Pull hyperv updates from Wei Liu: - Support for Virtual Trust Level (VTL) on arm64 (Roman Kisel) - Fixes for Hyper-V UIO driver (Long Li) - Fixes for Hyper-V PCI driver (Michael Kelley) - Select CONFIG_SYSFB for Hyper-V guests (Michael Kelley) - Documentation updates for Hyper-V VMBus (Michael Kelley) - Enhance logging for hv_kvp_daemon (Shradha Gupta) * tag 'hyperv-next-signed-20250602' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (23 commits) Drivers: hv: Always select CONFIG_SYSFB for Hyper-V guests Drivers: hv: vmbus: Add comments about races with "channels" sysfs dir Documentation: hyperv: Update VMBus doc with new features and info PCI: hv: Remove unnecessary flex array in struct pci_packet Drivers: hv: Remove hv_alloc/free_* helpers Drivers: hv: Use kzalloc for panic page allocation uio_hv_generic: Align ring size to system page uio_hv_generic: Use correct size for interrupt and monitor pages Drivers: hv: Allocate interrupt and monitor pages aligned to system page boundary arch/x86: Provide the CPU number in the wakeup AP callback x86/hyperv: Fix APIC ID and VP index confusion in hv_snp_boot_ap() PCI: hv: Get vPCI MSI IRQ domain from DeviceTree ACPI: irq: Introduce acpi_get_gsi_dispatcher() Drivers: hv: vmbus: Introduce hv_get_vmbus_root_device() Drivers: hv: vmbus: Get the IRQ number from DeviceTree dt-bindings: microsoft,vmbus: Add interrupt and DMA coherence properties arm64, x86: hyperv: Report the VTL the system boots in arm64: hyperv: Initialize the Virtual Trust Level field Drivers: hv: Provide arch-neutral implementation of get_vtl() Drivers: hv: Enable VTL mode for arm64 ...
Merge an ACPI resources management update, ACPI power management updates, an ACPI platform profile driver fix and an ACPI documentation update related to device properties for 6.16-rc1: - Fix a typo for MECHREVO in irq1_edge_low_force_override[] (Mingcong Bai). - Add an LPS0 check() callback to the AMD pinctrl driver and fix up config symbol dependencies in it (Mario Limonciello, Rafael Wysocki). - Avoid initializing the ACPI platform profile driver on non-ACPI platforms (Alexandre Ghiti). - Document that references to ACPI data (non-device) nodes should use string-only references in hierarchical data node packages (Sakari Ailus). * acpi-resource: ACPI: resource: fix a typo for MECHREVO in irq1_edge_low_force_override[] * acpi-pm: pinctrl: amd: Fix hibernation support with CONFIG_SUSPEND unset pinctrl: amd: Fix use of undeclared identifier 'pinctrl_amd_s2idle_dev_ops' pinctrl: amd: Add an LPS0 check() callback ACPI: Add missing prototype for non CONFIG_SUSPEND/CONFIG_X86 case * acpi-platform-profile: ACPI: platform_profile: Avoid initializing on non-ACPI platforms * acpi-docs: Documentation: ACPI: Use all-string data node references
Per the spec, the default max memory region must be 1 covering all system memory. When platform does not provide ACPI MRRM table or when CONFIG_ACPI is opted out, the acpi_mrrm_max_mem_region() function defaults to returning 1 region complying to RDT spec. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Link: https://patch.msgid.link/20250523172001.1761634-1-anil.s.keshavamurthy@intel.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Using acpi_irq_create_hierarchy() in the cases where the code also handles OF leads to code duplication as the ACPI subsystem doesn't provide means to compute the IRQ domain parent whereas the OF does. Introduce acpi_get_gsi_dispatcher() so that the drivers relying on both ACPI and OF may use irq_domain_create_hierarchy() in the common code paths. No functional changes. Signed-off-by: Roman Kisel <romank@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20250428210742.435282-11-romank@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20250428210742.435282-11-romank@linux.microsoft.com>
The resctrl file system code needs to know how many region tags are supported. Parse the ACPI MRRM table and save the max_mem_region value. Provide a function for resctrl to collect that value. Signed-off-by: Tony Luck <tony.luck@intel.com> Link: https://patch.msgid.link/20250505173819.419271-2-tony.luck@intel.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_register_lps0_dev() and acpi_unregister_lps0_dev() may be used in drivers that don't require CONFIG_SUSPEND or compile on !X86. Add prototypes for those cases. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202502191627.fRgoBwcZ-lkp@intel.com/ Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://patch.msgid.link/20250407183656.1503446-1-superm1@kernel.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull Compute Express Link (CXL) updates from Dave Jiang:
- Add support for Global Persistent Flush (GPF)
- Cleanup of DPA partition metadata handling:
- Remove the CXL_DECODER_MIXED enum that's not needed anymore
- Introduce helpers to access resource and perf meta data
- Introduce 'struct cxl_dpa_partition' and 'struct cxl_range_info'
- Make cxl_dpa_alloc() DPA partition number agnostic
- Remove cxl_decoder_mode
- Cleanup partition size and perf helpers
- Remove unused CXL partition values
- Add logging support for CXL CPER endpoint and port protocol errors:
- Prefix protocol error struct and function names with cxl_
- Move protocol error definitions and structures to a common location
- Remove drivers/firmware/efi/cper_cxl.h to include/linux/cper.h
- Add support in GHES to process CXL CPER protocol errors
- Process CXL CPER protocol errors
- Add trace logging for CXL PCIe port RAS errors
- Remove redundant gp_port init
- Add validation of cxl device serial number
- CXL ABI documentation updates/fixups
- A series that uses guard() to clean up open coded mutex lockings and
remove gotos for error handling.
