linux-toradex.git/include/linux/ceph, branch v4.6-rc6

libceph: make authorizer destruction independent of ceph_auth_client

2016-04-25T18:54:13+00:00

Starting the kernel client with cephx disabled and then enabling cephx
and restarting userspace daemons can result in a crash:

    [262671.478162] BUG: unable to handle kernel paging request at ffffebe000000000
    [262671.531460] IP: [] kfree+0x5a/0x130
    [262671.584334] PGD 0
    [262671.635847] Oops: 0000 [#1] SMP
    [262672.055841] CPU: 22 PID: 2961272 Comm: kworker/22:2 Not tainted 4.2.0-34-generic #39~14.04.1-Ubuntu
    [262672.162338] Hardware name: Dell Inc. PowerEdge R720/068CDY, BIOS 2.4.3 07/09/2014
    [262672.268937] Workqueue: ceph-msgr con_work [libceph]
    [262672.322290] task: ffff88081c2d0dc0 ti: ffff880149ae8000 task.ti: ffff880149ae8000
    [262672.428330] RIP: 0010:[]  [] kfree+0x5a/0x130
    [262672.535880] RSP: 0018:ffff880149aeba58  EFLAGS: 00010286
    [262672.589486] RAX: 000001e000000000 RBX: 0000000000000012 RCX: ffff8807e7461018
    [262672.695980] RDX: 000077ff80000000 RSI: ffff88081af2be04 RDI: 0000000000000012
    [262672.803668] RBP: ffff880149aeba78 R08: 0000000000000000 R09: 0000000000000000
    [262672.912299] R10: ffffebe000000000 R11: ffff880819a60e78 R12: ffff8800aec8df40
    [262673.021769] R13: ffffffffc035f70f R14: ffff8807e5b138e0 R15: ffff880da9785840
    [262673.131722] FS:  0000000000000000(0000) GS:ffff88081fac0000(0000) knlGS:0000000000000000
    [262673.245377] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    [262673.303281] CR2: ffffebe000000000 CR3: 0000000001c0d000 CR4: 00000000001406e0
    [262673.417556] Stack:
    [262673.472943]  ffff880149aeba88 ffff88081af2be04 ffff8800aec8df40 ffff88081af2be04
    [262673.583767]  ffff880149aeba98 ffffffffc035f70f ffff880149aebac8 ffff8800aec8df00
    [262673.694546]  ffff880149aebac8 ffffffffc035c89e ffff8807e5b138e0 ffff8805b047f800
    [262673.805230] Call Trace:
    [262673.859116]  [] ceph_x_destroy_authorizer+0x1f/0x50 [libceph]
    [262673.968705]  [] ceph_auth_destroy_authorizer+0x3e/0x60 [libceph]
    [262674.078852]  [] put_osd+0x45/0x80 [libceph]
    [262674.134249]  [] remove_osd+0xae/0x140 [libceph]
    [262674.189124]  [] __reset_osd+0x103/0x150 [libceph]
    [262674.243749]  [] kick_requests+0x223/0x460 [libceph]
    [262674.297485]  [] ceph_osdc_handle_map+0x282/0x5e0 [libceph]
    [262674.350813]  [] dispatch+0x4e/0x720 [libceph]
    [262674.403312]  [] try_read+0x3d1/0x1090 [libceph]
    [262674.454712]  [] ? dequeue_entity+0x152/0x690
    [262674.505096]  [] con_work+0xcb/0x1300 [libceph]
    [262674.555104]  [] process_one_work+0x14e/0x3d0
    [262674.604072]  [] worker_thread+0x11a/0x470
    [262674.652187]  [] ? rescuer_thread+0x310/0x310
    [262674.699022]  [] kthread+0xd2/0xf0
    [262674.744494]  [] ? kthread_create_on_node+0x1c0/0x1c0
    [262674.789543]  [] ret_from_fork+0x3f/0x70
    [262674.834094]  [] ? kthread_create_on_node+0x1c0/0x1c0

What happens is the following:

    (1) new MON session is established
    (2) old "none" ac is destroyed
    (3) new "cephx" ac is constructed
    ...
    (4) old OSD session (w/ "none" authorizer) is put
          ceph_auth_destroy_authorizer(ac, osd->o_auth.authorizer)

osd->o_auth.authorizer in the "none" case is just a bare pointer into
ac, which contains a single static copy for all services.  By the time
we get to (4), "none" ac, freed in (2), is long gone.  On top of that,
a new vtable installed in (3) points us at ceph_x_destroy_authorizer(),
so we end up trying to destroy a "none" authorizer with a "cephx"
destructor operating on invalid memory!

To fix this, decouple authorizer destruction from ac and do away with
a single static "none" authorizer by making a copy for each OSD or MDS
session.  Authorizers themselves are independent of ac and so there is
no reason for destroy_authorizer() to be an ac op.  Make it an op on
the authorizer itself by turning ceph_authorizer into a real struct.

Fixes: http://tracker.ceph.com/issues/15447

Reported-by: Alan Zhang 
Signed-off-by: Ilya Dryomov 
Reviewed-by: Sage Weil

mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros

2016-04-04T17:41:08+00:00

PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.

