, when we fork()+exit(), or when we munmap() a large
area backed by many shared PMD tables, we perform one IPI broadcast per
unshared PMD table.
There are two optimizations to be had:
(1) When we process (unshare) multiple such PMD tables, such as during
exit(), it is sufficient to send a single IPI broadcast (as long as
we respect locking rules) instead of one per PMD table.
Locking prevents that any of these PMD tables could get reused before
we drop the lock.
(2) When we are not the last sharer (> 2 users including us), there is
no need to send the IPI broadcast. The shared PMD tables cannot
become exclusive (fully unshared) before an IPI will be broadcasted
by the last sharer.
Concurrent GUP-fast could walk into a PMD table just before we
unshared it. It could then succeed in grabbing a page from the
shared page table even after munmap() etc succeeded (and supressed
an IPI). But there is not difference compared to GUP-fast just
sleeping for a while after grabbing the page and re-enabling IRQs.
Most importantly, GUP-fast will never walk into page tables that are
no-longer shared, because the last sharer will issue an IPI
broadcast.
(if ever required, checking whether the PUD changed in GUP-fast
after grabbing the page like we do in the PTE case could handle
this)
So let's rework PMD sharing TLB flushing + IPI sync to use the mmu_gather
infrastructure so we can implement these optimizations and demystify the
code at least a bit. Extend the mmu_gather infrastructure to be able to
deal with our special hugetlb PMD table sharing implementation.
To make initialization of the mmu_gather easier when working on a single
VMA (in particular, when dealing with hugetlb), provide
tlb_gather_mmu_vma().
We'll consolidate the handling for (full) unsharing of PMD tables in
tlb_unshare_pmd_ptdesc() and tlb_flush_unshared_tables(), and track
in "struct mmu_gather" whether we had (full) unsharing of PMD tables.
Because locking is very special (concurrent unsharing+reuse must be
prevented), we disallow deferring flushing to tlb_finish_mmu() and instead
require an explicit earlier call to tlb_flush_unshared_tables().
From hugetlb code, we call huge_pmd_unshare_flush() where we make sure
that the expected lock protecting us from concurrent unsharing+reuse is
still held.
Check with a VM_WARN_ON_ONCE() in tlb_finish_mmu() that
tlb_flush_unshared_tables() was properly called earlier.
Document it all properly.
Notes about tlb_remove_table_sync_one() interaction with unsharing:
There are two fairly tricky things:
(1) tlb_remove_table_sync_one() is a NOP on architectures without
CONFIG_MMU_GATHER_RCU_TABLE_FREE.
Here, the assumption is that the previous TLB flush would send an
IPI to all relevant CPUs. Careful: some architectures like x86 only
send IPIs to all relevant CPUs when tlb->freed_tables is set.
The relevant architectures should be selecting
MMU_GATHER_RCU_TABLE_FREE, but x86 might not do that in stable
kernels and it might have been problematic before this patch.
Also, the arch flushing behavior (independent of IPIs) is different
when tlb->freed_tables is set. Do we have to enlighten them to also
take care of tlb->unshared_tables? So far we didn't care, so
hopefully we are fine. Of course, we could be setting
tlb->freed_tables as well, but that might then unnecessarily flush
too much, because the semantics of tlb->freed_tables are a bit
fuzzy.
This patch changes nothing in this regard.
(2) tlb_remove_table_sync_one() is not a NOP on architectures with
CONFIG_MMU_GATHER_RCU_TABLE_FREE that actually don't need a sync.
Take x86 as an example: in the common case (!pv, !X86_FEATURE_INVLPGB)
we still issue IPIs during TLB flushes and don't actually need the
second tlb_remove_table_sync_one().
This optimized can be implemented on top of this, by checking e.g., in
tlb_remove_table_sync_one() whether we really need IPIs. But as
described in (1), it really must honor tlb->freed_tables then to
send IPIs to all relevant CPUs.
Notes on TLB flushing changes:
(1) Flushing for non-shared PMD tables
We're converting from flush_hugetlb_tlb_range() to
tlb_remove_huge_tlb_entry(). Given that we properly initialize the
MMU gather in tlb_gather_mmu_vma() to be hugetlb aware, similar to
__unmap_hugepage_range(), that should be fine.
(2) Flushing for shared PMD tables
We're converting from various things (flush_hugetlb_tlb_range(),
tlb_flush_pmd_range(), flush_tlb_range()) to tlb_flush_pmd_range().
tlb_flush_pmd_range() achieves the same that
tlb_remove_huge_tlb_entry() would achieve in these scenarios.
