KUnit's assertion macros have variants which accept a printf format string, to allow tests to specify a more detailed message on failure. These (and the related KUNIT_FAIL() macro) ultimately wrap the __kunit_do_failed_assertion() function, which accepted a printf format specifier, but did not have the __printf attribute, so gcc couldn't warn on incorrect agruments. It turns out there were quite a few tests with such incorrect arguments. Add the __printf() specifier now that we've fixed these errors, to prevent them from recurring. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David Gow <davidgow@google.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Justin Stitt <justinstitt@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Pull networking updates from Paolo Abeni:
"The most interesting thing is probably the networking structs
reorganization and a significant amount of changes is around
self-tests.
Core & protocols:
- Analyze and reorganize core networking structs (socks, netdev,
netns, mibs) to optimize cacheline consumption and set up build
time warnings to safeguard against future header changes
This improves TCP performances with many concurrent connections up
to 40%
- Add page-pool netlink-based introspection, exposing the memory
usage and recycling stats. This helps indentify bad PP users and
possible leaks
- Refine TCP/DCCP source port selection to no longer favor even
source port at connect() time when IP_LOCAL_PORT_RANGE is set. This
lowers the time taken by connect() for hosts having many active
connections to the same destination
- Refactor the TCP bind conflict code, shrinking related socket
structs
- Refactor TCP SYN-Cookie handling, as a preparation step to allow
arbitrary SYN-Cookie processing via eBPF
- Tune optmem_max for 0-copy usage, increasing the default value to
128KB and namespecifying it
- Allow coalescing for cloned skbs coming from page pools, improving
RX performances with some common configurations
- Reduce extension header parsing overhead at GRO time
- Add bridge MDB bulk deletion support, allowing user-space to
request the deletion of matching entries
- Reorder nftables struct members, to keep data accessed by the
datapath first
- Introduce TC block ports tracking and use. This allows supporting
multicast-like behavior at the TC layer
- Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and
classifiers (RSVP and tcindex)
- More data-race annotations
- Extend the diag interface to dump TCP bound-only sockets
- Conditional notification of events for TC qdisc class and actions
- Support for WPAN dynamic associations with nearby devices, to form
a sub-network using a specific PAN ID
- Implement SMCv2.1 virtual ISM device support
- Add support for Batman-avd mulicast packet type
BPF:
- Tons of verifier improvements:
- BPF register bounds logic and range support along with a large
test suite
- log improvements
- complete precision tracking support for register spills
- track aligned STACK_ZERO cases as imprecise spilled registers.
This improves the verifier "instructions processed" metric from
single digit to 50-60% for some programs
- support for user's global BPF subprogram arguments with few
commonly requested annotations for a better developer
experience
- support tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the
like
- several fixes
- Add initial TX metadata implementation for AF_XDP with support in
mlx5 and stmmac drivers. Two types of offloads are supported right
now, that is, TX timestamp and TX checksum offload
- Fix kCFI bugs in BPF all forms of indirect calls from BPF into
kernel and from kernel into BPF work with CFI enabled. This allows
BPF to work with CONFIG_FINEIBT=y
- Change BPF verifier logic to validate global subprograms lazily
instead of unconditionally before the main program, so they can be
guarded using BPF CO-RE techniques
- Support uid/gid options when mounting bpffs
- Add a new kfunc which acquires the associated cgroup of a task
within a specific cgroup v1 hierarchy where the latter is
identified by its id
- Extend verifier to allow bpf_refcount_acquire() of a map value
field obtained via direct load which is a use-case needed in
sched_ext
- Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter
- Support for VLAN tag in XDP hints
- Remove deprecated bpfilter kernel leftovers given the project is
developed in user-space (https://github.com/facebook/bpfilter)
Misc:
- Support for parellel TC self-tests execution
- Increase MPTCP self-tests coverage
- Updated the bridge documentation, including several so-far
undocumented features
- Convert all the net self-tests to run in unique netns, to avoid
random failures due to conflict and allow concurrent runs
- Add TCP-AO self-tests
- Add kunit tests for both cfg80211 and mac80211
- Autogenerate Netlink families documentation from YAML spec
- Add yml-gen support for fixed headers and recursive nests, the tool
can now generate user-space code for all genetlink families for
which we have specs
- A bunch of additional module descriptions fixes
- Catch incorrect freeing of pages belonging to a page pool
Driver API:
- Rust abstractions for network PHY drivers; do not cover yet the
full C API, but already allow implementing functional PHY drivers
in rust
- Introduce queue and NAPI support in the netdev Netlink interface,
allowing complete access to the device <> NAPIs <> queues