This promise never materialized.  And unlikely will.

We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE.  And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.

Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.

Let's stop pretending that pages in page cache are special.  They are
not.

The changes are pretty straight-forward:

 -  << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> ;

 -  >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> ;

 - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};

 - page_cache_get() -> get_page();

 - page_cache_release() -> put_page();

This patch contains automated changes generated with coccinelle using
script below.  For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.

The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.

There are few places in the code where coccinelle didn't reach.  I'll
fix them manually in a separate patch.  Comments and documentation also
will be addressed with the separate patch.

virtual patch

@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT

@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE

@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK

@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)

@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)

@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)

Signed-off-by: Kirill A. Shutemov 
Acked-by: Michal Hocko 
Signed-off-by: Linus Torvalds

ceph: fix security xattr deadlock

2016-03-25T17:51:55+00:00

When security is enabled, security module can call filesystem's
getxattr/setxattr callbacks during d_instantiate(). For cephfs,
d_instantiate() is usually called by MDS' dispatch thread, while
handling MDS reply. If the MDS reply does not include xattrs and
corresponding caps, getxattr/setxattr need to send a new request
to MDS and waits for the reply. This makes MDS' dispatch sleep,
nobody handles later MDS replies.

The fix is make sure lookup/atomic_open reply include xattrs and
corresponding caps. So getxattr can be handled by cached xattrs.
This requires some modification to both MDS and request message.
(Client tells MDS what caps it wants; MDS encodes proper caps in
the reply)

Smack security module may call setxattr during d_instantiate().
Unlike getxattr, we can't force MDS to issue CEPH_CAP_XATTR_EXCL
to us. So just make setxattr return error when called by MDS'
dispatch thread.

Signed-off-by: Yan, Zheng

libceph: add helper that duplicates last extent operation

2016-03-25T17:51:43+00:00

This helper duplicates last extent operation in OSD request, then
adjusts the new extent operation's offset and length. The helper
is for scatterd page writeback, which adds nonconsecutive dirty
pages to single OSD request.

Signed-off-by: Yan, Zheng 
Signed-off-by: Ilya Dryomov

libceph: enable large, variable-sized OSD requests

2016-03-25T17:51:43+00:00

Turn r_ops into a flexible array member to enable large, consisting of
up to 16 ops, OSD requests.  The use case is scattered writeback in
cephfs and, as far as the kernel client is concerned, 16 is just a made
up number.

r_ops had size 3 for copyup+hint+write, but copyup is really a special
case - it can only happen once.  ceph_osd_request_cache is therefore
stuffed with num_ops=2 requests, anything bigger than that is allocated
with kmalloc().  req_mempool is backed by ceph_osd_request_cache, which
means either num_ops=1 or num_ops=2 for use_mempool=true - all existing
users (ceph_writepages_start(), ceph_osdc_writepages()) are fine with
that.

Signed-off-by: Ilya Dryomov

libceph: move r_reply_op_{len,result} into struct ceph_osd_req_op

2016-03-25T17:51:42+00:00

This avoids defining large array of r_reply_op_{len,result} in
in struct ceph_osd_request.

Signed-off-by: Yan, Zheng 
Signed-off-by: Ilya Dryomov

libceph: rename ceph_osd_req_op::payload_len to indata_len

2016-03-25T17:51:41+00:00

Follow userspace nomenclature on this - the next commit adds
outdata_len.

Signed-off-by: Ilya Dryomov

libceph: monc hunt rate is 3s with backoff up to 30s

2016-03-25T17:51:39+00:00

Unless we are in the process of setting up a client (i.e. connecting to
the monitor cluster for the first time), apply a backoff: every time we
want to reopen a session, increase our timeout by a multiple (currently
2); when we complete the connection, reduce that multipler by 50%.

Mirrors ceph.git commit 794c86fd289bd62a35ed14368fa096c46736e9a2.

Signed-off-by: Ilya Dryomov

libceph: monc ping rate is 10s

2016-03-25T17:51:39+00:00

Split ping interval and ping timeout: ping interval is 10s; keepalive
timeout is 30s.

Make monc_ping_timeout a constant while at it - it's not actually
exported as a mount option (and the rest of tick-related settings won't
be either), so it's got no place in ceph_options.

Signed-off-by: Ilya Dryomov

libceph: revamp subs code, switch to SUBSCRIBE2 protocol

2016-03-25T17:51:38+00:00

It is currently hard-coded in the mon_client that mdsmap and monmap
subs are continuous, while osdmap sub is always "onetime".  To better
handle full clusters/pools in the osd_client, we need to be able to
issue continuous osdmap subs.  Revamp subs code to allow us to specify
for each sub whether it should be continuous or not.

Although not strictly required for the above, switch to SUBSCRIBE2
protocol while at it, eliminating the ambiguity between a request for
"every map since X" and a request for "just the latest" when we don't
have a map yet (i.e. have epoch 0).  SUBSCRIBE2 feature bit is now
required - it's been supported since pre-argonaut (2010).

Move "got mdsmap" call to the end of ceph_mdsc_handle_map() - calling
in before we validate the epoch and successfully install the new map
can mess up mon_client sub state.

Signed-off-by: Ilya Dryomov