- Some followup patches to support dirty shutdown accounting:
- Add helper to retrieve DVSEC offset for dirty shutdown registers
- Rename cxl_get_dirty_shutdown() to cxl_arm_dirty_shutdown()
- Add support for dirty shutdown count via sysfs
- cxl_test support for dirty shutdown
- A series to support CXL mailbox Features commands.
Mostly in preparation for CXL EDAC code to utilize the Features
commands. It's also in preparation for CXL fwctl support to utilize
the CXL Features. The commands include "Get Supported Features", "Get
Feature", and "Set Feature".
- A series to support extended linear cache support described by the
ACPI HMAT table.
The addition helps enumerate the cache and also provides additional
RAS reporting support for configuration with extended linear cache.
(and related fixes for the series).
- An update to cxl_test to support a 3-way capable CFMWS
- A documentation fix to remove unused "mixed mode"
* tag 'cxl-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (39 commits)
cxl/region: Fix the first aliased address miscalculation
cxl/region: Quiet some dev_warn()s in extended linear cache setup
cxl/Documentation: Remove 'mixed' from sysfs mode doc
cxl: Fix warning from emitting resource_size_t as long long int on 32bit systems
cxl/test: Define a CFMWS capable of a 3 way HB interleave
cxl/mem: Do not return error if CONFIG_CXL_MCE unset
tools/testing/cxl: Set Shutdown State support
cxl/pmem: Export dirty shutdown count via sysfs
cxl/pmem: Rename cxl_dirty_shutdown_state()
cxl/pci: Introduce cxl_gpf_get_dvsec()
cxl/pci: Support Global Persistent Flush (GPF)
cxl: Document missing sysfs files
cxl: Plug typos in ABI doc
cxl/pmem: debug invalid serial number data
cxl/cdat: Remove redundant gp_port initialization
cxl/memdev: Remove unused partition values
cxl/region: Drop goto pattern of construct_region()
cxl/region: Drop goto pattern in cxl_dax_region_alloc()
cxl/core: Use guard() to drop goto pattern of cxl_dpa_alloc()
cxl/core: Use guard() to drop the goto pattern of cxl_dpa_free()
...
The current cxl region size only indicates the size of the CXL memory region without accounting for the extended linear cache size. Retrieve the cache size from HMAT and append that to the cxl region size for the cxl region range that matches the SRAT range that has extended linear cache enabled. The SRAT defines the whole memory range that includes the extended linear cache and the CXL memory region. The new HMAT ECN/ECR to the Memory Side Cache Information Structure defines the size of the extended linear cache size and matches to the SRAT Memory Affinity Structure by the memory proxmity domain. Add a helper to match the cxl range to the SRAT memory range in order to retrieve the cache size. There are several places that checks the cxl region range against the decoder range. Use new helper to check between the two ranges and address the new cache size. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Li Ming <ming.li@zohomail.com> Reviewed-by: Alison Schofield <alison.schofield@intel.com> Link: https://patch.msgid.link/20250226162224.3633792-3-dave.jiang@intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Move the following sysctl tables into arch/x86/kernel/setup.c:
panic_on_{unrecoverable_nmi,io_nmi}
bootloader_{type,version}
io_delay_type
unknown_nmi_panic
acpi_realmode_flags
Variables moved from include/linux/ to arch/x86/include/asm/ because there
is no longer need for them outside arch/x86/kernel:
acpi_realmode_flags
panic_on_{unrecoverable_nmi,io_nmi}
Include <asm/nmi.h> in arch/s86/kernel/setup.h in order to bring in
panic_on_{io_nmi,unrecovered_nmi}.
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kerenel/sysctl.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250218-jag-mv_ctltables-v1-8-cd3698ab8d29@kernel.org
Provide an implementation of acpi_device_handle that can be used when CONFIG_ACPI is not set. Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Link: https://patch.msgid.link/20241216-fix-ipu-v5-4-3d6b35ddce7b@chromium.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>