Also partially revert the follow-up change "drm: pl111: Absorb the external register header". This reverts the parts of commits 7e4e589db76a3cf4c1f534eb5a09cc6422766b93 and 0fb8125635e8eb5483fb095f98dcf0651206a7b8 that touch paths outside of drivers/gpu/drm/pl111. The fbdev driver is used by Android's FVP configuration. Using the DRM driver together with DRM's fbdev emulation results in a failure to boot Android. The root cause is that Android's generic fbdev userspace driver relies on the ability to set the pixel format via FBIOPUT_VSCREENINFO, which is not supported by fbdev emulation. There have been other less critical behavioral differences identified between the fbdev driver and the DRM driver with fbdev emulation. The DRM driver exposes different values for the panel's width, height and refresh rate, and the DRM driver fails a FBIOPUT_VSCREENINFO syscall with yres_virtual greater than the maximum supported value instead of letting the syscall succeed and setting yres_virtual based on yres. Signed-off-by: Peter Collingbourne <pcc@google.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200929195344.2219796-1-pcc@google.com
The PL111 DRM driver is now the sole user of the external CLCD registers header file, so let's absorb that into the pl111_drm.h file and save the external include. Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Russell King <linux@armlinux.org.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200609200446.153209-3-linus.walleij@linaro.org
All the functionality in this driver has been reimplemented in the new DRM driver in drivers/gpu/drm/pl111/* and all the boards using it have been migrated to use the DRM driver with all configuration coming from the device tree. I started the work to migrate the CLCD driver to DRM in april 2017 and it took a little more than 3 years to do this properly without leaving any platforms behind. Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Russell King <linux@armlinux.org.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200609200446.153209-2-linus.walleij@linaro.org
It's currently the amba driver's responsibility to initialize the pointer, dma_parms, for its corresponding struct device. The benefit with this approach allows us to avoid the initialization and to not waste memory for the struct device_dma_parameters, as this can be decided on a case by case basis. However, it has turned out that this approach is not very practical. Not only does it lead to open coding, but also to real errors. In principle callers of dma_set_max_seg_size() doesn't check the error code, but just assumes it succeeds. For these reasons, let's do the initialization from the common amba bus at the device registration point. This also follows the way the PCI devices are being managed, see pci_device_add(). Suggested-by: Christoph Hellwig <hch@lst.de> Cc: Russell King <linux@armlinux.org.uk> Cc: <stable@vger.kernel.org> Tested-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20200422101013.31267-1-ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Migrating the TI nspire calculators to use the PL111 driver for framebuffer requires grayscale support for the elder panel which uses 8bit grayscale only. DRM does not support 8bit grayscale framebuffers in memory, but by defining the bus format to be MEDIA_BUS_FMT_Y8_1X8 we can get the hardware to turn on a grayscaling feature and convert the RGB framebuffer to grayscale for us. Cc: Daniel Tang <dt.tangr@gmail.com> Cc: Fabian Vogt <fabian@ritter-vogt.de> Tested-by: Fabian Vogt <fabian@ritter-vogt.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190805085847.25554-2-linus.walleij@linaro.org
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These board families are now handled in the DRM subsystem where we can have reusable panel drivers and some other stuff. The PL111 there is now the driver used in the defconfig for Versatile and Nomadik so no need to keep this code around. There are a few minor machines in arch/arm/ such as mach-netx still using the old driver, so we need to keep the core fbdev driver around for some time. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
The patches provide an update of amba_device and matching code to handle the additional registers required for the Class 0x9 (CoreSight) UCI. The *data pointer in the amba_id is used by the driver to provide extended ID register values for matching. CoreSight components where PID/CID pair is currently sufficient for unique identification need not provide this additional information. Signed-off-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>