Note that tlb_remove_huge_tlb_entry() also calls
__tlb_remove_tlb_entry(), however that is only implemented on
powerpc, which does not support PMD table sharing.
Similar to (1), tlb_gather_mmu_vma() should make sure that TLB
flushing keeps on working as expected.
Further, note that the ptdesc_pmd_pts_dec() in huge_pmd_share() is not a
concern, as we are holding the i_mmap_lock the whole time, preventing
concurrent unsharing. That ptdesc_pmd_pts_dec() usage will be removed
separately as a cleanup later.
There are plenty more cleanups to be had, but they have to wait until
this is fixed.
[david@kernel.org: fix kerneldoc]
Link: https://lkml.kernel.org/r/f223dd74-331c-412d-93fc-69e360a5006c@kernel.org
Link: https://lkml.kernel.org/r/20251223214037.580860-5-david@kernel.org
Fixes: 1013af4f585f ("mm/hugetlb: fix huge_pmd_unshare() vs GUP-fast race")
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reported-by: Uschakow, Stanislav" <suschako@amazon.de>
Closes: https://lore.kernel.org/all/4d3878531c76479d9f8ca9789dc6485d@amazon.de/
Tested-by: Laurence Oberman <loberman@redhat.com>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull hyperv updates from Wei Liu:
- Enhancements to Linux as the root partition for Microsoft Hypervisor:
- Support a new mode called L1VH, which allows Linux to drive the
hypervisor running the Azure Host directly
- Support for MSHV crash dump collection
- Allow Linux's memory management subsystem to better manage guest
memory regions
- Fix issues that prevented a clean shutdown of the whole system on
bare metal and nested configurations
- ARM64 support for the MSHV driver
- Various other bug fixes and cleanups
- Add support for Confidential VMBus for Linux guest on Hyper-V
- Secure AVIC support for Linux guests on Hyper-V
- Add the mshv_vtl driver to allow Linux to run as the secure kernel in
a higher virtual trust level for Hyper-V
* tag 'hyperv-next-signed-20251207' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (58 commits)
mshv: Cleanly shutdown root partition with MSHV
mshv: Use reboot notifier to configure sleep state
mshv: Add definitions for MSHV sleep state configuration
mshv: Add support for movable memory regions
mshv: Add refcount and locking to mem regions
mshv: Fix huge page handling in memory region traversal
mshv: Move region management to mshv_regions.c
mshv: Centralize guest memory region destruction
mshv: Refactor and rename memory region handling functions
mshv: adjust interrupt control structure for ARM64
Drivers: hv: use kmalloc_array() instead of kmalloc()
mshv: Add ioctl for self targeted passthrough hvcalls
Drivers: hv: Introduce mshv_vtl driver
Drivers: hv: Export some symbols for mshv_vtl
static_call: allow using STATIC_CALL_TRAMP_STR() from assembly
mshv: Extend create partition ioctl to support cpu features
mshv: Allow mappings that overlap in uaddr
mshv: Fix create memory region overlap check
mshv: add WQ_PERCPU to alloc_workqueue users
Drivers: hv: Use kmalloc_array() instead of kmalloc()
...
Pull UML updates from Johannes Berg: "Apart from the usual small churn, we have - initial SMP support (only kernel) - major vDSO cleanups (and fixes for 32-bit)" * tag 'uml-for-linux-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: (33 commits) um: Disable KASAN_INLINE when STATIC_LINK is selected um: Don't rename vmap to kernel_vmap um: drivers: virtio: use string choices helper um: Always set up AT_HWCAP and AT_PLATFORM x86/um: Remove FIXADDR_USER_START and FIXADDR_USE_END um: Remove __access_ok_vsyscall() um: Remove redundant range check from __access_ok_vsyscall() um: Remove fixaddr_user_init() x86/um: Drop gate area handling x86/um: Do not inherit vDSO from host um: Split out default elf_aux_hwcap x86/um: Move ELF_PLATFORM fallback to x86-specific code um: Split out default elf_aux_platform um: Avoid circular dependency on asm-offsets in pgtable.h um: Enable SMP support on x86 asm-generic: percpu: Add assembly guard um: vdso: Remove getcpu support on x86 um: Add initial SMP support um: Define timers on a per-CPU basis um: Determine sleep based on need_resched() ...
