Pull drm updates from Dave Airlie:
"This is the main pull request for the drm for 4.3. Nouveau is
probably the biggest amount of changes in here, since it missed 4.2.
Highlights below, along with the usual bunch of fixes.
All stuff outside drm should have applicable acks.
Highlights:
- new drivers:
freescale dcu kms driver
- core:
more atomic fixes
disable some dri1 interfaces on kms drivers
drop fb panic handling, this was just getting more broken, as more locking was required.
new core fbdev Kconfig support - instead of each driver enable/disabling it
struct_mutex cleanups
- panel:
more new panels
cleanup Kconfig
- i915:
Skylake support enabled by default
legacy modesetting using atomic infrastructure
Skylake fixes
GEN9 workarounds
- amdgpu:
Fiji support
CGS support for amdgpu
Initial GPU scheduler - off by default
Lots of bug fixes and optimisations.
- radeon:
DP fixes
misc fixes
- amdkfd:
Add Carrizo support for amdkfd using amdgpu.
- nouveau:
long pending cleanup to complete driver,
fully bisectable which makes it larger,
perfmon work
more reclocking improvements
maxwell displayport fixes
- vmwgfx:
new DX device support, supports OpenGL 3.3
screen targets support
- mgag200:
G200eW support
G200e new revision support
- msm:
dragonboard 410c support, msm8x94 support, msm8x74v1 support
yuv format support
dma plane support
mdp5 rotation
initial hdcp
- sti:
atomic support
- exynos:
lots of cleanups
atomic modesetting/pageflipping support
render node support
- tegra:
tegra210 support (dc, dsi, dp/hdmi)
dpms with atomic modesetting support
- atmel:
support for 3 more atmel SoCs
new input formats, PRIME support.
- dwhdmi:
preparing to add audio support
- rockchip:
yuv plane support"
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1369 commits)
drm/amdgpu: rename gmc_v8_0_init_compute_vmid
drm/amdgpu: fix vce3 instance handling
drm/amdgpu: remove ib test for the second VCE Ring
drm/amdgpu: properly enable VM fault interrupts
drm/amdgpu: fix warning in scheduler
drm/amdgpu: fix buffer placement under memory pressure
drm/amdgpu/cz: fix cz_dpm_update_low_memory_pstate logic
drm/amdgpu: fix typo in dce11 watermark setup
drm/amdgpu: fix typo in dce10 watermark setup
drm/amdgpu: use top down allocation for non-CPU accessible vram
drm/amdgpu: be explicit about cpu vram access for driver BOs (v2)
drm/amdgpu: set MEC doorbell range for Fiji
drm/amdgpu: implement burst NOP for SDMA
drm/amdgpu: add insert_nop ring func and default implementation
drm/amdgpu: add amdgpu_get_sdma_instance helper function
drm/amdgpu: add AMDGPU_MAX_SDMA_INSTANCES
drm/amdgpu: add burst_nop flag for sdma
drm/amdgpu: add count field for the SDMA NOP packet v2
drm/amdgpu: use PT for VM sync on unmap
drm/amdgpu: make wait_event uninterruptible in push_job
...
