linux-toradex.git/include/linux/can, branch v4.12-rc4

can: complete initial namespace support

2017-04-25T07:04:29+00:00

The statistics and its proc output was not implemented as per-net in the
initial network namespace support by Mario Kicherer (8e8cda6d737d).
This patch adds the missing per-net statistics for the CAN subsystem.

Signed-off-by: Oliver Hartkopp 
Signed-off-by: Marc Kleine-Budde

can: peak: add support for PEAK PCAN-PCIe FD CAN-FD boards

2017-04-25T07:00:45+00:00

This patch adds the support of the PCAN-PCI Express FD boards made
by PEAK-System, for computers using the PCI Express slot.

The PCAN-PCI Express FD has one or two CAN FD channels, depending
on the model. A galvanic isolation of the CAN ports protects
the electronics of the card and the respective computer against
disturbances of up to 500 Volts. The PCAN-PCI Express FD can be operated
with ambient temperatures in a range of -40 to +85 °C.

Such boards run an extented version of the CAN-FD IP running into USB
CAN-FD interfaces from PEAK-System, so this patch adds several new commands
and their corresponding data types to the PEAK CAN-FD common definitions
header file too.

Signed-off-by: Stephane Grosjean 
Signed-off-by: Marc Kleine-Budde

can: peak: move header file to new can common subdir

2017-04-25T07:00:44+00:00

The CAN-FD IP from PEAK-System runs into several kinds of PC CAN-FD
interfaces. Up to now, only the USB CAN-FD adapters were supported by
the Kernel. In order to prepare the adding of some new non-USB CAN-FD
interfaces, this patch moves - and rename - the IP definitions file
from its private (usb) sub-directory into a - newly created - CAN specific
one.

Signed-off-by: Stephane Grosjean 
Signed-off-by: Marc Kleine-Budde

can: initial support for network namespaces

2017-04-04T15:35:58+00:00

This patch adds initial support for network namespaces. The changes only
enable support in the CAN raw, proc and af_can code. GW and BCM still
have their checks that ensure that they are used only from the main
namespace.

The patch boils down to moving the global structures, i.e. the global
filter list and their /proc stats, into a per-namespace structure and passing
around the corresponding "struct net" in a lot of different places.

Changes since v1:
 - rebased on current HEAD (2bfe01e)
 - fixed overlong line

Signed-off-by: Mario Kicherer 
Signed-off-by: Marc Kleine-Budde

can: ti_hecc: Convert TI HECC driver to DT only driver

2017-04-04T14:55:26+00:00

This patch converts TI HECC driver to DT only driver. This results in
removing ti_hecc.h containing now obsolete platform data.

Former transceiver_switch callback function will be now modelled via
regulator API.

Signed-off-by: Anton Glukhov 
Signed-off-by: Yegor Yefremov 
Signed-off-by: Marc Kleine-Budde

can: rx-offload: Add support for timestamp based irq offloading

2017-02-06T14:13:24+00:00

Some CAN controllers don't implement a FIFO in hardware, but fill their
mailboxes in a particular order (from lowest to highest or highest to lowest).
This makes problems to read the frames in the correct order from the hardware,
as new frames might be filled into just read (low) mailboxes. This gets worse,
when following new frames are received into not read (higher) mailboxes.

On the bright side some these CAN controllers put a timestamp on each received
CAN frame. This patch adds support to offload CAN frames in interrupt context,
order them by timestamp and then transmitted in a NAPI context.

Signed-off-by: Marc Kleine-Budde

can: rx-offload: Add support for HW fifo based irq offloading

2017-02-06T14:13:23+00:00

Some CAN controllers have a usable FIFO already but can still benefit
from off-loading the CAN controller FIFO. The CAN frames of the FIFO are
read and put into a skb queue during interrupt and then transmitted in a
NAPI context.

Signed-off-by: David Jander 
Signed-off-by: Marc Kleine-Budde

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2017-02-02T21:54:00+00:00

All merge conflicts were simple overlapping changes.

Signed-off-by: David S. Miller

can: Fix kernel panic at security_sock_rcv_skb

2017-01-29T23:30:56+00:00

Zhang Yanmin reported crashes [1] and provided a patch adding a
synchronize_rcu() call in can_rx_unregister()

The main problem seems that the sockets themselves are not RCU
protected.

If CAN uses RCU for delivery, then sockets should be freed only after
one RCU grace period.

Recent kernels could use sock_set_flag(sk, SOCK_RCU_FREE), but let's
ease stable backports with the following fix instead.

[1]
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [] selinux_socket_sock_rcv_skb+0x65/0x2a0

Call Trace:
 
 [] security_sock_rcv_skb+0x4c/0x60
 [] sk_filter+0x41/0x210
 [] sock_queue_rcv_skb+0x53/0x3a0
 [] raw_rcv+0x2a3/0x3c0
 [] can_rcv_filter+0x12b/0x370
 [] can_receive+0xd9/0x120
 [] can_rcv+0xab/0x100
 [] __netif_receive_skb_core+0xd8c/0x11f0
 [] __netif_receive_skb+0x24/0xb0
 [] process_backlog+0x127/0x280
 [] net_rx_action+0x33b/0x4f0
 [] __do_softirq+0x184/0x440
 [] do_softirq_own_stack+0x1c/0x30
 
 [] do_softirq.part.18+0x3b/0x40
 [] do_softirq+0x1d/0x20
 [] netif_rx_ni+0xe5/0x110
 [] slcan_receive_buf+0x507/0x520
 [] flush_to_ldisc+0x21c/0x230
 [] process_one_work+0x24f/0x670
 [] worker_thread+0x9d/0x6f0
 [] ? rescuer_thread+0x480/0x480
 [] kthread+0x12c/0x150
 [] ret_from_fork+0x3f/0x70

Reported-by: Zhang Yanmin 
Signed-off-by: Eric Dumazet 
Acked-by: Oliver Hartkopp 
Signed-off-by: David S. Miller

can: dev: add CAN interface API for fixed bitrates

2017-01-24T12:52:00+00:00

Some CAN interfaces only support fixed fixed bitrates. This patch adds a
netlink interface to get the list of the CAN interface's fixed bitrates and
data bitrates.

Inside the driver arrays of supported data- bitrate values are defined.

const u32 drvname_bitrate[] = { 20000, 50000, 100000 };
const u32 drvname_data_bitrate[] = { 200000, 500000, 1000000 };

struct drvname_priv *priv;
priv = netdev_priv(dev);

priv->bitrate_const = drvname_bitrate;
priv->bitrate_const_cnt = ARRAY_SIZE(drvname_bitrate);
priv->data_bitrate_const = drvname_data_bitrate;
priv->data_bitrate_const_cnt = ARRAY_SIZE(drvname_data_bitrate);

Signed-off-by: Marc Kleine-Budde