Pull clk updates from Stephen Boyd:
"Sort of on the quieter side this time, which is probably due more to
me not catching up as quickly on patch review than anything else.
Overall it seems normal though, a few small changes to the core,
mostly small non-critical fixes here and there as well as driver
updates for new and existing hardware support.
The biggest things are the TI clk driver rework to lay the groundwork
for clkctrl support in the next merge window and the AmLogic
audio/graphics clk support.
Core:
- clk_possible_parents debugfs file so we know which parents a clk
could possibly have
- Fix to make clk rate change notifiers stop on the first failure
instead of continuing
New Drivers:
- Mediatek MT6797 SoCs
- hi655x PMIC clks
- AmLogic Meson SoC i2s and spdif audio clks and Mali graphics clks
- Allwinner H5 SoCs and PRCM hardware
Updates:
- Nvidia Tegra T210 cleanups and non-critical fixes
- TI OMAP cleanups in preparation for clkctrl support
- trivial fixes like kcalloc(), devm_* conversions, and seq_puts()
- ZTE zx296718 SoC VGA clks
- Rockchip clk-ids, fixups, and rename of rk1108 to rv1108
- IDT VersaClock 5P49V5935 support
- Renesas R-Car H3 and M3-W IMR clks and ES2.0 rev of R-Car H3
support"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (151 commits)
clk: x86: pmc-atom: Checking for IS_ERR() instead of NULL
clk: ti: divider: try to fix ti_clk_register_divider
clk: mvebu: Use kcalloc() in two functions
clk: mvebu: Use kcalloc() in of_cpu_clk_setup()
clk: nomadik: Delete error messages for a failed memory allocation in two functions
clk: nomadik: Use seq_puts() in nomadik_src_clk_show()
clk: Improve a size determination in two functions
clk: Replace four seq_printf() calls by seq_putc()
clk: si5351: Delete an error message for a failed memory allocation in si5351_i2c_probe()
clk: si5351: Use devm_kcalloc() in si5351_i2c_probe()
clk: at91: Use kcalloc() in of_at91_clk_pll_get_characteristics()
reset: mediatek: Add MT2701 ethsys reset controller include file
clk: mediatek: add mt2701 ethernet reset
clk: hi6220: Add the hi655x's pmic clock
clk: ti: fix building without legacy omap3
clk: ti: fix linker error with !SOC_OMAP4
clk: hi3620: Fix a typo in one variable name
clk: hi3620: Delete error messages for a failed memory allocation in two functions
clk: hi3620: Use kcalloc() in hi3620_mmc_clk_init()
clk: hisilicon: Delete error messages for failed memory allocations in hisi_clk_init()
...
Add the missing reset bits of the ethsys core to the mt2701-reset include file, so that we can reference them from within a devicetree file. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Pull Allwinner clock patches for 4.12 from Maxime Ripard: Support for the new H5 SoC and the PRCM block found in a number of SoCs as well, plus the usual chunk of fixes and minor enhancements. * tag 'sunxi-clk-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: clk: sunxi-ng: Display index when clock registration fails clk: sunxi-ng: a33: Add offset and minimum value for DDR1 PLL N factor clk: sunxi-ng: a80: Remodel CPU cluster PLLs as N-type multiplier clocks clk: sunxi-ng: mult: Support PLL lock detection clk: sunxi-ng: add support for PRCM CCUs dt-bindings: update device tree binding for Allwinner PRCM CCUs clk: sunxi-ng: sun5i: Fix mux width for csi clock clk: sunxi-ng: tighten SoC deps on explicit AllWinner SoCs clk: sunxi-ng: add Allwinner H5 CCU support for H3 CCU driver clk: sunxi-ng: gate: Support common pre-dividers
SoCs after A31 has a clock controller module in the PRCM part. Support the clock controller module on H3/5 and A64 now. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Tegra210 has 2 special resets which don't follow the normal pattern: DVCO and ADSP. Add them in this patch. Changelog: v2: add DT bindings file Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
The Arria10 System Resource Chip reset controller handles the Arria10 peripheral PHYs. This patch adds the offsets for these PHYs. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add reset controller driver exposing various reset faculties, implemented by System Reset Controller IP block. Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Allwinner H5 is a SoC that features a design which keeps the peripheral compatible with H3, so that it have also a CCU like the one on H3 -- only one bus gate/reset is added, and the mmc sample/output phases are removed because of MMC controller update. Add its support in our existing H3 CCU driver. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
With the A80 SoC, Allwinner grouped and moved some subsystem specific clock controls to a separate address space, and possibly separate hardware block. One such subsystem is the display engine. The main clock control unit now only has 1 set of bus gate, dram gate, module clock, and reset control for the entire display subsystem. These feed into a secondary clock control unit, which has controls for each individual module of the display pipeline. This block is not documented in the user manual. Allwinner's kernel was used as the reference. Add support for the display engine clock controls found on the A80. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Add support for the USB clock controls found on the A80. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>