linux-toradex.git/include/asm-mips/sibyte, branch master

MIPS: Move headfiles to new location below arch/mips/include

2008-10-11T15:18:52+00:00

Signed-off-by: Ralf Baechle

[MIPS] Remove CONFIG_SIBYTE_PT{1120,1125,SWARM}

2008-01-29T10:14:58+00:00

According to Broadcom the PT systems are production test systems which
never reached customers so no need to keep the fragmentary support we
currently have.

Signed-off-by: Ralf Baechle

[MIPS] SMP: Call platform methods via ops structure.

2008-01-29T10:14:57+00:00

Signed-off-by: Ralf Baechle

[MIPS] time: SMP-proofing of Sibyte clockevent/clocksource code.

2007-10-22T21:09:00+00:00

The BCM148 has 4 cores but there are also just 4 generic timers available
so use the ZBbus cycle counter instead of it.  In addition the ZBbus
counter also offers a much higher resolution and 64-bit counting so I'm
considering a later complete conversion to it once I figure out if all
members of the Sibyte SOC family support it - the docs seem to agree but
the headers files seem to disagree ...

Signed-off-by: Ralf Baechle

[MIPS] checkfiles: Fix "need space after that ','" errors.

2007-10-11T22:46:15+00:00

Signed-off-by: Ralf Baechle

BCM1480 serial build fix

2007-09-12T00:21:19+00:00

Restores serial functionality for the BCM1480.

Signed-off-by: Thiemo Seufer 
Signed-off-by: Ralf Baechle 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

sb1250-duart.c: SB1250 DUART serial support

2007-07-17T17:23:03+00:00

This is a driver for the SB1250 DUART, a dual serial port implementation
included in the Broadcom family of SOCs descending from the SiByte SB1250
MIPS64 chip multiprocessor.  It is a new implementation replacing the
old-fashioned driver currently present in the linux-mips.org tree.  It
supports all the usual features one would expect from a(n asynchronous)
serial driver, including modem line control (as far as hardware supports it
-- there is edge detection logic missing from the DCD and RI lines and the
driver does not implement polling of these lines at the moment), the serial
console, BREAK transmission and reception, including the magic SysRq.  The
receive FIFO threshold is not maintained though.

The driver was tested with a SWARM board which uses a BCM1250 SOC (which is
dual MIPS64 CMP) and has both ports of the single DUART implemented wired
externally.  Both were tested.  Testing included using the ports as
terminal lines at 1200bps (which is the ports minimum), 115200bps and a
couple of random speeds inbetween.  The modem lines were verified to
operate correctly.  No testing was performed with a use as a network
interface, like with SLIP or PPP.

Signed-off-by: Maciej W. Rozycki 
Acked-by: Ralf Baechle 
Cc: Alan Cox 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[MIPS] Updated Sibyte headers

2007-04-27T15:20:24+00:00

This is an update to the earlier patch for the sibyte headers, and superceeds
the previous patch.  Changes were necessary to get the tbprof driver working
on the bcm1480.

Patch to update Sibyte header files to match master versions maintained
at Broadcom.  This patch also corrects some whitespace problems, and
(hopefully) shouldn't introduce any new ones.

Signed-off-by: Mark Mason 
Signed-off-by: Ralf Baechle

[MIPS] Add missing silicon revisions for BCM112x

2007-04-20T13:58:37+00:00

Recent versions of the BCM112X processors aren't recognized by Linux
(preventing Linux from booting on those processors).  This patch adds
support for those that are missing.

Signed-off-by: Mark Mason 
Signed-off-by: Ralf Baechle

[MIPS] SB1250: Fix bugs/warnings by creative use of volatile.

2007-03-24T17:01:50+00:00

Signed-off-by: Ralf Baechle