Pull MM updates from Andrew Morton:
"__vmalloc()/kvmalloc() and no-block support" (Uladzislau Rezki)
Rework the vmalloc() code to support non-blocking allocations
(GFP_ATOIC, GFP_NOWAIT)
"ksm: fix exec/fork inheritance" (xu xin)
Fix a rare case where the KSM MMF_VM_MERGE_ANY prctl state is not
inherited across fork/exec
"mm/zswap: misc cleanup of code and documentations" (SeongJae Park)
Some light maintenance work on the zswap code
"mm/page_owner: add debugfs files 'show_handles' and 'show_stacks_handles'" (Mauricio Faria de Oliveira)
Enhance the /sys/kernel/debug/page_owner debug feature by adding
unique identifiers to differentiate the various stack traces so
that userspace monitoring tools can better match stack traces over
time
"mm/page_alloc: pcp->batch cleanups" (Joshua Hahn)
Minor alterations to the page allocator's per-cpu-pages feature
"Improve UFFDIO_MOVE scalability by removing anon_vma lock" (Lokesh Gidra)
Address a scalability issue in userfaultfd's UFFDIO_MOVE operation
"kasan: cleanups for kasan_enabled() checks" (Sabyrzhan Tasbolatov)
"drivers/base/node: fold node register and unregister functions" (Donet Tom)
Clean up the NUMA node handling code a little
"mm: some optimizations for prot numa" (Kefeng Wang)
Cleanups and small optimizations to the NUMA allocation hinting
code
"mm/page_alloc: Batch callers of free_pcppages_bulk" (Joshua Hahn)
Address long lock hold times at boot on large machines. These were
causing (harmless) softlockup warnings
"optimize the logic for handling dirty file folios during reclaim" (Baolin Wang)
Remove some now-unnecessary work from page reclaim
"mm/damon: allow DAMOS auto-tuned for per-memcg per-node memory usage" (SeongJae Park)
Enhance the DAMOS auto-tuning feature
"mm/damon: fixes for address alignment issues in DAMON_LRU_SORT and DAMON_RECLAIM" (Quanmin Yan)
Fix DAMON_LRU_SORT and DAMON_RECLAIM with certain userspace
configuration
"expand mmap_prepare functionality, port more users" (Lorenzo Stoakes)
Enhance the new(ish) file_operations.mmap_prepare() method and port
additional callsites from the old ->mmap() over to ->mmap_prepare()
"Fix stale IOTLB entries for kernel address space" (Lu Baolu)
Fix a bug (and possible security issue on non-x86) in the IOMMU
code. In some situations the IOMMU could be left hanging onto a
stale kernel pagetable entry
"mm/huge_memory: cleanup __split_unmapped_folio()" (Wei Yang)
Clean up and optimize the folio splitting code
"mm, swap: misc cleanup and bugfix" (Kairui Song)
Some cleanups and a minor fix in the swap discard code
"mm/damon: misc documentation fixups" (SeongJae Park)
"mm/damon: support pin-point targets removal" (SeongJae Park)
Permit userspace to remove a specific monitoring target in the
middle of the current targets list
"mm: MISC follow-up patches for linux/pgalloc.h" (Harry Yoo)
A couple of cleanups related to mm header file inclusion
"mm/swapfile.c: select swap devices of default priority round robin" (Baoquan He)
improve the selection of swap devices for NUMA machines
"mm: Convert memory block states (MEM_*) macros to enums" (Israel Batista)
Change the memory block labels from macros to enums so they will
appear in kernel debug info
"ksm: perform a range-walk to jump over holes in break_ksm" (Pedro Demarchi Gomes)
Address an inefficiency when KSM unmerges an address range
"mm/damon/tests: fix memory bugs in kunit tests" (SeongJae Park)
Fix leaks and unhandled malloc() failures in DAMON userspace unit
tests
"some cleanups for pageout()" (Baolin Wang)
Clean up a couple of minor things in the page scanner's
writeback-for-eviction code
"mm/hugetlb: refactor sysfs/sysctl interfaces" (Hui Zhu)
Move hugetlb's sysfs/sysctl handling code into a new file
"introduce VM_MAYBE_GUARD and make it sticky" (Lorenzo Stoakes)
Make the VMA guard regions available in /proc/pid/smaps and
improves the mergeability of guarded VMAs
"mm: perform guard region install/remove under VMA lock" (Lorenzo Stoakes)
Reduce mmap lock contention for callers performing VMA guard region
operations
