PCIe r6.0 changed the abbreviation for "Configuration Request Retry Status" Completion Status from "CRS" to "RRS" and uses the terminology of "Configuration RRS Software Visibility" instead of "CRS Software Visibility". Align the Linux usage with the r6.0 spec language. No functional change intended. It's confusing to make this change, but I think "RRS" *is* a better abbreviation because it was easy to interpret "CRS" as "Completion Retry Status", which really didn't make any sense. Link: https://lore.kernel.org/r/20240827234848.4429-4-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The <linux/bcma/bcma_driver_chipcommon.h> is including the legacy header <linux/gpio.h> to obtain struct gpio_chip. Instead, include <linux/gpio/driver.h> where this struct is defined. It turns out that the brcm80211 brcmsmac depends on this to bring in the symbol gpio_is_valid(). The driver looks up the BCMA parent GPIO driver and checks that this succeeds, but then it goes on to use the deprecated GPIO call gpio_is_valid() to check the consistency of the .base member of the BCMA GPIO struct. The whole check can be dropped because the bcma_gpio is initialized in the declarations: struct gpio_chip *bcma_gpio = &cc_drv->gpio; And this can never be NULL. Cc: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221028092332.238728-1-linus.walleij@linaro.org
On Apple platforms, the One Time Programmable ROM in the Broadcom chips contains information about the specific board design (module, vendor, version) that is required to select the correct NVRAM file. Parse this OTP ROM and extract the required strings. Note that the user OTP offset/size is per-chip. This patch does not add any chips yet. Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/E1oZDni-0077aM-I6@rmk-PC.armlinux.org.uk
Update the BCMA's chipcommon nand flash driver to detect which chip-select is used and pass that information via platform data to the brcmnand driver. Make sure that the brcmnand platform data structure is always at the beginning of the platform data of the "nflash" device created by BCMA to allow brcmnand to safely de-reference it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220107184614.2670254-7-f.fainelli@gmail.com
Kalle Valo says: ==================== wireless-drivers-next patches for 5.1 First set of patches for 5.1. Lots of new features in various drivers but nothing really special standing out. Major changes: brcmfmac * DMI nvram filename quirk for PoV TAB-P1006W-232 tablet rsi * support for hardware scan offload iwlwifi * support for Target Wakeup Time (TWT) -- a feature that allows the AP to specify when individual stations can access the medium * support for mac80211 AMSDU handling * some new PCI IDs * relicense the pcie submodule to dual GPL/BSD * reworked the TOF/CSI (channel estimation matrix) implementation * Some product name updates in the human-readable strings mt76 * energy detect regulatory compliance fixes * preparation for MT7603 support * channel switch announcement support mwifiex * support for sd8977 chipset qtnfmac * support for 4addr mode * convert to SPDX license identifiers ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
Accessing struct device is pretty useful/common so having a direct pointer: 1) Simplifies some code 2) Makes bcma_bus_get_host_dev() unneeded 3) Allows further improvements like using dev_* printing helpers Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
So far we never had any device registered for the SoC. This resulted in
some small issues that we kept ignoring like:
1) Not working GPIOLIB_IRQCHIP (gpiochip_irqchip_add_key() failing)
2) Lack of proper tree in the /sys/devices/
3) mips_dma_alloc_coherent() silently handling empty coherent_dma_mask
Kernel 4.19 came with a lot of DMA changes and caused a regression on
bcm47xx. Starting with the commit f8c55dc6e828 ("MIPS: use generic dma
noncoherent ops for simple noncoherent platforms") DMA coherent
allocations just fail. Example:
[ 1.114914] bgmac_bcma bcma0:2: Allocation of TX ring 0x200 failed
[ 1.121215] bgmac_bcma bcma0:2: Unable to alloc memory for DMA
[ 1.127626] bgmac_bcma: probe of bcma0:2 failed with error -12
[ 1.133838] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
The bgmac driver also triggers a WARNING:
[ 0.959486] ------------[ cut here ]------------
[ 0.964387] WARNING: CPU: 0 PID: 1 at ./include/linux/dma-mapping.h:516 bgmac_enet_probe+0x1b4/0x5c4
[ 0.973751] Modules linked in:
[ 0.976913] CPU: 0 PID: 1 Comm: swapper Not tainted 4.19.9 #0
[ 0.982750] Stack : 804a0000 804597c4 00000000 00000000 80458fd8 8381bc2c 838282d4 80481a47
[ 0.991367] 8042e3ec 00000001 804d38f0 00000204 83980000 00000065 8381bbe0 6f55b24f
[ 0.999975] 00000000 00000000 80520000 00002018 00000000 00000075 00000007 00000000
[ 1.008583] 00000000 80480000 000ee811 00000000 00000000 00000000 80432c00 80248db8
[ 1.017196] 00000009 00000204 83980000 803ad7b0 00000000 801feeec 00000000 804d0000
[ 1.025804] ...
[ 1.028325] Call Trace:
[ 1.030875] [<8000aef8>] show_stack+0x58/0x100
[ 1.035513] [<8001f8b4>] __warn+0xe4/0x118
[ 1.039708] [<8001f9a4>] warn_slowpath_null+0x48/0x64
[ 1.044935] [<80248db8>] bgmac_enet_probe+0x1b4/0x5c4
[ 1.050101] [<802498e0>] bgmac_probe+0x558/0x590
[ 1.054906] [<80252fd0>] bcma_device_probe+0x38/0x70
[ 1.060017] [<8020e1e8>] really_probe+0x170/0x2e8
[ 1.064891] [<8020e714>] __driver_attach+0xa4/0xec
[ 1.069784] [<8020c1e0>] bus_for_each_dev+0x58/0xb0
[ 1.074833] [<8020d590>] bus_add_driver+0xf8/0x218
[ 1.079731] [<8020ef24>] driver_register+0xcc/0x11c
[ 1.084804] [<804b54cc>] bgmac_init+0x1c/0x44
[ 1.089258] [<8000121c>] do_one_initcall+0x7c/0x1a0
[ 1.094343] [<804a1d34>] kernel_init_freeable+0x150/0x218
[ 1.099886] [<803a082c>] kernel_init+0x10/0x104
[ 1.104583] [<80005878>] ret_from_kernel_thread+0x14/0x1c
[ 1.110107] ---[ end trace f441c0d873d1fb5b ]---
This patch setups a "struct device" (and passes it to the bcma) which
allows fixing all the mentioned problems. It'll also require a tiny bcma
patch which will follow through the wireless tree & its maintainer.
Fixes: f8c55dc6e828 ("MIPS: use generic dma noncoherent ops for simple noncoherent platforms")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-wireless@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v4.19+
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This typo is quite common. Fix it and add it to the spelling file so that checkpatch catches it earlier. Link: http://lkml.kernel.org/r/20170317011131.6881-2-sboyd@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We have generic place & helpers for storing platform driver data so there is no reason for using custom priv pointer. This allows cleaning up struct bcma_sflash from unneeded fields. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>