linux-toradex.git/include/dt-bindings/iio, branch v5.15

dt-bindings: iio/adc: add an INGENIC_ADC_AUX0 entry

2021-07-31T17:14:53+00:00

The JZ4760(B) socs have 3 AUX inputs, add an entry to prepare including the one named AUX in the sadc driver.
Leaving the rest untouched as it's ABI.

Signed-off-by: Christophe Branchereau 

Reviewed-by: Paul Cercueil 
Acked-by: Rob Herring 
Link: https://lore.kernel.org/r/20210726082033.351533-3-cbranchereau@gmail.com
Signed-off-by: Jonathan Cameron

Merge branch 'ib-5.8-jz47xx-ts' into HEAD

2020-07-22T13:36:31+00:00

Immutable branch may be needed in input for a joystick set that is
dependent on it.

dt-bindings: iio/adc: Add touchscreen idx for JZ47xx SoC ADC

2020-07-20T09:27:46+00:00

Introduce support for touchscreen channels found in JZ47xx SoCs.

Signed-off-by: Artur Rojek 
Tested-by: Paul Cercueil 
Acked-by: Rob Herring 
Signed-off-by: Jonathan Cameron

iio: adc: Add PMIC7 ADC bindings

2020-06-14T10:49:18+00:00

Add documentation for PMIC7 ADC peripheral.
For the PMIC7-type PMICs, ADC peripheral is present in HW for the
following PMICs: PMK8350, PM8350, PM8350b, PMR735a and PMR735b.
Of these, only the ADC peripheral on PMK8350 is exposed directly to SW.
If SW needs to communicate with ADCs on other PMICs, it specifies the
PMIC to PMK8350 through the newly added SID register and communication
between PMK8350 ADC and other PMIC ADCs is carried out through
PBS(Programmable Boot Sequence) at the firmware level.

In addition, add definitions for ADC channels and virtual channel
definitions (combination of ADC channel number and PMIC SID number)
per PMIC, to be used by ADC clients for PMIC7.

Signed-off-by: Jishnu Prakash 
Reviewed-by: Amit Kucheria 
Reviewed-by: Rob Herring 
Signed-off-by: Jonathan Cameron

dt-bindings: iio/adc: Add AUX2 channel idx for JZ4770 SoC ADC

2019-09-08T12:23:44+00:00

Introduce support for AUX2 channel found in ADC hardware present on
Ingenic JZ4770 SoC.

Signed-off-by: Artur Rojek 
Reviewed-by: Rob Herring 
Signed-off-by: Jonathan Cameron

dt-bindings: iio/temperature: Add thermocouple types (and doc)

2019-04-04T19:21:01+00:00

This patch introduces common thermocouple types used by various
temperature sensors. Also a brief documentation explaining this
"thermocouple-type" property.

Signed-off-by: Patrick Havelange 
Signed-off-by: Jonathan Cameron

dt-bindings: iio/adc: Add bindings for Ingenic JZ47xx SoCs ADC.

2019-02-09T15:39:24+00:00

Add device tree bindings for the ADC controller on JZ47xx SoCs,
used by the ingenic-adc driver.

Signed-off-by: Artur Rojek 
Signed-off-by: Jonathan Cameron

iio: adc: Update QCOM ADC license to SPDX format

2018-08-18T17:11:46+00:00

Update QCOM ADC header file to SPDX format.

Signed-off-by: Siddartha Mohanadoss 
Reviewed-by: Rob Herring 
Signed-off-by: Jonathan Cameron

dt-bindings: iio: adc: Add DT binding document for PMIC5 ADC

2018-08-03T21:37:03+00:00

PMIC5 ADC has support for clients to measure voltage and current
on inputs connected to the PMIC. Clients include reading voltage
phone power and on board system thermistors for thermal management.
ADC5 on certain PMIC has support to read battery current.

This change adds documentation.

Signed-off-by: Siddartha Mohanadoss 
Reviewed-by: Rob Herring 
Signed-off-by: Jonathan Cameron

dt-bindings: iio: adc: at91-sama5d2_adc: add channel specific consumer info

2018-06-10T12:28:12+00:00

Added defines for channel consumer device-tree binding

Signed-off-by: Eugen Hristev 
Reviewed-by: Rob Herring 
Acked-by: Ludovic Desroches 
Signed-off-by: Jonathan Cameron