Add page-selective IOTLB flush using HVCALL_FLUSH_DEVICE_DOMAIN_LIST.
This hypercall accepts a list of (page_number, page_mask_shift) entries,
enabling finer-grained IOTLB invalidation compared to the domain-wide
HVCALL_FLUSH_DEVICE_DOMAIN used by hv_iommu_flush_iotlb_all().

hv_iommu_calc_flush_range() computes the smallest power-of-two aligned
range that covers the target IOVA region, producing a single flush
descriptor. This may over-flush when the range is not naturally aligned,
matching the approach used by Intel VT-d PSI. If the page-selective
flush fails, the code falls back to a full domain flush.

Signed-off-by: Easwar Hariharan <easwar.hariharan@linux.microsoft.com>
Signed-off-by: Yu Zhang <zhangyu1@linux.microsoft.com>
Reviewed-by: Jacob Pan <jacob.pan@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

Hyper-V guest IOMMU is a para-virtualized IOMMU based on hypercalls.
Introduce the hypercalls used by the child partition to interact with
this facility.

These hypercalls fall into below categories:
- Detection and capability: HVCALL_GET_IOMMU_CAPABILITIES is used to
  detect the existence and capabilities of the guest IOMMU.

- Device management: HVCALL_GET_LOGICAL_DEVICE_PROPERTY is used to
  check whether an endpoint device is managed by the guest IOMMU.

- Domain management: A set of hypercalls is provided to handle the
  creation, configuration, and deletion of guest domains, as well as
  the attachment/detachment of endpoint devices to/from those domains.

- IOTLB flushing: HVCALL_FLUSH_DEVICE_DOMAIN is used to ask Hyper-V
  for a domain-selective IOTLB flush (which in its handler may flush
  the device TLB as well).

Signed-off-by: Wei Liu <wei.liu@kernel.org>
Co-developed-by: Easwar Hariharan <easwar.hariharan@linux.microsoft.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@linux.microsoft.com>
Co-developed-by: Yu Zhang <zhangyu1@linux.microsoft.com>
Signed-off-by: Yu Zhang <zhangyu1@linux.microsoft.com>
Reviewed-by: Jacob Pan <jacob.pan@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

Keep it in sync with the correct definition.

The old code worked by chance.

Fixes: e68bda71a2384 ("hyperv: Add new Hyper-V headers in include/hyperv")
Cc: stable@kernel.org
Signed-off-by: Wei Liu <wei.liu@kernel.org>

Change the "64 bit" to "64-bit", and the "Os" to "OS".

Remove the obsolete paragraph since the guideline has been
published in the Hypervisor Top Level Functional Specification
for many years.

The "OS Type" is 0x1 for Linux, not 0x100.

No functional change.

Fixes: 83ba0c4f3f31 ("Drivers: hv: Cleanup the guest ID computation")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>

That was missed when importing the header.

Reported-by: Doru Blânzeanu <dblanzeanu@linux.microsoft.com>
Reported-by: Magnus Kulke <magnuskulke@linux.microsoft.com>
Fixes: e68bda71a2384 ("hyperv: Add new Hyper-V headers in include/hyperv")
Cc: stable@kernel.org
Reviewed-by: Easwar Hariharan <easwar.hariharan@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>

After a kexec the logical processors and virtual processors already
exist in the hypervisor because they were created by the previous
kernel. Attempting to add them again causes either a BUG_ON or
corrupted VP state leading to MCEs in the new kernel.

Add hv_lp_exists() to probe whether an LP is already present by
calling HVCALL_GET_LOGICAL_PROCESSOR_RUN_TIME. When it succeeds the
LP exists and we skip the add-LP and create-VP loops entirely.

Also add hv_call_notify_all_processors_started() which informs the
hypervisor that all processors are online. This is required after
adding LPs (fresh boot) and is a no-op on kexec since we skip that
path.

Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Co-developed-by: Stanislav Kinsburskii <stanislav.kinsburskii@gmail.com>
Signed-off-by: Stanislav Kinsburskii <stanislav.kinsburskii@gmail.com>
Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Signed-off-by: Jork Loeser <jloeser@linux.microsoft.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>

Prevent infinite fault loops when guests access memory regions without
proper permissions. Currently, mshv_handle_gpa_intercept() attempts to
remap pages for all faults on movable memory regions, regardless of
whether the access type is permitted. When a guest writes to a read-only
region, the remap succeeds but the region remains read-only, causing
immediate re-fault and spinning the vCPU indefinitely.

Validate intercept access type against region permissions before
attempting remaps. Reject writes to non-writable regions and executes to
non-executable regions early, returning false to let the VMM handle the
intercept appropriately.

This also closes a potential DoS vector where malicious guests could
intentionally trigger these fault loops to consume host resources.

Fixes: b9a66cd5ccbb ("mshv: Add support for movable memory regions")
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>

This reverts commit 36d6cbb62133fc6eea28f380409e0fb190f3dfbe.

Calling this as a passthrough hypercall leaves the VM in an inconsistent
state. Revert before it is released.

Signed-off-by: Wei Liu <wei.liu@kernel.org>

On x86, the HYPERVISOR_CALLBACK_VECTOR is used to receive synthetic
interrupts (SINTs) from the hypervisor for doorbells and intercepts.
There is no such vector reserved for arm64.

On arm64, the hypervisor exposes a synthetic register that can be read
to find the INTID that should be used for SINTs. This INTID is in the
PPI range.

To better unify the code paths, introduce mshv_sint_vector_init() that
either reads the synthetic register and obtains the INTID (arm64) or
just uses HYPERVISOR_CALLBACK_VECTOR as the interrupt vector (x86).

Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Signed-off-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>

Pull Hyper-V updates from Wei Liu:

 - Debugfs support for MSHV statistics (Nuno Das Neves)

 - Support for the integrated scheduler (Stanislav Kinsburskii)

 - Various fixes for MSHV memory management and hypervisor status
   handling (Stanislav Kinsburskii)

 - Expose more capabilities and flags for MSHV partition management
   (Anatol Belski, Muminul Islam, Magnus Kulke)

 - Miscellaneous fixes to improve code quality and stability (Carlos
   López, Ethan Nelson-Moore, Li RongQing, Michael Kelley, Mukesh
   Rathor, Purna Pavan Chandra Aekkaladevi, Stanislav Kinsburskii, Uros
   Bizjak)

 - PREEMPT_RT fixes for vmbus interrupts (Jan Kiszka)

* tag 'hyperv-next-signed-20260218' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (34 commits)
  mshv: Handle insufficient root memory hypervisor statuses
  mshv: Handle insufficient contiguous memory hypervisor status
  mshv: Introduce hv_deposit_memory helper functions
  mshv: Introduce hv_result_needs_memory() helper function
  mshv: Add SMT_ENABLED_GUEST partition creation flag
  mshv: Add nested virtualization creation flag
  Drivers: hv: vmbus: Simplify allocation of vmbus_evt
  mshv: expose the scrub partition hypercall
  mshv: Add support for integrated scheduler
  mshv: Use try_cmpxchg() instead of cmpxchg()
  x86/hyperv: Fix error pointer dereference
  x86/hyperv: Reserve 3 interrupt vectors used exclusively by MSHV
  Drivers: hv: vmbus: Use kthread for vmbus interrupts on PREEMPT_RT
  x86/hyperv: Remove ASM_CALL_CONSTRAINT with VMMCALL insn
  x86/hyperv: Use savesegment() instead of inline asm() to save segment registers
  mshv: fix SRCU protection in irqfd resampler ack handler
  mshv: make field names descriptive in a header struct
  x86/hyperv: Update comment in hyperv_cleanup()
  mshv: clear eventfd counter on irqfd shutdown
  x86/hyperv: Use memremap()/memunmap() instead of ioremap_cache()/iounmap()
  ...