linux-toradex.git/include/linux/bcma/bcma.h, branch v3.2.73

include: convert various register fcns to macros to avoid include chaining

2011-10-31T23:32:32+00:00

The original implementations reference THIS_MODULE in an inline.
We could include , but it is better to avoid chaining.

Fortunately someone else already thought of this, and made a similar
inline into a #define in  for device_schedule_callback(),
[see commit 523ded71de0] so follow that precedent here.

Also bubble up any __must_check that were used on the prev. wrapper inline
functions up one to the real __register functions, to preserve any prev.
sanity checks that were used in those instances.

Signed-off-by: Paul Gortmaker

bcma: add mips driver

2011-08-08T18:29:26+00:00

This adds a mips driver to bcma. This is only found on embedded
devices. For now the driver just initializes the irqs used on this
system.

Signed-off-by: Hauke Mehrtens 
Acked-by: Ralf Baechle 
Signed-off-by: John W. Linville

bcma: add SOC bus

2011-08-08T18:29:25+00:00

This patch adds support for using bcma on a Broadcom SoC as the system
bus. An SoC like the bcm4716 could register this bus and use it to
searches for the bcma cores and register the devices on this bus.

BCMA_HOSTTYPE_NONE was intended for SoCs at first but BCMA_HOSTTYPE_SOC
is a better name.

Acked-by: Rafał Miłecki 
Signed-off-by: Hauke Mehrtens 
Acked-by: Ralf Baechle 
Signed-off-by: John W. Linville

bcma: add functions to scan cores needed on SoCs

2011-08-08T18:29:24+00:00

The chip common and mips core have to be setup early in the boot
process to get the cpu clock.
bcma_bus_early_register() gets pointers to some space to store the core
data and searches for the chip common and mips core and initializes
chip common. After that was done and the kernel is out of early boot we
just have to run bcma_bus_register() and it will search for the other
cores, initialize and register them.
The cores are getting the same numbers as before.

Acked-by: Rafał Miłecki 
Signed-off-by: Hauke Mehrtens 
Acked-by: Ralf Baechle 
Signed-off-by: John W. Linville

bcma: inform drivers about translation bits needed for the core

2011-07-22T13:51:12+00:00

When using DMA, drivers need to pass special translation info to the
hardware.

Signed-off-by: Rafał Miłecki 
Signed-off-by: John W. Linville

bcma: allow enabling PLL

2011-07-19T21:03:11+00:00

Signed-off-by: Rafał Miłecki 
Signed-off-by: John W. Linville

bcma: allow setting FAST clockmode for a core

2011-07-19T21:03:11+00:00

Signed-off-by: Rafał Miłecki 
Signed-off-by: John W. Linville

bcma: trivial: add helpers for masking/setting

2011-07-19T21:03:09+00:00

Signed-off-by: Rafał Miłecki 
Signed-off-by: John W. Linville

drivers: bcma: export bcma_core_disable() function

2011-06-10T18:57:53+00:00

In the brcm80211 driver we disable the 80211 core when the driver is
'down'. The bcma_core_disable() function exactly does the same as
our implementation so exporting this function makes sense.

Cc: linux-wireless@vger.kernel.org
Cc: Rafal Milecki 
Signed-off-by: Arend van Spriel 
Signed-off-by: John W. Linville

bcma: read SPROM and extract MAC from it

2011-06-03T19:01:07+00:00

In case of BCMA cards SPROM is located in the ChipCommon core, it is
not mapped as separated host window. So far we have met only SPROMs rev
8.
SPROM layout seems to be the same as for SSB buses, so we decided to
share SPROM struct and some defines.
For now we extract MAC address only, this can be improved of course.

Signed-off-by: Rafał Miłecki 
Signed-off-by: John W. Linville