"vma_start_write_killable" (Matthew Wilcox)
Start work on permitting applications to be killed when they are
waiting on a read_lock on the VMA lock
"mm/damon/tests: add more tests for online parameters commit" (SeongJae Park)
Add additional userspace testing of DAMON's "commit" feature
"mm/damon: misc cleanups" (SeongJae Park)
"make VM_SOFTDIRTY a sticky VMA flag" (Lorenzo Stoakes)
Address the possible loss of a VMA's VM_SOFTDIRTY flag when that
VMA is merged with another
"mm: support device-private THP" (Balbir Singh)
Introduce support for Transparent Huge Page (THP) migration in zone
device-private memory
"Optimize folio split in memory failure" (Zi Yan)
"mm/huge_memory: Define split_type and consolidate split support checks" (Wei Yang)
Some more cleanups in the folio splitting code
"mm: remove is_swap_[pte, pmd]() + non-swap entries, introduce leaf entries" (Lorenzo Stoakes)
Clean up our handling of pagetable leaf entries by introducing the
concept of 'software leaf entries', of type softleaf_t
"reparent the THP split queue" (Muchun Song)
Reparent the THP split queue to its parent memcg. This is in
preparation for addressing the long-standing "dying memcg" problem,
wherein dead memcg's linger for too long, consuming memory
resources
"unify PMD scan results and remove redundant cleanup" (Wei Yang)
A little cleanup in the hugepage collapse code
"zram: introduce writeback bio batching" (Sergey Senozhatsky)
Improve zram writeback efficiency by introducing batched bio
writeback support
"memcg: cleanup the memcg stats interfaces" (Shakeel Butt)
Clean up our handling of the interrupt safety of some memcg stats
"make vmalloc gfp flags usage more apparent" (Vishal Moola)
Clean up vmalloc's handling of incoming GFP flags
"mm: Add soft-dirty and uffd-wp support for RISC-V" (Chunyan Zhang)
Teach soft dirty and userfaultfd write protect tracking to use
RISC-V's Svrsw60t59b extension
"mm: swap: small fixes and comment cleanups" (Youngjun Park)
Fix a small bug and clean up some of the swap code
"initial work on making VMA flags a bitmap" (Lorenzo Stoakes)
Start work on converting the vma struct's flags to a bitmap, so we
stop running out of them, especially on 32-bit
"mm/swapfile: fix and cleanup swap list iterations" (Youngjun Park)
Address a possible bug in the swap discard code and clean things
up a little
[ This merge also reverts commit ebb9aeb980e5 ("vfio/nvgrace-gpu:
register device memory for poison handling") because it looks
broken to me, I've asked for clarification - Linus ]
* tag 'mm-stable-2025-12-03-21-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
mm: fix vma_start_write_killable() signal handling
mm/swapfile: use plist_for_each_entry in __folio_throttle_swaprate
mm/swapfile: fix list iteration when next node is removed during discard
fs/proc/task_mmu.c: fix make_uffd_wp_huge_pte() huge pte handling
mm/kfence: add reboot notifier to disable KFENCE on shutdown
memcg: remove inc/dec_lruvec_kmem_state helpers
selftests/mm/uffd: initialize char variable to Null
mm: fix DEBUG_RODATA_TEST indentation in Kconfig
mm: introduce VMA flags bitmap type
tools/testing/vma: eliminate dependency on vma->__vm_flags
mm: simplify and rename mm flags function for clarity
mm: declare VMA flags by bit
zram: fix a spelling mistake
mm/page_alloc: optimize lowmem_reserve max lookup using its semantic monotonicity
mm/vmscan: skip increasing kswapd_failures when reclaim was boosted
pagemap: update BUDDY flag documentation
mm: swap: remove scan_swap_map_slots() references from comments
mm: swap: change swap_alloc_slow() to void
mm, swap: remove redundant comment for read_swap_cache_async
mm, swap: use SWP_SOLIDSTATE to determine if swap is rotational
...
Pull unused tracepoints update from Steven Rostedt:
"Detect unused tracepoints.
If a tracepoint is defined but never used (TRACE_EVENT() created but
no trace_<tracepoint>() called), it can take up to or more than 5K of
memory each. This can add up as there are around a hundred unused
tracepoints with various configs. That is 500K of wasted memory.