relationship
- Introduce notifications filtering for devlink to allow control
application scale to thousands of instances
- Improve PHY validation, requesting rate matching information for
each ethtool link mode supported by both the PHY and host
- Add support for ethtool symmetric-xor RSS hash
- ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD
platform
- Expose pin fractional frequency offset value over new DPLL generic
netlink attribute
- Convert older drivers to platform remove callback returning void
- Add support for PHY package MMD read/write
New hardware / drivers:
- Ethernet:
- Octeon CN10K devices
- Broadcom 5760X P7
- Qualcomm SM8550 SoC
- Texas Instrument DP83TG720S PHY
- Bluetooth:
- IMC Networks Bluetooth radio
Removed:
- WiFi:
- libertas 16-bit PCMCIA support
- Atmel at76c50x drivers
- HostAP ISA/PCMCIA style 802.11b driver
- zd1201 802.11b USB dongles
- Orinoco ISA/PCMCIA 802.11b driver
- Aviator/Raytheon driver
- Planet WL3501 driver
- RNDIS USB 802.11b driver
Driver updates:
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- allow one by one port representors creation and removal
- add temperature and clock information reporting
- add get/set for ethtool's header split ringparam
- add again FW logging
- adds support switchdev hardware packet mirroring
- iavf: implement symmetric-xor RSS hash
- igc: add support for concurrent physical and free-running
timers
- i40e: increase the allowable descriptors
- nVidia/Mellanox:
- Preparation for Socket-Direct multi-dev netdev. That will
allow in future releases combining multiple PFs devices
attached to different NUMA nodes under the same netdev
- Broadcom (bnxt):
- TX completion handling improvements
- add basic ntuple filter support
- reduce MSIX vectors usage for MQPRIO offload
- add VXLAN support, USO offload and TX coalesce completion
for P7
- Marvell Octeon EP:
- xmit-more support
- add PF-VF mailbox support and use it for FW notifications
for VFs
- Wangxun (ngbe/txgbe):
- implement ethtool functions to operate pause param, ring
param, coalesce channel number and msglevel
- Netronome/Corigine (nfp):
- add flow-steering support
- support UDP segmentation offload
- Ethernet NICs embedded, slower, virtual:
- Xilinx AXI: remove duplicate DMA code adopting the dma engine
driver
- stmmac: add support for HW-accelerated VLAN stripping
- TI AM654x sw: add mqprio, frame preemption & coalescing
- gve: add support for non-4k page sizes.
- virtio-net: support dynamic coalescing moderation
- nVidia/Mellanox Ethernet datacenter switches:
- allow firmware upgrade without a reboot
- more flexible support for bridge flooding via the compressed
FID flooding mode
- Ethernet embedded switches:
- Microchip:
- fine-tune flow control and speed configurations in KSZ8xxx
- KSZ88X3: enable setting rmii reference
- Renesas:
- add jumbo frames support
- Marvell:
- 88E6xxx: add "eth-mac" and "rmon" stats support
- Ethernet PHYs:
- aquantia: add firmware load support
- at803x: refactor the driver to simplify adding support for more
chip variants
- NXP C45 TJA11xx: Add MACsec offload support
- Wifi:
- MediaTek (mt76):
- NVMEM EEPROM improvements
- mt7996 Extremely High Throughput (EHT) improvements
- mt7996 Wireless Ethernet Dispatcher (WED) support
- mt7996 36-bit DMA support
- Qualcomm (ath12k):
- support for a single MSI vector
- WCN7850: support AP mode
- Intel (iwlwifi):
- new debugfs file fw_dbg_clear
- allow concurrent P2P operation on DFS channels
- Bluetooth:
- QCA2066: support HFP offload
- ISO: more broadcast-related improvements
- NXP: better recovery in case receiver/transmitter get out of sync"
* tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1714 commits)
lan78xx: remove redundant statement in lan78xx_get_eee
lan743x: remove redundant statement in lan743x_ethtool_get_eee
bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer()
bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel()
bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter()
tcp: Revert no longer abort SYN_SENT when receiving some ICMP
Revert "mlx5 updates 2023-12-20"
Revert "net: stmmac: Enable Per DMA Channel interrupt"
ipvlan: Remove usage of the deprecated ida_simple_xx() API
ipvlan: Fix a typo in a comment
net/sched: Remove ipt action tests
net: stmmac: Use interrupt mode INTM=1 for per channel irq
net: stmmac: Add support for TX/RX channel interrupt
net: stmmac: Make MSI interrupt routine generic
dt-bindings: net: snps,dwmac: per channel irq
net: phy: at803x: make read_status more generic
net: phy: at803x: add support for cdt cross short test for qca808x
net: phy: at803x: refactor qca808x cable test get status function
net: phy: at803x: generalize cdt fault length function
net: ethernet: cortina: Drop TSO support
...
Add NULL checks to KUNIT_BINARY_STR_ASSERTION() so that it will fail cleanly if either pointer is NULL, instead of causing a NULL pointer dereference in the strcmp(). A test failure could be that a string is unexpectedly NULL. This could be trapped by KUNIT_ASSERT_NOT_NULL() but that would terminate the test at that point. It's preferable that the KUNIT_EXPECT_STR*() macros can handle NULL pointers as a failure. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Swap the arguments to typecheck_fn() in kunit_activate_static_stub()
so that real_fn_addr can be either the function itself or a pointer
to that function.
