linux-toradex.git/include/linux/amba/bus.h, branch v3.4.73 Linux kernel for Apalis and Colibri modules ARM: 7366/3: amba: Remove AMBA level regulator support 2012-04-13T13:04:08+00:00 Mark Brown broonie@sirena.org.uk 2012-04-13T12:11:50+00:00 1e45860f541497d73162305d48b638d9b87e1ae3 The AMBA bus regulator support is being used to model on/off switches for power domains which isn't terribly idiomatic for modern kernels with the generic power domain code and creates integration problems on platforms which don't use regulators for their power domains as it's hard to tell the difference between a regulator that is needed but failed to be provided and one that isn't supposed to be there (though DT does make that easier). Platforms that wish to use the regulator API to manage their power domains can indirect via the power domain interface. This feature is only used with the vape supply of the db8500 PRCMU driver which supplies the UARTs and MMC controllers, none of which have support for managing vcore at runtime in mainline (only pl022 SPI controller does). Update that supply to have an always_on constraint until the power domain support for the system is updated so that it is enabled for these users, this is likely to have no impact on practical systems as probably at least one of these devices will be active and cause AMBA to hold the supply on anyway. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
The AMBA bus regulator support is being used to model on/off switches
for power domains which isn't terribly idiomatic for modern kernels with
the generic power domain code and creates integration problems on platforms
which don't use regulators for their power domains as it's hard to tell
the difference between a regulator that is needed but failed to be provided
and one that isn't supposed to be there (though DT does make that easier).

Platforms that wish to use the regulator API to manage their power domains
can indirect via the power domain interface.

This feature is only used with the vape supply of the db8500 PRCMU
driver which supplies the UARTs and MMC controllers, none of which have
support for managing vcore at runtime in mainline (only pl022 SPI
controller does).  Update that supply to have an always_on constraint
until the power domain support for the system is updated so that it is
enabled for these users, this is likely to have no impact on practical
systems as probably at least one of these devices will be active and
cause AMBA to hold the supply on anyway.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
ARM: 7362/1: AMBA: Add module_amba_driver() helper macro for amba_driver 2012-03-16T23:32:35+00:00 viresh kumar viresh.kumar@st.com 2012-03-15T09:40:38+00:00 9e5ed094c89e55fbf11d2e81d60be98eb12346c0 For simple modules that contain a single amba_driver without any additional setup code then ends up being a block of duplicated boilerplate. This patch adds a new macro, module_amba_driver(), which replaces the module_init()/module_exit() registrations with template functions. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
For simple modules that contain a single amba_driver without any
additional setup code then ends up being a block of duplicated
boilerplate. This patch adds a new macro, module_amba_driver(),
which replaces the module_init()/module_exit() registrations with
template functions.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
ARM: amba: provide common initializers for static amba devices 2012-01-25T11:04:03+00:00 Russell King rmk+kernel@arm.linux.org.uk 2011-12-18T12:06:25+00:00 cc6e75af8df7aa40019ff58357170c8dd960281f Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
ARM: amba: add amba_device allocation/add/put functions 2012-01-25T11:02:01+00:00 Russell King rmk+kernel@arm.linux.org.uk 2011-12-18T11:07:47+00:00 d5dc9271b25822f36d299f8cab985379743424b9 Add functions to allocate and initialize AMBA device structures, and add them to the Linux device manager. This allows us to kill this type of operation from individual platforms, moving it to core code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
Add functions to allocate and initialize AMBA device structures, and
add them to the Linux device manager.  This allows us to kill this
type of operation from individual platforms, moving it to core code.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
ARM: amba: Move definition of struct amba_id to mod_devicetable.h 2011-11-22T10:58:30+00:00 Dave Martin dave.martin@linaro.org 2011-10-05T13:40:59+00:00 1e5f9a23430e64fb56d9d5d8e1ca165ba1cfeb75 The general kernel infrastructure for adding module alises during module post processing expects the affected device type identification structures in a common header <linux/mod_devicetable.h>. This patch simple moves struct amba_id to the common header, and adds the appropriate include in <linux/amba/bus.h>. Signed-off-by: Dave Martin <dave.martin@linaro.org> 
The general kernel infrastructure for adding module alises during
module post processing expects the affected device type
identification structures in a common header
<linux/mod_devicetable.h>.