Add a make build parameter of "UT=1" to have the build warn if an
unused tracepoint is detected in the build. This allows detection of
unused tracepoints to be upstream so that outreachy and the mentoring
project can have new developers look for fixing them, without having
these warnings suddenly show up when someone upgrades their kernel.
When all known unused tracepoints are removed, then the "UT=1" build
parameter can be removed and unused tracepoints will always warn. This
will catch new unused tracepoints after the current ones have been
removed.
Summary:
- Separate out elf functions from sorttable.c
Move out the ELF parsing functions from sorttable.c so that the
tracing tooling can use it.
- Add a tracepoint verifier tool to the build process
If "UT=1" is added to the kernel command line, any unused
tracepoints will trigger a warning at build time.
- Do not warn about unused tracepoints for tracepoints that are
exported
There are sever cases where a tracepoint is created by the kernel
and used by modules. Since there's no easy way to detect if these
are truly unused since the users are in modules, if a tracepoint is
exported, assume it will eventually be used by a module. Note,
there's not many exported tracepoints so this should not be a
problem to ignore them.
- Have building of modules also detect unused tracepoints
Do not only check the main vmlinux for unused tracepoints, also
check modules. If a module is defining a tracepoint it should be
using it.
- Add the tracepoint-update program to the ignore file
The new tracepoint-update program needs to be ignored by git"
* tag 'tracepoints-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
scripts: add tracepoint-update to the list of ignores files
tracing: Add warnings for unused tracepoints for modules
tracing: Allow tracepoint-update.c to work with modules
tracepoint: Do not warn for unused event that is exported
tracing: Add a tracepoint verification check at build time
sorttable: Move ELF parsing into scripts/elf-parse.[ch]
Pull bpf updates from Alexei Starovoitov: - Convert selftests/bpf/test_tc_edt and test_tc_tunnel from .sh to test_progs runner (Alexis Lothoré) - Convert selftests/bpf/test_xsk to test_progs runner (Bastien Curutchet) - Replace bpf memory allocator with kmalloc_nolock() in bpf_local_storage (Amery Hung), and in bpf streams and range tree (Puranjay Mohan) - Introduce support for indirect jumps in BPF verifier and x86 JIT (Anton Protopopov) and arm64 JIT (Puranjay Mohan) - Remove runqslower bpf tool (Hoyeon Lee) - Fix corner cases in the verifier to close several syzbot reports (Eduard Zingerman, KaFai Wan) - Several improvements in deadlock detection in rqspinlock (Kumar Kartikeya Dwivedi) - Implement "jmp" mode for BPF trampoline and corresponding DYNAMIC_FTRACE_WITH_JMP. It improves "fexit" program type performance from 80 M/s to 136 M/s. With Steven's Ack. (Menglong Dong) - Add ability to test non-linear skbs in BPF_PROG_TEST_RUN (Paul Chaignon) - Do not let BPF_PROG_TEST_RUN emit invalid GSO types to stack (Daniel Borkmann) - Generalize buildid reader into bpf_dynptr (Mykyta Yatsenko) - Optimize bpf_map_update_elem() for map-in-map types (Ritesh Oedayrajsingh Varma) - Introduce overwrite mode for BPF ring buffer (Xu Kuohai) * tag 'bpf-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (169 commits) bpf: optimize bpf_map_update_elem() for map-in-map types bpf: make kprobe_multi_link_prog_run always_inline selftests/bpf: do not hardcode target rate in test_tc_edt BPF program selftests/bpf: remove test_tc_edt.sh selftests/bpf: integrate test_tc_edt into test_progs selftests/bpf: rename test_tc_edt.bpf.c section to expose program type selftests/bpf: Add success stats to rqspinlock stress test rqspinlock: Precede non-head waiter queueing with AA check rqspinlock: Disable spinning for trylock fallback rqspinlock: Use trylock fallback when per-CPU rqnode is busy rqspinlock: Perform AA checks immediately rqspinlock: Enclose lock/unlock within lock entry acquisitions bpf: Remove runqslower tool selftests/bpf: Remove usage of lsm/file_alloc_security in selftest bpf: Disable file_alloc_security hook bpf: check for insn arrays in check_ptr_alignment bpf: force BPF_F_RDONLY_PROG on insn array creation bpf: Fix exclusive map memory leak selftests/bpf: Make CS length configurable for rqspinlock stress test selftests/bpf: Add lock wait time stats to rqspinlock stress test ...