The port_mst_index parameter was reserved for future use, but maintainers prefer to add it later when it is actually used. [Note: this is an update patch to commit [51e1d83cab99: drm/i915: Call audio pin/ELD notify function] where I mistakenly applied the older version. Jani and Daniel's review tags were to the latest version, so I add them below, too -- tiwai] Signed-off-by: David Henningsson <david.henningsson@canonical.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Takashi Iwai <tiwai@suse.de>
This callback will be called by the i915 driver to notify the hda driver that its HDMI information needs to be refreshed, i e, that audio output is now available (or unavailable) - usually as a result of a monitor being plugged in (or unplugged). Signed-off-by: David Henningsson <david.henningsson@canonical.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Here are some development updates for the Synopsis Designware HDMI driver, which clean up some of the code, and start preparing to add audio support to the driver. This series of patches are based on a couple of dependent commits from the ALSA tree. Briefly, the updates are: - move comments which should have moved with the phy values to the IMX part of the driver. - clean up the phy configuration: to all lookups before starting to program the phy. - clean up the HDMI clock regenerator code - use the drm_hdmi_avi_infoframe_from_display_mode() helper which allows the code to be subsequently simplified - remove the unused 'regmap' pointer in struct dw_hdmi - use the bridge drm device rather than the connector (we're the bridge code) - remove private hsync/vsync/interlaced flags, getting them from the DRM mode structure instead. - implement interface functions to support audio - setting the audio sample rate, and enabling the audio clocks. - removal of broken pixel repetition support - cleanup DVI vs HDMI sink handling - enable audio only if connected device supports audio - avoid double-enabling bridge in the sink path (once in mode_set, and again in commit) - rename mis-named dw_hdmi_phy_enable_power() - fix bridge enable/disable handing, so a plug-in event doesn't reconfigure the bridge if DRM has disabled the output - fix from Vladimir Zapolskiy for the I2CM_ADDRESS macro name These are primerily preparitory patches for the AHB audio driver and the I2S audio driver (from Rockchip) for this IP. * 'drm-dwhdmi-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: drm: bridge/dw_hdmi: fix register I2CM_ADDRESS register name drm: bridge/dw_hdmi: fix phy enable/disable handling drm: bridge/dw_hdmi: rename dw_hdmi_phy_enable_power() drm: bridge/dw_hdmi: avoid enabling interface in mode_set drm: bridge/dw_hdmi: enable audio only if sink supports audio drm: bridge/dw_hdmi: clean up HDMI vs DVI mode handling drm: bridge/dw_hdmi: don't support any pixel doubled modes drm: bridge/dw_hdmi: remove pixel repetition setting for all VICs drm: bridge/dw_hdmi: introduce interfaces to enable and disable audio drm: bridge/dw_hdmi: introduce interface to setting sample rate drm: bridge/dw_hdmi: remove mhsyncpolarity/mvsyncpolarity/minterlaced drm: bridge/dw_hdmi: use our own drm_device drm: bridge/dw_hdmi: remove unused 'regmap' struct member drm: bridge/dw_hdmi: simplify hdmi_config_AVI() a little drm: bridge/dw_hdmi: use drm_hdmi_avi_infoframe_from_display_mode() drm: bridge/dw_hdmi: clean up hdmi_set_clk_regenerator() drm: bridge/dw_hdmi: clean up phy configuration drm: imx/dw_hdmi: move phy comments drm/edid: add function to help find SADs
Linux 4.2-rc8 Backmerge required for Intel so they can fix their -next tree up properly.
It appears some MST docks are worse than other, but the only way to know is to see the sw revisions in here, so dump the branch OUI so we can look at the sw revision. v2: Thierry made me feel guilty, so I parsed the branch OUI. Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Add a function to find the start of the SADs in the ELD. This complements the helper to retrieve the SAD count. [airlied: this fixes a build problem with the alsa eld helper which required this]. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
iMX6 devices suffer from an errata (ERR005174) where the audio FIFO can be emptied while it is partially full, resulting in misalignment of the audio samples. To prevent this, the errata workaround recommends writing N as zero until the audio FIFO has been loaded by DMA. Writing N=0 prevents the HDMI bridge from reading from the audio FIFO, effectively disabling audio. This means we need to provide the audio driver with a pair of functions to enable/disable audio. These are dw_hdmi_audio_enable() and dw_hdmi_audio_disable(). A spinlock is introduced to ensure that setting the CTS/N values can't race, ensuring that the audio driver calling the enable/disable functions (which are called in an atomic context) can't race with a modeset. Tested-by: Yakir Yang <ykk@rock-chips.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Introduce dw_hdmi_set_sample_rate(), which allows us to configure the audio sample rate, setting the CTS/N values appropriately. Tested-by: Yakir Yang <ykk@rock-chips.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Add a function to find the start of the SADs in the ELD. This complements the helper to retrieve the SAD count. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>