This patch simple moves struct amba_id to the common header, and
adds the appropriate include in <linux/amba/bus.h>.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
ARM: 6758/1: amba: support pm ops 2011-02-23T16:26:46+00:00 Rabin Vincent rabin.vincent@stericsson.com 2011-02-23T03:33:17+00:00 ba74ec7f6b2bf9e1b5d0f2c5cef08766944cb2c8 Support pm_ops in the AMBA bus, required to allow drivers to use runtime pm. The implementation of AMBA bus pm ops is based on the platform bus implementation. Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
Support pm_ops in the AMBA bus, required to allow drivers to use runtime pm.
The implementation of AMBA bus pm ops is based on the platform bus
implementation.

Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
ARM: amba: make amba_driver id_table const 2011-02-23T16:24:22+00:00 Russell King rmk+kernel@arm.linux.org.uk 2011-02-19T15:55:48+00:00 2d00880fa842e7dd34f5bb5eb3b5f8337b068be5 Now that the bus level code deals with a const id table, we can also make the ID table in the amba_driver structure also const. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
Now that the bus level code deals with a const id table, we can also
make the ID table in the amba_driver structure also const.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
ARM: amba: make probe() functions take const id tables 2011-02-23T16:24:14+00:00 Russell King rmk+kernel@arm.linux.org.uk 2011-02-19T15:55:00+00:00 aa25afad2ca60d19457849ea75e9c31236f4e174 Make Primecell driver probe functions take a const pointer to their ID tables. Drivers should never modify their ID tables in their probe handler. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
Make Primecell driver probe functions take a const pointer to their
ID tables.  Drivers should never modify their ID tables in their
probe handler.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
ARM: 6662/1: amba: make amba_bustype non-static 2011-02-23T16:24:08+00:00 Rob Herring rob.herring@calxeda.com 2011-02-12T14:58:25+00:00 394d5aefcdecb51bbf7d6df757e73559c9692a08 Export amba_bustype struct so it can be used for things like registering bus notifiers. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
Export amba_bustype struct so it can be used for things like registering
bus notifiers.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
ARM: 6467/1: amba: optional PrimeCell core voltage switch 2010-11-26T10:59:12+00:00 Linus Walleij linus.walleij@stericsson.com 2010-11-04T12:06:59+00:00 65500fa94aaeb3475e39c0c5180f188014164ca4 On some contemporary sub-micron SoCs, peripherals on the chip have power domain switches, i.e. the voltage to the core may be turned off to conserve power. In the Ux500 we have this for out PrimeCell derivates. This patch makes it possible to specify an (optional) regulator to handle the voltage domain switch on AMBA PrimeCells, modeled very similar to how block clocks are handled. Additional amba_vcore_[enable|disable] calls are supplied to make it possible introduce optional powering off of the core voltage. Using this will require code to spool/unspool any core HW state. Cc: Rabin Vincent <rabin.vincent@stericsson.com> Cc: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Cc: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
On some contemporary sub-micron SoCs, peripherals on the chip have
power domain switches, i.e. the voltage to the core may be turned
off to conserve power. In the Ux500 we have this for out PrimeCell
derivates.

This patch makes it possible to specify an (optional) regulator to
handle the voltage domain switch on AMBA PrimeCells, modeled very
similar to how block clocks are handled.

Additional amba_vcore_[enable|disable] calls are supplied to make
it possible introduce optional powering off of the core voltage.
Using this will require code to spool/unspool any core HW state.

Cc: Rabin Vincent <rabin.vincent@stericsson.com>
Cc: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
Cc: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>