Pull rseq updates from Thomas Gleixner:
"A large overhaul of the restartable sequences and CID management:
The recent enablement of RSEQ in glibc resulted in regressions which
are caused by the related overhead. It turned out that the decision to
invoke the exit to user work was not really a decision. More or less
each context switch caused that. There is a long list of small issues
which sums up nicely and results in a 3-4% regression in I/O
benchmarks.
The other detail which caused issues due to extra work in context
switch and task migration is the CID (memory context ID) management.
It also requires to use a task work to consolidate the CID space,
which is executed in the context of an arbitrary task and results in
sporadic uncontrolled exit latencies.
The rewrite addresses this by:
- Removing deprecated and long unsupported functionality
- Moving the related data into dedicated data structures which are
optimized for fast path processing.
- Caching values so actual decisions can be made
- Replacing the current implementation with a optimized inlined
variant.
- Separating fast and slow path for architectures which use the
generic entry code, so that only fault and error handling goes into
the TIF_NOTIFY_RESUME handler.
- Rewriting the CID management so that it becomes mostly invisible in
the context switch path. That moves the work of switching modes
into the fork/exit path, which is a reasonable tradeoff. That work
is only required when a process creates more threads than the
cpuset it is allowed to run on or when enough threads exit after
that. An artificial thread pool benchmarks which triggers this did
not degrade, it actually improved significantly.
The main effect in migration heavy scenarios is that runqueue lock
held time and therefore contention goes down significantly"
* tag 'core-rseq-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
sched/mmcid: Switch over to the new mechanism
sched/mmcid: Implement deferred mode change
irqwork: Move data struct to a types header
sched/mmcid: Provide CID ownership mode fixup functions
sched/mmcid: Provide new scheduler CID mechanism
sched/mmcid: Introduce per task/CPU ownership infrastructure
sched/mmcid: Serialize sched_mm_cid_fork()/exit() with a mutex
sched/mmcid: Provide precomputed maximal value
sched/mmcid: Move initialization out of line
signal: Move MMCID exit out of sighand lock
sched/mmcid: Convert mm CID mask to a bitmap
cpumask: Cache num_possible_cpus()
sched/mmcid: Use cpumask_weighted_or()
cpumask: Introduce cpumask_weighted_or()
sched/mmcid: Prevent pointless work in mm_update_cpus_allowed()
sched/mmcid: Move scheduler code out of global header
sched: Fixup whitespace damage
sched/mmcid: Cacheline align MM CID storage
sched/mmcid: Use proper data structures
sched/mmcid: Revert the complex CID management
...
Pull bug handling infrastructure updates from Ingo Molnar:
"Core updates:
- Improve WARN(), which has vararg printf like arguments, to work
with the x86 #UD based WARN-optimizing infrastructure by hiding the
format in the bug_table and replacing this first argument with the
address of the bug-table entry, while making the actual function
that's called a UD1 instruction (Peter Zijlstra)
- Introduce the CONFIG_DEBUG_BUGVERBOSE_DETAILED Kconfig switch (Ingo
Molnar, s390 support by Heiko Carstens)
Fixes and cleanups:
- bugs/s390: Remove private WARN_ON() implementation (Heiko Carstens)
- <asm/bugs.h>: Make i386 use GENERIC_BUG_RELATIVE_POINTERS (Peter
Zijlstra)"
* tag 'core-bugs-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
x86/bugs: Make i386 use GENERIC_BUG_RELATIVE_POINTERS
x86/bug: Fix BUG_FORMAT vs KASLR
x86_64/bug: Inline the UD1
x86/bug: Implement WARN_ONCE()
x86_64/bug: Implement __WARN_printf()
x86/bug: Use BUG_FORMAT for DEBUG_BUGVERBOSE_DETAILED
x86/bug: Add BUG_FORMAT basics
bug: Allow architectures to provide __WARN_printf()
bug: Implement WARN_ON() using __WARN_FLAGS()
bug: Add report_bug_entry()
bug: Add BUG_FORMAT_ARGS infrastructure
bug: Clean up CONFIG_GENERIC_BUG_RELATIVE_POINTERS
bug: Add BUG_FORMAT infrastructure
x86: Rework __bug_table helpers
bugs/s390: Remove private WARN_ON() implementation
bugs/core: Reorganize fields in the first line of WARNING output, add ->comm[] output
bugs/sh: Concatenate 'cond_str' with '__FILE__' in __WARN_FLAGS(), to extend WARN_ON/BUG_ON output
bugs/parisc: Concatenate 'cond_str' with '__FILE__' in __WARN_FLAGS(), to extend WARN_ON/BUG_ON output
bugs/riscv: Concatenate 'cond_str' with '__FILE__' in __BUG_FLAGS(), to extend WARN_ON/BUG_ON output
bugs/riscv: Pass in 'cond_str' to __BUG_FLAGS()
...