This is useful to simplify redirecting static functions in a module.
Having to pass the actual function meant that it must be exported
from the module. Either making the 'static' and EXPORT_SYMBOL*()
conditional (which makes the code messy), or change it to always
exported (which increases the export namespace and prevents the
compiler inlining a trivial stub function in non-test builds).
With the original definition of kunit_activate_static_stub() the
address of real_fn_addr was passed to typecheck_fn() as the type to
be passed. This meant that if real_fn_addr was a pointer-to-function
it would resolve to a ** instead of a *, giving an error like this:
error: initialization of ‘int (**)(int)’ from incompatible pointer
type ‘int (*)(int)’ [-Werror=incompatible-pointer-types]
kunit_activate_static_stub(test, add_one_fn_ptr, subtract_one);
| ^~~~~~~~~~~~
./include/linux/typecheck.h:21:25: note: in definition of macro
‘typecheck_fn’
21 | ({ typeof(type) __tmp = function; \
Swapping the arguments to typecheck_fn makes it take the type of a
pointer to the replacement function. Either a function or a pointer
to function can be assigned to that. For example:
static int some_function(int x)
{
/* whatever */
}
int (* some_function_ptr)(int) = some_function;
static int replacement(int x)
{
/* whatever */
}
Then:
kunit_activate_static_stub(test, some_function, replacement);
yields:
typecheck_fn(typeof(&replacement), some_function);
and:
kunit_activate_static_stub(test, some_function_ptr, replacement);
yields:
typecheck_fn(typeof(&replacement), some_function_ptr);
The two typecheck_fn() then resolve to:
int (*__tmp)(int) = some_function;
and
int (*__tmp)(int) = some_function_ptr;
Both of these are valid. In the first case the compiler inserts
an implicit '&' to take the address of the supplied function, and
in the second case the RHS is already a pointer to the same type.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a simple convenience helper to allocate and zero fill an SKB for the use by a kunit test. Also provide a way to free it again in case that may be desirable. This simply mirrors the kunit_kmalloc API. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: David Gow <davidgow@google.com> Link: https://msgid.link/20231220151952.415232-3-benjamin@sipsolutions.net [adjust file description as discussed] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The existing KUNIT_ARRAY_PARAM macro requires a separate function to get the description. However, in a lot of cases the description can just be copied directly from the array. Add a second macro that avoids having to write a static function just for a single strscpy. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: David Gow <davidgow@google.com> Link: https://msgid.link/20231220151952.415232-2-benjamin@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Tests for drivers often require a struct device to pass to other functions. While it's possible to create these with root_device_register(), or to use something like a platform device, this is both a misuse of those APIs, and can be difficult to clean up after, for example, a failed assertion. Add some KUnit-specific functions for registering and unregistering a struct device: - kunit_device_register() - kunit_device_register_with_driver() - kunit_device_unregister() These helpers allocate a on a 'kunit' bus which will either probe the driver passed in (kunit_device_register_with_driver), or will create a stub driver (kunit_device_register) which is cleaned up on test shutdown. Devices are automatically unregistered on test shutdown, but can be manually unregistered earlier with kunit_device_unregister() in order to, for example, test device release code. Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: David Gow <davidgow@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add is_init test attribute of type bool. Add to_string, get, and filter methods to lib/kunit/attributes.c. Mark each of the tests in the init section with the is_init=true attribute. Add is_init to the attributes documentation. Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Rae Moar <rmoar@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add KUNIT_INIT_TABLE to the INIT_DATA linker section. Alter the KUnit macros to create init tests: kunit_test_init_section_suites Update lib/kunit/executor.c to run both the suites in KUNIT_TABLE and KUNIT_INIT_TABLE. Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Rae Moar <rmoar@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
KUnit's deferred action API accepts a void(*)(void *) function pointer which is called when the test is exited. However, we very frequently want to use existing functions which accept a single pointer, but which may not be of type void*. While this is probably dodgy enough to be on the wrong side of the C standard, it's been often used for similar callbacks, and gcc's -Wcast-function-type seems to ignore cases where the only difference is the type of the argument, assuming it's compatible (i.e., they're both pointers to data). However, clang 16 has introduced -Wcast-function-type-strict, which no longer permits any deviation in function pointer type. This seems to be because it'd break CFI, which validates the type of function calls. This rather ruins our attempts to cast functions to defer them, and leaves us with a few options. The one we've chosen is to implement a macro which will generate a wrapper function which accepts a void*, and casts the argument to the appropriate type. For example, if you were trying to wrap: void foo_close(struct foo *handle); you could use: KUNIT_DEFINE_ACTION_WRAPPER(kunit_action_foo_close, foo_close, struct foo *); This would create a new kunit_action_foo_close() function, of type kunit_action_t, which could be passed into kunit_add_action() and similar functions. In addition to defining this macro, update KUnit and its tests to use it. Link: https://github.com/ClangBuiltLinux/linux/issues/1750 Reviewed-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>