Pull objtool updates from Ingo Molnar:
- klp-build livepatch module generation (Josh Poimboeuf)
Introduce new objtool features and a klp-build script to generate
livepatch modules using a source .patch as input.
This builds on concepts from the longstanding out-of-tree kpatch
project which began in 2012 and has been used for many years to
generate livepatch modules for production kernels. However, this is a
complete rewrite which incorporates hard-earned lessons from 12+
years of maintaining kpatch.
Key improvements compared to kpatch-build:
- Integrated with objtool: Leverages objtool's existing control-flow
graph analysis to help detect changed functions.
- Works on vmlinux.o: Supports late-linked objects, making it
compatible with LTO, IBT, and similar.
- Simplified code base: ~3k fewer lines of code.
- Upstream: No more out-of-tree #ifdef hacks, far less cruft.
- Cleaner internals: Vastly simplified logic for
symbol/section/reloc inclusion and special section extraction.
- Robust __LINE__ macro handling: Avoids false positive binary diffs
caused by the __LINE__ macro by introducing a fix-patch-lines
script which injects #line directives into the source .patch to
preserve the original line numbers at compile time.
- Disassemble code with libopcodes instead of running objdump
(Alexandre Chartre)
- Disassemble support (-d option to objtool) by Alexandre Chartre,
which supports the decoding of various Linux kernel code generation
specials such as alternatives:
17ef: sched_balance_find_dst_group+0x62f mov 0x34(%r9),%edx
17f3: sched_balance_find_dst_group+0x633 | <alternative.17f3> | X86_FEATURE_POPCNT
17f3: sched_balance_find_dst_group+0x633 | call 0x17f8 <__sw_hweight64> | popcnt %rdi,%rax
17f8: sched_balance_find_dst_group+0x638 cmp %eax,%edx
... jump table alternatives:
1895: sched_use_asym_prio+0x5 test $0x8,%ch
1898: sched_use_asym_prio+0x8 je 0x18a9 <sched_use_asym_prio+0x19>
189a: sched_use_asym_prio+0xa | <jump_table.189a> | JUMP
189a: sched_use_asym_prio+0xa | jmp 0x18ae <sched_use_asym_prio+0x1e> | nop2
189c: sched_use_asym_prio+0xc mov $0x1,%eax
18a1: sched_use_asym_prio+0x11 and $0x80,%ecx
... exception table alternatives:
native_read_msr:
5b80: native_read_msr+0x0 mov %edi,%ecx
5b82: native_read_msr+0x2 | <ex_table.5b82> | EXCEPTION
5b82: native_read_msr+0x2 | rdmsr | resume at 0x5b84 <native_read_msr+0x4>
5b84: native_read_msr+0x4 shl $0x20,%rdx
.... x86 feature flag decoding (also see the X86_FEATURE_POPCNT
example in sched_balance_find_dst_group() above):
2faaf: start_thread_common.constprop.0+0x1f jne 0x2fba4 <start_thread_common.constprop.0+0x114>
2fab5: start_thread_common.constprop.0+0x25 | <alternative.2fab5> | X86_FEATURE_ALWAYS | X86_BUG_NULL_SEG
2fab5: start_thread_common.constprop.0+0x25 | jmp 0x2faba <.altinstr_aux+0x2f4> | jmp 0x4b0 <start_thread_common.constprop.0+0x3f> | nop5
2faba: start_thread_common.constprop.0+0x2a mov $0x2b,%eax
... NOP sequence shortening:
1048e2: snapshot_write_finalize+0xc2 je 0x104917 <snapshot_write_finalize+0xf7>
1048e4: snapshot_write_finalize+0xc4 nop6
1048ea: snapshot_write_finalize+0xca nop11
1048f5: snapshot_write_finalize+0xd5 nop11
104900: snapshot_write_finalize+0xe0 mov %rax,%rcx
104903: snapshot_write_finalize+0xe3 mov 0x10(%rdx),%rax
... and much more.
- Function validation tracing support (Alexandre Chartre)
- Various -ffunction-sections fixes (Josh Poimboeuf)
- Clang AutoFDO (Automated Feedback-Directed Optimizations) support
(Josh Poimboeuf)
- Misc fixes and cleanups (Borislav Petkov, Chen Ni, Dylan Hatch, Ingo
Molnar, John Wang, Josh Poimboeuf, Pankaj Raghav, Peter Zijlstra,
Thorsten Blum)
* tag 'objtool-core-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits)
objtool: Fix segfault on unknown alternatives
objtool: Build with disassembly can fail when including bdf.h
objtool: Trim trailing NOPs in alternative
objtool: Add wide output for disassembly
objtool: Compact output for alternatives with one instruction
objtool: Improve naming of group alternatives
objtool: Add Function to get the name of a CPU feature
objtool: Provide access to feature and flags of group alternatives
objtool: Fix address references in alternatives
objtool: Disassemble jump table alternatives
objtool: Disassemble exception table alternatives
objtool: Print addresses with alternative instructions
objtool: Disassemble group alternatives
objtool: Print headers for alternatives
objtool: Preserve alternatives order
objtool: Add the --disas=<function-pattern> action
objtool: Do not validate IBT for .return_sites and .call_sites
objtool: Improve tracing of alternative instructions
objtool: Add functions to better name alternatives
objtool: Identify the different types of alternatives
...
Pull misc vfs updates from Christian Brauner:
"Features:
- Cheaper MAY_EXEC handling for path lookup. This elides MAY_WRITE
permission checks during path lookup and adds the
IOP_FASTPERM_MAY_EXEC flag so filesystems like btrfs can avoid
expensive permission work.
- Hide dentry_cache behind runtime const machinery.
- Add German Maglione as virtiofs co-maintainer.
Cleanups:
- Tidy up and inline step_into() and walk_component() for improved
code generation.
- Re-enable IOCB_NOWAIT writes to files. This refactors file
timestamp update logic, fixing a layering bypass in btrfs when
updating timestamps on device files and improving FMODE_NOCMTIME
handling in VFS now that nfsd started using it.
- Path lookup optimizations extracting slowpaths into dedicated
routines and adding branch prediction hints for mntput_no_expire(),
fd_install(), lookup_slow(), and various other hot paths.
- Enable clang's -fms-extensions flag, requiring a JFS rename to
avoid conflicts.
- Remove spurious exports in fs/file_attr.c.
- Stop duplicating union pipe_index declaration. This depends on the
shared kbuild branch that brings in -fms-extensions support which
is merged into this branch.
- Use MD5 library instead of crypto_shash in ecryptfs.
- Use largest_zero_folio() in iomap_dio_zero().
- Replace simple_strtol/strtoul with kstrtoint/kstrtouint in init and
initrd code.
- Various typo fixes.
Fixes:
- Fix emergency sync for btrfs. Btrfs requires an explicit sync_fs()
call with wait == 1 to commit super blocks. The emergency sync path
never passed this, leaving btrfs data uncommitted during emergency
sync.
- Use local kmap in watch_queue's post_one_notification().
- Add hint prints in sb_set_blocksize() for LBS dependency on THP"
* tag 'vfs-6.19-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (35 commits)
MAINTAINERS: add German Maglione as virtiofs co-maintainer
fs: inline step_into() and walk_component()
fs: tidy up step_into() & friends before inlining
orangefs: use inode_update_timestamps directly
btrfs: fix the comment on btrfs_update_time
btrfs: use vfs_utimes to update file timestamps
fs: export vfs_utimes
fs: lift the FMODE_NOCMTIME check into file_update_time_flags
fs: refactor file timestamp update logic
include/linux/fs.h: trivial fix: regualr -> regular
fs/splice.c: trivial fix: pipes -> pipe's
fs: mark lookup_slow() as noinline
fs: add predicts based on nd->depth
fs: move mntput_no_expire() slowpath into a dedicated routine
fs: remove spurious exports in fs/file_attr.c
watch_queue: Use local kmap in post_one_notification()
fs: touch up predicts in path lookup
fs: move fd_install() slowpath into a dedicated routine and provide commentary
fs: hide dentry_cache behind runtime const machinery
fs: touch predicts in do_dentry_open()
...